Class: Aws::DirectConnect::Client

Inherits:
Seahorse::Client::Base
  • Object
show all
Includes:
ClientStubs
Defined in:
lib/aws-sdk-directconnect/client.rb

Overview

An API client for DirectConnect. To construct a client, you need to configure a ‘:region` and `:credentials`.

client = Aws::DirectConnect::Client.new(
  region: region_name,
  credentials: credentials,
  # ...
)

For details on configuring region and credentials see the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).

See #initialize for a full list of supported configuration options.

Class Attribute Summary collapse

API Operations collapse

Class Method Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(options) ⇒ Client

Returns a new instance of Client.

Parameters:

  • options (Hash)

Options Hash (options):

  • :plugins (Array<Seahorse::Client::Plugin>) — default: []] —

    A list of plugins to apply to the client. Each plugin is either a class name or an instance of a plugin class.

  • :credentials (required, Aws::CredentialProvider) —

    Your AWS credentials. This can be an instance of any one of the following classes:

    • ‘Aws::Credentials` - Used for configuring static, non-refreshing credentials.

    • ‘Aws::SharedCredentials` - Used for loading static credentials from a shared file, such as `~/.aws/config`.

    • ‘Aws::AssumeRoleCredentials` - Used when you need to assume a role.

    • ‘Aws::AssumeRoleWebIdentityCredentials` - Used when you need to assume a role after providing credentials via the web.

    • ‘Aws::SSOCredentials` - Used for loading credentials from AWS SSO using an access token generated from `aws login`.

    • ‘Aws::ProcessCredentials` - Used for loading credentials from a process that outputs to stdout.

    • ‘Aws::InstanceProfileCredentials` - Used for loading credentials from an EC2 IMDS on an EC2 instance.

    • ‘Aws::ECSCredentials` - Used for loading credentials from instances running in ECS.

    • ‘Aws::CognitoIdentityCredentials` - Used for loading credentials from the Cognito Identity service.

    When ‘:credentials` are not configured directly, the following locations will be searched for credentials:

    • ‘Aws.config`

    • The ‘:access_key_id`, `:secret_access_key`, `:session_token`, and `:account_id` options.

    • ENV, ENV, ENV, and ENV

    • ‘~/.aws/credentials`

    • ‘~/.aws/config`

    • EC2/ECS IMDS instance profile - When used by default, the timeouts are very aggressive. Construct and pass an instance of ‘Aws::InstanceProfileCredentials` or `Aws::ECSCredentials` to enable retries and extended timeouts. Instance profile credential fetching can be disabled by setting ENV to true.

  • :region (required, String) —

    The AWS region to connect to. The configured ‘:region` is used to determine the service `:endpoint`. When not passed, a default `:region` is searched for in the following locations:

  • :access_key_id (String)
  • :account_id (String)
  • :active_endpoint_cache (Boolean) — default: false —

    When set to ‘true`, a thread polling for endpoints will be running in the background every 60 secs (default). Defaults to `false`.

  • :adaptive_retry_wait_to_fill (Boolean) — default: true —

    Used only in ‘adaptive` retry mode. When true, the request will sleep until there is sufficent client side capacity to retry the request. When false, the request will raise a `RetryCapacityNotAvailableError` and will not retry instead of sleeping.

  • :client_side_monitoring (Boolean) — default: false —

    When ‘true`, client-side metrics will be collected for all API requests from this client.

  • :client_side_monitoring_client_id (String) — default: "" —

    Allows you to provide an identifier for this client which will be attached to all generated client side metrics. Defaults to an empty string.

  • :client_side_monitoring_host (String) — default: "127.0.0.1" —

    Allows you to specify the DNS hostname or IPv4 or IPv6 address that the client side monitoring agent is running on, where client metrics will be published via UDP.

  • :client_side_monitoring_port (Integer) — default: 31000 —

    Required for publishing client metrics. The port that the client side monitoring agent is running on, where client metrics will be published via UDP.

  • :client_side_monitoring_publisher (Aws::ClientSideMonitoring::Publisher) — default: Aws::ClientSideMonitoring::Publisher —

    Allows you to provide a custom client-side monitoring publisher class. By default, will use the Client Side Monitoring Agent Publisher.

  • :convert_params (Boolean) — default: true —

    When ‘true`, an attempt is made to coerce request parameters into the required types.

  • :correct_clock_skew (Boolean) — default: true —

    Used only in ‘standard` and adaptive retry modes. Specifies whether to apply a clock skew correction and retry requests with skewed client clocks.

  • :defaults_mode (String) — default: "legacy" —

    See Aws::DefaultsModeConfiguration for a list of the accepted modes and the configuration defaults that are included.

  • :disable_host_prefix_injection (Boolean) — default: false —

    Set to true to disable SDK automatically adding host prefix to default service endpoint when available.

  • :disable_request_compression (Boolean) — default: false —

    When set to ‘true’ the request body will not be compressed for supported operations.

