Class: Aws::ElastiCache::Types::CreateReplicationGroupMessage

Inherits:

Struct

Object
Struct
Aws::ElastiCache::Types::CreateReplicationGroupMessage

show all

Includes:: Structure

Defined in:: lib/aws-sdk-elasticache/types.rb

Overview

Represents the input of a ‘CreateReplicationGroup` operation.

Constant Summary collapse

SENSITIVE =

[]

Instance Attribute Summary collapse

#at_rest_encryption_enabled ⇒ Boolean

A flag that enables encryption at rest when set to ‘true`.
#auth_token ⇒ String

**Reserved parameter.** The password used to access a password protected server.
#auto_minor_version_upgrade ⇒ Boolean

If you are running Valkey 7.2 and above or Redis OSS engine version 6.0 and above, set this parameter to yes to opt-in to the next auto minor version upgrade campaign.
#automatic_failover_enabled ⇒ Boolean

Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.
#cache_node_type ⇒ String

The compute and memory capacity of the nodes in the node group (shard).
#cache_parameter_group_name ⇒ String

The name of the parameter group to associate with this replication group.
#cache_security_group_names ⇒ Array<String>

A list of cache security group names to associate with this replication group.
#cache_subnet_group_name ⇒ String

The name of the cache subnet group to be used for the replication group.
#cluster_mode ⇒ String

Enabled or Disabled.
#data_tiering_enabled ⇒ Boolean

Enables data tiering.
#engine ⇒ String

The name of the cache engine to be used for the clusters in this replication group.
#engine_version ⇒ String

The version number of the cache engine to be used for the clusters in this replication group.
#global_replication_group_id ⇒ String

The name of the Global datastore.
#ip_discovery ⇒ String

The network type you choose when creating a replication group, either ‘ipv4` | `ipv6`.
#kms_key_id ⇒ String

The ID of the KMS key used to encrypt the disk in the cluster.
#log_delivery_configurations ⇒ Array<Types::LogDeliveryConfigurationRequest>

Specifies the destination, format and type of the logs.
#multi_az_enabled ⇒ Boolean

A flag indicating if you have Multi-AZ enabled to enhance fault tolerance.
#network_type ⇒ String

Must be either ‘ipv4` | `ipv6` | `dual_stack`.
#node_group_configuration ⇒ Array<Types::NodeGroupConfiguration>

A list of node group (shard) configuration options.
#notification_topic_arn ⇒ String

The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent.
#num_cache_clusters ⇒ Integer

The number of clusters this replication group initially has.
#num_node_groups ⇒ Integer

An optional parameter that specifies the number of node groups (shards) for this Valkey or Redis OSS (cluster mode enabled) replication group.
#port ⇒ Integer

The port number on which each member of the replication group accepts connections.
#preferred_cache_cluster_a_zs ⇒ Array<String>

A list of EC2 Availability Zones in which the replication group’s clusters are created.
#preferred_maintenance_window ⇒ String

Specifies the weekly time range during which maintenance on the cluster is performed.
#primary_cluster_id ⇒ String

The identifier of the cluster that serves as the primary for this replication group.
#replicas_per_node_group ⇒ Integer

An optional parameter that specifies the number of replica nodes in each node group (shard).
#replication_group_description ⇒ String

A user-created description for the replication group.
#replication_group_id ⇒ String

The replication group identifier.
#security_group_ids ⇒ Array<String>

One or more Amazon VPC security groups associated with this replication group.
#serverless_cache_snapshot_name ⇒ String

The name of the snapshot used to create a replication group.
#snapshot_arns ⇒ Array<String>

A list of Amazon Resource Names (ARN) that uniquely identify the Valkey or Redis OSS RDB snapshot files stored in Amazon S3.
#snapshot_name ⇒ String

The name of a snapshot from which to restore data into the new replication group.
#snapshot_retention_limit ⇒ Integer

The number of days for which ElastiCache retains automatic snapshots before deleting them.
#snapshot_window ⇒ String

The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard).
#tags ⇒ Array<Types::Tag>

A list of tags to be added to this resource.
#transit_encryption_enabled ⇒ Boolean

A flag that enables in-transit encryption when set to ‘true`.
#transit_encryption_mode ⇒ String

A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.
#user_group_ids ⇒ Array<String>

The user group to associate with the replication group.

