Class: Aws::MediaConvert::Types::H265Settings

Inherits:

Struct

Object
Struct
Aws::MediaConvert::Types::H265Settings

show all

Includes:: Structure

Defined in:: lib/aws-sdk-mediaconvert/types.rb

Overview

Note:

When making an API call, you may pass H265Settings data as a hash:

{
  adaptive_quantization: "OFF", # accepts OFF, LOW, MEDIUM, HIGH, HIGHER, MAX, AUTO
  alternate_transfer_function_sei: "DISABLED", # accepts DISABLED, ENABLED
  bitrate: 1,
  codec_level: "AUTO", # accepts AUTO, LEVEL_1, LEVEL_2, LEVEL_2_1, LEVEL_3, LEVEL_3_1, LEVEL_4, LEVEL_4_1, LEVEL_5, LEVEL_5_1, LEVEL_5_2, LEVEL_6, LEVEL_6_1, LEVEL_6_2
  codec_profile: "MAIN_MAIN", # accepts MAIN_MAIN, MAIN_HIGH, MAIN10_MAIN, MAIN10_HIGH, MAIN_422_8BIT_MAIN, MAIN_422_8BIT_HIGH, MAIN_422_10BIT_MAIN, MAIN_422_10BIT_HIGH
  dynamic_sub_gop: "ADAPTIVE", # accepts ADAPTIVE, STATIC
  flicker_adaptive_quantization: "DISABLED", # accepts DISABLED, ENABLED
  framerate_control: "INITIALIZE_FROM_SOURCE", # accepts INITIALIZE_FROM_SOURCE, SPECIFIED
  framerate_conversion_algorithm: "DUPLICATE_DROP", # accepts DUPLICATE_DROP, INTERPOLATE, FRAMEFORMER
  framerate_denominator: 1,
  framerate_numerator: 1,
  gop_b_reference: "DISABLED", # accepts DISABLED, ENABLED
  gop_closed_cadence: 1,
  gop_size: 1.0,
  gop_size_units: "FRAMES", # accepts FRAMES, SECONDS, AUTO
  hrd_buffer_final_fill_percentage: 1,
  hrd_buffer_initial_fill_percentage: 1,
  hrd_buffer_size: 1,
  interlace_mode: "PROGRESSIVE", # accepts PROGRESSIVE, TOP_FIELD, BOTTOM_FIELD, FOLLOW_TOP_FIELD, FOLLOW_BOTTOM_FIELD
  max_bitrate: 1,
  min_i_interval: 1,
  number_b_frames_between_reference_frames: 1,
  number_reference_frames: 1,
  par_control: "INITIALIZE_FROM_SOURCE", # accepts INITIALIZE_FROM_SOURCE, SPECIFIED
  par_denominator: 1,
  par_numerator: 1,
  quality_tuning_level: "SINGLE_PASS", # accepts SINGLE_PASS, SINGLE_PASS_HQ, MULTI_PASS_HQ
  qvbr_settings: {
    max_average_bitrate: 1,
    qvbr_quality_level: 1,
    qvbr_quality_level_fine_tune: 1.0,
  },
  rate_control_mode: "VBR", # accepts VBR, CBR, QVBR
  sample_adaptive_offset_filter_mode: "DEFAULT", # accepts DEFAULT, ADAPTIVE, OFF
  scan_type_conversion_mode: "INTERLACED", # accepts INTERLACED, INTERLACED_OPTIMIZE
  scene_change_detect: "DISABLED", # accepts DISABLED, ENABLED, TRANSITION_DETECTION
  slices: 1,
  slow_pal: "DISABLED", # accepts DISABLED, ENABLED
  spatial_adaptive_quantization: "DISABLED", # accepts DISABLED, ENABLED
  telecine: "NONE", # accepts NONE, SOFT, HARD
  temporal_adaptive_quantization: "DISABLED", # accepts DISABLED, ENABLED
  temporal_ids: "DISABLED", # accepts DISABLED, ENABLED
  tiles: "DISABLED", # accepts DISABLED, ENABLED
  unregistered_sei_timecode: "DISABLED", # accepts DISABLED, ENABLED
  write_mp_4_packaging_type: "HVC1", # accepts HVC1, HEV1
}

Settings for H265 codec

Constant Summary collapse

SENSITIVE =

[]

Instance Attribute Summary collapse

#adaptive_quantization ⇒ String

When you set Adaptive Quantization (H265AdaptiveQuantization) to Auto (AUTO), or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
#alternate_transfer_function_sei ⇒ String

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
#bitrate ⇒ Integer

Specify the average bitrate in bits per second.
#codec_level ⇒ String

H.265 Level.
#codec_profile ⇒ String

Represents the Profile and Tier, per the HEVC (H.265) specification.
#dynamic_sub_gop ⇒ String

Choose Adaptive to improve subjective video quality for high-motion content.
#flicker_adaptive_quantization ⇒ String

Enable this setting to have the encoder reduce I-frame pop.
#framerate_control ⇒ String

