Class: Aws::MediaConvert::Types::Eac3Settings

Inherits:

Struct

• Object
• Struct
• Aws::MediaConvert::Types::Eac3Settings

Includes:

Structure

Defined in:

lib/aws-sdk-mediaconvert/types.rb

Overview

Required when you set Codec to the value EAC3.

See Also:

• AWS API Documentation

Constant Summary

SENSITIVE =

[]

Instance Attribute Summary

• #attenuation_control ⇒ String

  If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels.

• #bitrate ⇒ Integer

  Specify the average bitrate in bits per second.

• #bitstream_mode ⇒ String

  Specify the bitstream mode for the E-AC-3 stream that the encoder emits.

• #coding_mode ⇒ String

  Dolby Digital Plus coding mode.

• #dc_filter ⇒ String

  Activates a DC highpass filter for all input channels.

• #dialnorm ⇒ Integer

  Sets the dialnorm for the output.

• #dynamic_range_compression_line ⇒ String

  Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode.

• #dynamic_range_compression_rf ⇒ String

  Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode.

• #lfe_control ⇒ String

  When encoding 3/2 audio, controls whether the LFE channel is enabled.

• #lfe_filter ⇒ String

  Applies a 120Hz lowpass filter to the LFE channel prior to encoding.

• #lo_ro_center_mix_level ⇒ Float

  Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix.

• #lo_ro_surround_mix_level ⇒ Float

  Specify a value for the following Dolby Digital Plus setting: Left only/Right only.

• #lt_rt_center_mix_level ⇒ Float

  Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix.

• #lt_rt_surround_mix_level ⇒ Float

  Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix.

• #metadata_control ⇒ String

  When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data.

• #passthrough_control ⇒ String

  When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input.

• #phase_control ⇒ String

  Controls the amount of phase-shift applied to the surround channels.

• #sample_rate ⇒ Integer

  This value is always 48000.

• #stereo_downmix ⇒ String

  Choose how the service does stereo downmixing.

• #surround_ex_mode ⇒ String

  When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

• #surround_mode ⇒ String

  When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

Instance Attribute Details

#attenuation_control ⇒ String

If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#bitrate ⇒ Integer

Specify the average bitrate in bits per second. The bitrate that you specify must be a multiple of 8000 within the allowed minimum and maximum values. Leave blank to use the default bitrate for the coding mode you select according ETSI TS 102 366. Valid bitrates for coding mode 1/0: Default: 96000. Minimum: 32000. Maximum: 3024000. Valid bitrates for coding mode 2/0: Default: 192000. Minimum: 96000. Maximum: 3024000. Valid bitrates for coding mode 3/2: Default:

1. Minimum: 192000. Maximum: 3024000.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#bitstream_mode ⇒ String

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#coding_mode ⇒ String

Dolby Digital Plus coding mode. Determines number of channels.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#dc_filter ⇒ String

Activates a DC highpass filter for all input channels.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#dialnorm ⇒ Integer

Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#dynamic_range_compression_line ⇒ String

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#dynamic_range_compression_rf ⇒ String

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lfe_control ⇒ String

When encoding 3/2 audio, controls whether the LFE channel is enabled

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lfe_filter ⇒ String

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lo_ro_center_mix_level ⇒ Float

Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left only/Right only center.

Returns:

• (Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lo_ro_surround_mix_level ⇒ Float

Specify a value for the following Dolby Digital Plus setting: Left only/Right only. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left only/Right only surround.

Returns:

• (Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lt_rt_center_mix_level ⇒ Float

Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left total/Right total center.

Returns:

• (Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#lt_rt_surround_mix_level ⇒ Float

Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left total/Right total surround.

Returns:

• (Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#metadata_control ⇒ String

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#passthrough_control ⇒ String

When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#phase_control ⇒ String

Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#sample_rate ⇒ Integer

This value is always 48000. It represents the sample rate in Hz.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#stereo_downmix ⇒ String

Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Stereo downmix.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#surround_ex_mode ⇒ String

When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end

#surround_mode ⇒ String

When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 4659

class Eac3Settings < Struct.new(
  :attenuation_control,
  :bitrate,
  :bitstream_mode,
  :coding_mode,
  :dc_filter,
  :dialnorm,
  :dynamic_range_compression_line,
  :dynamic_range_compression_rf,
  :lfe_control,
  :lfe_filter,
  :lo_ro_center_mix_level,
  :lo_ro_surround_mix_level,
  :lt_rt_center_mix_level,
  :lt_rt_surround_mix_level,
  :metadata_control,
  :passthrough_control,
  :phase_control,
  :sample_rate,
  :stereo_downmix,
  :surround_ex_mode,
  :surround_mode)
  SENSITIVE = []
  include Aws::Structure
end