Instance Attribute Details

#at_rest_encryption_enabled ⇒ `Boolean`

A flag that enables encryption at rest when set to ‘true`.

You cannot modify the value of ‘AtRestEncryptionEnabled` after the replication group is created. To enable encryption at rest on a replication group you must set `AtRestEncryptionEnabled` to `true` when you create the replication group.

Required: Only available when creating a replication group in an Amazon VPC using Redis OSS version ‘3.2.6`, `4.x` or later.

Default: ‘false`

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#auth_token ⇒ `String`

**Reserved parameter.** The password used to access a password protected server.

‘AuthToken` can be specified only on replication groups where `TransitEncryptionEnabled` is `true`.

For HIPAA compliance, you must specify ‘TransitEncryptionEnabled` as `true`, an `AuthToken`, and a `CacheSubnetGroup`.

Password constraints:

Must be only printable ASCII characters.
Must be at least 16 characters and no more than 128 characters in length.
The only permitted printable special characters are !, &, #, $, ^, <, >, and -. Other printable special characters cannot be used in the AUTH token.

For more information, see [AUTH password] at redis.io/commands/AUTH.

[1]: redis.io/commands/AUTH

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#auto_minor_version_upgrade ⇒ `Boolean`

If you are running Valkey 7.2 and above or Redis OSS engine version 6.0 and above, set this parameter to yes to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions.

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#automatic_failover_enabled ⇒ `Boolean`

Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.

‘AutomaticFailoverEnabled` must be enabled for Valkey or Redis OSS (cluster mode enabled) replication groups.

Default: false

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#cache_node_type ⇒ `String`

The compute and memory capacity of the nodes in the node group (shard).

The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

General purpose:
- Current generation:
  
  **M7g node types**: ‘cache.m7g.large`, `cache.m7g.xlarge`, `cache.m7g.2xlarge`, `cache.m7g.4xlarge`, `cache.m7g.8xlarge`, `cache.m7g.12xlarge`, `cache.m7g.16xlarge`
  
  <note markdown=“1”> For region availability, see [Supported Node Types]
```
</note>
```
  **M6g node types** (available only for Redis OSS engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): ‘cache.m6g.large`, `cache.m6g.xlarge`, `cache.m6g.2xlarge`, `cache.m6g.4xlarge`, `cache.m6g.8xlarge`, `cache.m6g.12xlarge`, `cache.m6g.16xlarge`
  
  **M5 node types:** ‘cache.m5.large`, `cache.m5.xlarge`, `cache.m5.2xlarge`, `cache.m5.4xlarge`, `cache.m5.12xlarge`, `cache.m5.24xlarge`
  
  **M4 node types:** ‘cache.m4.large`, `cache.m4.xlarge`, `cache.m4.2xlarge`, `cache.m4.4xlarge`, `cache.m4.10xlarge`
  
  **T4g node types** (available only for Redis OSS engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): ‘cache.t4g.micro`, `cache.t4g.small`, `cache.t4g.medium`
  
  **T3 node types:** ‘cache.t3.micro`, `cache.t3.small`, `cache.t3.medium`
  
  **T2 node types:** ‘cache.t2.micro`, `cache.t2.small`, `cache.t2.medium`
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  **T1 node types:** ‘cache.t1.micro`
  
  **M1 node types:** ‘cache.m1.small`, `cache.m1.medium`, `cache.m1.large`, `cache.m1.xlarge`
  
  **M3 node types:** ‘cache.m3.medium`, `cache.m3.large`, `cache.m3.xlarge`, `cache.m3.2xlarge`
Compute optimized:
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  **C1 node types:** ‘cache.c1.xlarge`
Memory optimized:
- Current generation:
  
  **R7g node types**: ‘cache.r7g.large`, `cache.r7g.xlarge`, `cache.r7g.2xlarge`, `cache.r7g.4xlarge`, `cache.r7g.8xlarge`, `cache.r7g.12xlarge`, `cache.r7g.16xlarge`
  