If you are using the console, use the Framerate setting to specify the frame rate for this output.
#framerate_conversion_algorithm ⇒ String

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
#framerate_denominator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
#framerate_numerator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
#gop_b_reference ⇒ String

If enable, use reference B frames for GOP structures that have B frames > 1.
#gop_closed_cadence ⇒ Integer

Specify the relative frequency of open to closed GOPs in this output.
#gop_size ⇒ Float

Use this setting only when you set GOP mode control (GopSizeUnits) to Specified, frames (FRAMES) or Specified, seconds (SECONDS).
#gop_size_units ⇒ String

Specify how the transcoder determines GOP size for this output.
#hrd_buffer_final_fill_percentage ⇒ Integer

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment.
#hrd_buffer_initial_fill_percentage ⇒ Integer

Percentage of the buffer that should initially be filled (HRD buffer model).
#hrd_buffer_size ⇒ Integer

Size of buffer (HRD buffer model) in bits.
#interlace_mode ⇒ String

Choose the scan line type for the output.
#max_bitrate ⇒ Integer

Maximum bitrate in bits/second.
#min_i_interval ⇒ Integer

Use this setting only when you also enable Scene change detection (SceneChangeDetect).
#number_b_frames_between_reference_frames ⇒ Integer

Specify the number of B-frames that MediaConvert puts between reference frames in this output.
#number_reference_frames ⇒ Integer

Number of reference frames to use.
#par_control ⇒ String

Optional.
#par_denominator ⇒ Integer

Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
#par_numerator ⇒ Integer

Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
#quality_tuning_level ⇒ String

Optional.
#qvbr_settings ⇒ Types::H265QvbrSettings

Settings for quality-defined variable bitrate encoding with the H.265 codec.
#rate_control_mode ⇒ String

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
#sample_adaptive_offset_filter_mode ⇒ String

Specify Sample Adaptive Offset (SAO) filter strength.
#scan_type_conversion_mode ⇒ String

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
#scene_change_detect ⇒ String

Enable this setting to insert I-frames at scene changes that the service automatically detects.
#slices ⇒ Integer

Number of slices per picture.
#slow_pal ⇒ String

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
#spatial_adaptive_quantization ⇒ String

Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity.
#telecine ⇒ String

This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
#temporal_adaptive_quantization ⇒ String

Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity.
#temporal_ids ⇒ String

Enables temporal layer identifiers in the encoded bitstream.
#tiles ⇒ String

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
#unregistered_sei_timecode ⇒ String

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
#write_mp_4_packaging_type ⇒ String

If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.

Instance Attribute Details

#adaptive_quantization ⇒ `String`

When you set Adaptive Quantization (H265AdaptiveQuantization) to Auto (AUTO), or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low (LOW), Medium (MEDIUM), High (HIGH), Higher (HIGHER), or Max (MAX) to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization (H265SpatialAdaptiveQuantization), Temporal Adaptive Quantization (H265TemporalAdaptiveQuantization), and Flicker Adaptive Quantization (H265FlickerAdaptiveQuantization), to further control the quantization filter. Set Adaptive Quantization to Off (OFF) to apply no quantization to your output.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#alternate_transfer_function_sei ⇒ `String`

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#bitrate ⇒ `Integer`

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#codec_level ⇒ `String`

H.265 Level.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#codec_profile ⇒ `String`

Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so “Main/High” represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#dynamic_sub_gop ⇒ `String`

Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#flicker_adaptive_quantization ⇒ `String`

Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off (OFF).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_control ⇒ `String`

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_conversion_algorithm ⇒ `String`

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_denominator ⇒ `Integer`

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_numerator ⇒ `Integer`

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_b_reference ⇒ `String`

If enable, use reference B frames for GOP structures that have B frames > 1.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_closed_cadence ⇒ `Integer`

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, keep the default value by leaving this setting out of your JSON job specification. In the console, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size ⇒ `Float`

Use this setting only when you set GOP mode control (GopSizeUnits) to Specified, frames (FRAMES) or Specified, seconds (SECONDS). Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control (GopSizeUnits). If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto (AUTO). If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

Returns:

(Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size_units ⇒ `String`

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto (AUTO) and and leave GOP size (GopSize) blank. By default, if you don't specify GOP mode control (GopSizeUnits), MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames (FRAMES) or Specified, seconds (SECONDS) and then provide the GOP length in the related setting GOP size (GopSize).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_final_fill_percentage ⇒ `Integer`

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_initial_fill_percentage ⇒ `Integer`

Percentage of the buffer that should initially be filled (HRD buffer model).

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_size ⇒ `Integer`

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#interlace_mode ⇒ `String`

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#max_bitrate ⇒ `Integer`

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#min_i_interval ⇒ `Integer`

Use this setting only when you also enable Scene change detection (SceneChangeDetect). This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, keep the default value by leaving this setting out of your JSON job specification. In the console, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval (minIInterval) to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#number_b_frames_between_reference_frames ⇒ `Integer`

Specify the number of B-frames that MediaConvert puts between reference frames in this output. Valid values are whole numbers from 0 through 7. When you don't specify a value, MediaConvert defaults to 2.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#number_reference_frames ⇒ `Integer`

Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_control ⇒ `String`

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_denominator ⇒ `Integer`

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_numerator ⇒ `Integer`

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#quality_tuning_level ⇒ `String`

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#qvbr_settings ⇒ `Types::H265QvbrSettings`

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode (RateControlMode).