  <note markdown=“1”> For region availability, see [Supported Node Types]
```
</note>
```
  **R6g node types** (available only for Redis OSS engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): ‘cache.r6g.large`, `cache.r6g.xlarge`, `cache.r6g.2xlarge`, `cache.r6g.4xlarge`, `cache.r6g.8xlarge`, `cache.r6g.12xlarge`, `cache.r6g.16xlarge`
  
  **R5 node types:** ‘cache.r5.large`, `cache.r5.xlarge`, `cache.r5.2xlarge`, `cache.r5.4xlarge`, `cache.r5.12xlarge`, `cache.r5.24xlarge`
  
  **R4 node types:** ‘cache.r4.large`, `cache.r4.xlarge`, `cache.r4.2xlarge`, `cache.r4.4xlarge`, `cache.r4.8xlarge`, `cache.r4.16xlarge`
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  **M2 node types:** ‘cache.m2.xlarge`, `cache.m2.2xlarge`, `cache.m2.4xlarge`
  
  **R3 node types:** ‘cache.r3.large`, `cache.r3.xlarge`, `cache.r3.2xlarge`, `cache.r3.4xlarge`, `cache.r3.8xlarge`

**Additional node type info**

All current generation instance types are created in Amazon VPC by default.
Valkey or Redis OSS append-only files (AOF) are not supported for T1 or T2 instances.
Valkey or Redis OSS Multi-AZ with automatic failover is not supported on T1 instances.
The configuration variables ‘appendonly` and `appendfsync` are not supported on Valkey, or on Redis OSS version 2.8.22 and later.

[1]: docs.aws.amazon.com/AmazonElastiCache/latest/dg/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#cache_parameter_group_name ⇒ `String`

The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used.

If you are running Valkey or Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name.

To create a Valkey or Redis OSS (cluster mode disabled) replication group, use ‘CacheParameterGroupName=default.redis3.2`.
To create a Valkey or Redis OSS (cluster mode enabled) replication group, use ‘CacheParameterGroupName=default.redis3.2.cluster.on`.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#cache_security_group_names ⇒ `Array<String>`

A list of cache security group names to associate with this replication group.

Returns:

(Array<String>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#cache_subnet_group_name ⇒ `String`

The name of the cache subnet group to be used for the replication group.

If you’re going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see [Subnets and Subnet Groups].

[1]: docs.aws.amazon.com/AmazonElastiCache/latest/dg/SubnetGroups.html

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#cluster_mode ⇒ `String`

Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Valkey or Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Valkey or Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#data_tiering_enabled ⇒ `Boolean`

Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see [Data tiering].

[1]: docs.aws.amazon.com/AmazonElastiCache/latest/dg/data-tiering.html

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#engine ⇒ `String`

The name of the cache engine to be used for the clusters in this replication group. The value must be set to ‘Redis`.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#engine_version ⇒ `String`

The version number of the cache engine to be used for the clusters in this replication group. To view the supported cache engine versions, use the ‘DescribeCacheEngineVersions` operation.

Important: You can upgrade to a newer engine version (see [Selecting a Cache Engine and Version]) in the *ElastiCache User Guide*, but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.

[1]: docs.aws.amazon.com/AmazonElastiCache/latest/dg/SelectEngine.html#VersionManagement

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#global_replication_group_id ⇒ `String`

The name of the Global datastore

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#ip_discovery ⇒ `String`

The network type you choose when creating a replication group, either ‘ipv4` | `ipv6`. IPv6 is supported for workloads using Valkey 7.2 and above, Redis OSS engine version 6.2 and above or Memcached engine version 1.6.6 and above on all instances built on the [Nitro system].

[1]: aws.amazon.com/ec2/nitro/

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#kms_key_id ⇒ `String`

The ID of the KMS key used to encrypt the disk in the cluster.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#log_delivery_configurations ⇒ `Array<Types::LogDeliveryConfigurationRequest>`

Specifies the destination, format and type of the logs.