Returns:

(Types::H265QvbrSettings)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#rate_control_mode ⇒ `String`

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#sample_adaptive_offset_filter_mode ⇒ `String`

Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#scan_type_conversion_mode ⇒ `String`

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#scene_change_detect ⇒ `String`

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#slices ⇒ `Integer`

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#slow_pal ⇒ `String`

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#spatial_adaptive_quantization ⇒ `String`

Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization (adaptiveQuantization) depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#telecine ⇒ `String`

This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#temporal_adaptive_quantization ⇒ `String`

Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization (adaptiveQuantization).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#temporal_ids ⇒ `String`

Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#tiles ⇒ `String`

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#unregistered_sei_timecode ⇒ `String`

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#write_mp_4_packaging_type ⇒ `String`

If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 11078

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

Class: Aws::MediaConvert::Types::H265Settings

Overview

Constant Summary collapse

Instance Attribute Summary collapse

Instance Attribute Details

#adaptive_quantization ⇒ String

#alternate_transfer_function_sei ⇒ String

#bitrate ⇒ Integer

#codec_level ⇒ String

#codec_profile ⇒ String

#dynamic_sub_gop ⇒ String

#flicker_adaptive_quantization ⇒ String

#framerate_control ⇒ String

#framerate_conversion_algorithm ⇒ String

#framerate_denominator ⇒ Integer

#framerate_numerator ⇒ Integer

#gop_b_reference ⇒ String

#gop_closed_cadence ⇒ Integer

#gop_size ⇒ Float

#gop_size_units ⇒ String

#hrd_buffer_final_fill_percentage ⇒ Integer

#hrd_buffer_initial_fill_percentage ⇒ Integer

#hrd_buffer_size ⇒ Integer

#interlace_mode ⇒ String

#max_bitrate ⇒ Integer

#min_i_interval ⇒ Integer

#number_b_frames_between_reference_frames ⇒ Integer

#number_reference_frames ⇒ Integer

#par_control ⇒ String

#par_denominator ⇒ Integer

#par_numerator ⇒ Integer

#quality_tuning_level ⇒ String

#qvbr_settings ⇒ Types::H265QvbrSettings

#rate_control_mode ⇒ String

#sample_adaptive_offset_filter_mode ⇒ String

#scan_type_conversion_mode ⇒ String

#scene_change_detect ⇒ String

#slices ⇒ Integer

#slow_pal ⇒ String

#spatial_adaptive_quantization ⇒ String

#telecine ⇒ String

#temporal_adaptive_quantization ⇒ String

#temporal_ids ⇒ String

#tiles ⇒ String

#unregistered_sei_timecode ⇒ String

#write_mp_4_packaging_type ⇒ String

#adaptive_quantization ⇒ `String`

#alternate_transfer_function_sei ⇒ `String`

#bitrate ⇒ `Integer`

#codec_level ⇒ `String`

#codec_profile ⇒ `String`

#dynamic_sub_gop ⇒ `String`

#flicker_adaptive_quantization ⇒ `String`

#framerate_control ⇒ `String`

#framerate_conversion_algorithm ⇒ `String`

#framerate_denominator ⇒ `Integer`

#framerate_numerator ⇒ `Integer`

#gop_b_reference ⇒ `String`

#gop_closed_cadence ⇒ `Integer`

#gop_size ⇒ `Float`

#gop_size_units ⇒ `String`

#hrd_buffer_final_fill_percentage ⇒ `Integer`

#hrd_buffer_initial_fill_percentage ⇒ `Integer`

#hrd_buffer_size ⇒ `Integer`

#interlace_mode ⇒ `String`

#max_bitrate ⇒ `Integer`

#min_i_interval ⇒ `Integer`

#number_b_frames_between_reference_frames ⇒ `Integer`

#number_reference_frames ⇒ `Integer`

#par_control ⇒ `String`

#par_denominator ⇒ `Integer`

#par_numerator ⇒ `Integer`

#quality_tuning_level ⇒ `String`

#qvbr_settings ⇒ `Types::H265QvbrSettings`

#rate_control_mode ⇒ `String`

#sample_adaptive_offset_filter_mode ⇒ `String`

#scan_type_conversion_mode ⇒ `String`

#scene_change_detect ⇒ `String`

#slices ⇒ `Integer`

#slow_pal ⇒ `String`

#spatial_adaptive_quantization ⇒ `String`

#telecine ⇒ `String`

#temporal_adaptive_quantization ⇒ `String`

#temporal_ids ⇒ `String`

#tiles ⇒ `String`

#unregistered_sei_timecode ⇒ `String`

#write_mp_4_packaging_type ⇒ `String`