Returns:

(Array<Types::LogDeliveryConfigurationRequest>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#multi_az_enabled ⇒ `Boolean`

A flag indicating if you have Multi-AZ enabled to enhance fault tolerance. For more information, see [Minimizing Downtime: Multi-AZ].

[1]: docs.aws.amazon.com/AmazonElastiCache/latest/dg/AutoFailover.html

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#network_type ⇒ `String`

Must be either ‘ipv4` | `ipv6` | `dual_stack`. IPv6 is supported for workloads using Valkey 7.2 and above, Redis OSS engine version 6.2 and above or Memcached engine version 1.6.6 and above on all instances built on the [Nitro system].

[1]: aws.amazon.com/ec2/nitro/

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#node_group_configuration ⇒ `Array<Types::NodeGroupConfiguration>`

A list of node group (shard) configuration options. Each node group (shard) configuration has the following members: ‘PrimaryAvailabilityZone`, `ReplicaAvailabilityZones`, `ReplicaCount`, and `Slots`.

If you’re creating a Valkey or Redis OSS (cluster mode disabled) or a Valkey or Redis OSS (cluster mode enabled) replication group, you can use this parameter to individually configure each node group (shard), or you can omit this parameter. However, it is required when seeding a Valkey or Redis OSS (cluster mode enabled) cluster from a S3 rdb file. You must configure each node group (shard) using this parameter because you must specify the slots for each node group.

Returns:

(Array<Types::NodeGroupConfiguration>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#notification_topic_arn ⇒ `String`

The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent.

<note markdown=“1”> The Amazon SNS topic owner must be the same as the cluster owner.

</note>

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#num_cache_clusters ⇒ `Integer`

The number of clusters this replication group initially has.

This parameter is not used if there is more than one node group (shard). You should use ‘ReplicasPerNodeGroup` instead.

If ‘AutomaticFailoverEnabled` is `true`, the value of this parameter must be at least 2. If `AutomaticFailoverEnabled` is `false` you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6.

The maximum permitted value for ‘NumCacheClusters` is 6 (1 primary plus 5 replicas).

Returns:

(Integer)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#num_node_groups ⇒ `Integer`

An optional parameter that specifies the number of node groups (shards) for this Valkey or Redis OSS (cluster mode enabled) replication group. For Valkey or Redis OSS (cluster mode disabled) either omit this parameter or set it to 1.

Default: 1

Returns:

(Integer)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#port ⇒ `Integer`

The port number on which each member of the replication group accepts connections.

Returns:

(Integer)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#preferred_cache_cluster_a_zs ⇒ `Array<String>`

A list of EC2 Availability Zones in which the replication group’s clusters are created. The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list.

This parameter is not used if there is more than one node group (shard). You should use ‘NodeGroupConfiguration` instead.

<note markdown=“1”> If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group.

The number of Availability Zones listed must equal the value of

‘NumCacheClusters`.

</note>

Default: system chosen Availability Zones.

Returns:

(Array<String>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#preferred_maintenance_window ⇒ `String`

Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.

Valid values for ‘ddd` are:

‘sun`
‘mon`
‘tue`
‘wed`
‘thu`
‘fri`
‘sat`

Example: ‘sun:23:00-mon:01:30`

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#primary_cluster_id ⇒ `String`

The identifier of the cluster that serves as the primary for this replication group. This cluster must already exist and have a status of ‘available`.

This parameter is not required if ‘NumCacheClusters`, `NumNodeGroups`, or `ReplicasPerNodeGroup` is specified.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#replicas_per_node_group ⇒ `Integer`

An optional parameter that specifies the number of replica nodes in each node group (shard). Valid values are 0 to 5.

Returns:

(Integer)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#replication_group_description ⇒ `String`

A user-created description for the replication group.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#replication_group_id ⇒ `String`

The replication group identifier. This parameter is stored as a lowercase string.

Constraints:

A name must contain from 1 to 40 alphanumeric characters or hyphens.
The first character must be a letter.
A name cannot end with a hyphen or contain two consecutive hyphens.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#security_group_ids ⇒ `Array<String>`

One or more Amazon VPC security groups associated with this replication group.

Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).

Returns:

(Array<String>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#serverless_cache_snapshot_name ⇒ `String`

The name of the snapshot used to create a replication group. Available for Valkey, Redis OSS only.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#snapshot_arns ⇒ `Array<String>`

A list of Amazon Resource Names (ARN) that uniquely identify the Valkey or Redis OSS RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter NumNodeGroups or the number of node groups configured by NodeGroupConfiguration regardless of the number of ARNs specified here.

Example of an Amazon S3 ARN: ‘arn:aws:s3:::my_bucket/snapshot1.rdb`

Returns:

(Array<String>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#snapshot_name ⇒ `String`

The name of a snapshot from which to restore data into the new replication group. The snapshot status changes to ‘restoring` while the new replication group is being created.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#snapshot_retention_limit ⇒ `Integer`

The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set ‘SnapshotRetentionLimit` to 5, a snapshot that was taken today is retained for 5 days before being deleted.

Default: 0 (i.e., automatic backups are disabled for this cluster).

Returns:

(Integer)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#snapshot_window ⇒ `String`

The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard).

Example: ‘05:00-09:00`

If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#tags ⇒ `Array<Types::Tag>`

A list of tags to be added to this resource. Tags are comma-separated key,value pairs (e.g. Key=‘myKey`, Value=`myKeyValue`. You can include multiple tags as shown following: Key=`myKey`, Value=`myKeyValue` Key=`mySecondKey`, Value=`mySecondKeyValue`. Tags on replication groups will be replicated to all nodes.

Returns:

(Array<Types::Tag>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#transit_encryption_enabled ⇒ `Boolean`

A flag that enables in-transit encryption when set to ‘true`.

This parameter is valid only if the ‘Engine` parameter is `redis`, the `EngineVersion` parameter is `3.2.6`, `4.x` or later, and the cluster is being created in an Amazon VPC.

If you enable in-transit encryption, you must also specify a value for ‘CacheSubnetGroup`.

Required: Only available when creating a replication group in an Amazon VPC using Redis OSS version ‘3.2.6`, `4.x` or later.

Default: ‘false`

For HIPAA compliance, you must specify ‘TransitEncryptionEnabled` as `true`, an `AuthToken`, and a `CacheSubnetGroup`.

Returns:

(Boolean)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#transit_encryption_mode ⇒ `String`

A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.

When setting ‘TransitEncryptionEnabled` to `true`, you can set your `TransitEncryptionMode` to `preferred` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Valkey or Redis OSS clients to use encrypted connections you can modify the value to `required` to allow encrypted connections only.

Setting ‘TransitEncryptionMode` to `required` is a two-step process that requires you to first set the `TransitEncryptionMode` to `preferred`, after that you can set `TransitEncryptionMode` to `required`.

This process will not trigger the replacement of the replication group.

Returns:

(String)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

#user_group_ids ⇒ `Array<String>`

The user group to associate with the replication group.

Returns:

(Array<String>)

# File 'lib/aws-sdk-elasticache/types.rb', line 2823

class CreateReplicationGroupMessage < Struct.new(
  :replication_group_id,
  :replication_group_description,
  :global_replication_group_id,
  :primary_cluster_id,
  :automatic_failover_enabled,
  :multi_az_enabled,
  :num_cache_clusters,
  :preferred_cache_cluster_a_zs,
  :num_node_groups,
  :replicas_per_node_group,
  :node_group_configuration,
  :cache_node_type,
  :engine,
  :engine_version,
  :cache_parameter_group_name,
  :cache_subnet_group_name,
  :cache_security_group_names,
  :security_group_ids,
  :tags,
  :snapshot_arns,
  :snapshot_name,
  :preferred_maintenance_window,
  :port,
  :notification_topic_arn,
  :auto_minor_version_upgrade,
  :snapshot_retention_limit,
  :snapshot_window,
  :auth_token,
  :transit_encryption_enabled,
  :at_rest_encryption_enabled,
  :kms_key_id,
  :user_group_ids,
  :log_delivery_configurations,
  :data_tiering_enabled,
  :network_type,
  :ip_discovery,
  :transit_encryption_mode,
  :cluster_mode,
  :serverless_cache_snapshot_name)
  SENSITIVE = []
  include Aws::Structure
end

Class: Aws::ElastiCache::Types::CreateReplicationGroupMessage

Overview

Constant Summary collapse

Instance Attribute Summary collapse

Instance Attribute Details

#at_rest_encryption_enabled ⇒ Boolean

#auth_token ⇒ String

#auto_minor_version_upgrade ⇒ Boolean

#automatic_failover_enabled ⇒ Boolean

#cache_node_type ⇒ String

#cache_parameter_group_name ⇒ String

#cache_security_group_names ⇒ Array<String>

#cache_subnet_group_name ⇒ String

#cluster_mode ⇒ String

#data_tiering_enabled ⇒ Boolean

#engine ⇒ String

#engine_version ⇒ String

#global_replication_group_id ⇒ String

#ip_discovery ⇒ String

#kms_key_id ⇒ String

#log_delivery_configurations ⇒ Array<Types::LogDeliveryConfigurationRequest>

#multi_az_enabled ⇒ Boolean

#network_type ⇒ String

#node_group_configuration ⇒ Array<Types::NodeGroupConfiguration>

#notification_topic_arn ⇒ String

#num_cache_clusters ⇒ Integer

#num_node_groups ⇒ Integer

#port ⇒ Integer

#preferred_cache_cluster_a_zs ⇒ Array<String>

#preferred_maintenance_window ⇒ String

#primary_cluster_id ⇒ String

#replicas_per_node_group ⇒ Integer

#replication_group_description ⇒ String

#replication_group_id ⇒ String

#security_group_ids ⇒ Array<String>

#serverless_cache_snapshot_name ⇒ String

#snapshot_arns ⇒ Array<String>

#snapshot_name ⇒ String

#snapshot_retention_limit ⇒ Integer

#snapshot_window ⇒ String

#tags ⇒ Array<Types::Tag>

#transit_encryption_enabled ⇒ Boolean

#transit_encryption_mode ⇒ String

#user_group_ids ⇒ Array<String>

#at_rest_encryption_enabled ⇒ `Boolean`

#auth_token ⇒ `String`

#auto_minor_version_upgrade ⇒ `Boolean`

#automatic_failover_enabled ⇒ `Boolean`

#cache_node_type ⇒ `String`

#cache_parameter_group_name ⇒ `String`

#cache_security_group_names ⇒ `Array<String>`

#cache_subnet_group_name ⇒ `String`

#cluster_mode ⇒ `String`

#data_tiering_enabled ⇒ `Boolean`

#engine ⇒ `String`

#engine_version ⇒ `String`

#global_replication_group_id ⇒ `String`

#ip_discovery ⇒ `String`

#kms_key_id ⇒ `String`

#log_delivery_configurations ⇒ `Array<Types::LogDeliveryConfigurationRequest>`

#multi_az_enabled ⇒ `Boolean`

#network_type ⇒ `String`

#node_group_configuration ⇒ `Array<Types::NodeGroupConfiguration>`

#notification_topic_arn ⇒ `String`

#num_cache_clusters ⇒ `Integer`

#num_node_groups ⇒ `Integer`

#port ⇒ `Integer`

#preferred_cache_cluster_a_zs ⇒ `Array<String>`

#preferred_maintenance_window ⇒ `String`

#primary_cluster_id ⇒ `String`

#replicas_per_node_group ⇒ `Integer`

#replication_group_description ⇒ `String`

#replication_group_id ⇒ `String`

#security_group_ids ⇒ `Array<String>`

#serverless_cache_snapshot_name ⇒ `String`

#snapshot_arns ⇒ `Array<String>`

#snapshot_name ⇒ `String`

#snapshot_retention_limit ⇒ `Integer`

#snapshot_window ⇒ `String`

#tags ⇒ `Array<Types::Tag>`

#transit_encryption_enabled ⇒ `Boolean`

#transit_encryption_mode ⇒ `String`

#user_group_ids ⇒ `Array<String>`