  • :endpoint (String, URI::HTTPS, URI::HTTP) —

    Normally you should not configure the ‘:endpoint` option directly. This is normally constructed from the `:region` option. Configuring `:endpoint` is normally reserved for connecting to test or custom endpoints. The endpoint should be a URI formatted like:

    'http://example.com'
'https://example.com'
'http://example.com:123'
  • :endpoint_cache_max_entries (Integer) — default: 1000 —

    Used for the maximum size limit of the LRU cache storing endpoints data for endpoint discovery enabled operations. Defaults to 1000.

  • :endpoint_cache_max_threads (Integer) — default: 10 —

    Used for the maximum threads in use for polling endpoints to be cached, defaults to 10.

  • :endpoint_cache_poll_interval (Integer) — default: 60 —

    When :endpoint_discovery and :active_endpoint_cache is enabled, Use this option to config the time interval in seconds for making requests fetching endpoints information. Defaults to 60 sec.

  • :endpoint_discovery (Boolean) — default: false —

    When set to ‘true`, endpoint discovery will be enabled for operations when available.

  • :ignore_configured_endpoint_urls (Boolean) —

    Setting to true disables use of endpoint URLs provided via environment variables and the shared configuration file.

  • :log_formatter (Aws::Log::Formatter) — default: Aws::Log::Formatter.default —

    The log formatter.

  • :log_level (Symbol) — default: :info —

    The log level to send messages to the ‘:logger` at.

  • :logger (Logger) —

    The Logger instance to send log messages to. If this option is not set, logging will be disabled.

  • :max_attempts (Integer) — default: 3 —

    An integer representing the maximum number attempts that will be made for a single request, including the initial attempt. For example, setting this value to 5 will result in a request being retried up to 4 times. Used in ‘standard` and `adaptive` retry modes.

  • :profile (String) — default: "default" —

    Used when loading credentials from the shared credentials file at HOME/.aws/credentials. When not specified, ‘default’ is used.

  • :request_min_compression_size_bytes (Integer) — default: 10240 —

    The minimum size in bytes that triggers compression for request bodies. The value must be non-negative integer value between 0 and 10485780 bytes inclusive.

  • :retry_backoff (Proc) —

    A proc or lambda used for backoff. Defaults to 2**retries * retry_base_delay. This option is only used in the ‘legacy` retry mode.

  • :retry_base_delay (Float) — default: 0.3 —

    The base delay in seconds used by the default backoff function. This option is only used in the ‘legacy` retry mode.

  • :retry_jitter (Symbol) — default: :none —

    A delay randomiser function used by the default backoff function. Some predefined functions can be referenced by name - :none, :equal, :full, otherwise a Proc that takes and returns a number. This option is only used in the ‘legacy` retry mode.

    @see www.awsarchitectureblog.com/2015/03/backoff.html

  • :retry_limit (Integer) — default: 3 —

    The maximum number of times to retry failed requests. Only ~ 500 level server errors and certain ~ 400 level client errors are retried. Generally, these are throttling errors, data checksum errors, networking errors, timeout errors, auth errors, endpoint discovery, and errors from expired credentials. This option is only used in the ‘legacy` retry mode.

  • :retry_max_delay (Integer) — default: 0 —

    The maximum number of seconds to delay between retries (0 for no limit) used by the default backoff function. This option is only used in the ‘legacy` retry mode.

  • :retry_mode (String) — default: "legacy" —

    Specifies which retry algorithm to use. Values are:

    • ‘legacy` - The pre-existing retry behavior. This is default value if no retry mode is provided.

    • ‘standard` - A standardized set of retry rules across the AWS SDKs. This includes support for retry quotas, which limit the number of unsuccessful retries a client can make.

    • ‘adaptive` - An experimental retry mode that includes all the functionality of `standard` mode along with automatic client side throttling. This is a provisional mode that may change behavior in the future.

  • :sdk_ua_app_id (String) —

    A unique and opaque application ID that is appended to the User-Agent header as app/sdk_ua_app_id. It should have a maximum length of 50. This variable is sourced from environment variable AWS_SDK_UA_APP_ID or the shared config profile attribute sdk_ua_app_id.

  • :secret_access_key (String)
  • :session_token (String)
  • :sigv4a_signing_region_set (Array) —

    A list of regions that should be signed with SigV4a signing. When not passed, a default ‘:sigv4a_signing_region_set` is searched for in the following locations:

  • :simple_json (Boolean) — default: false —

    Disables request parameter conversion, validation, and formatting. Also disables response data type conversions. The request parameters hash must be formatted exactly as the API expects.This option is useful when you want to ensure the highest level of performance by avoiding overhead of walking request parameters and response data structures.

  • :stub_responses (Boolean) — default: false —

    Causes the client to return stubbed responses. By default fake responses are generated and returned. You can specify the response data to return or errors to raise by calling ClientStubs#stub_responses. See ClientStubs for more information.

    ** Please note ** When response stubbing is enabled, no HTTP requests are made, and retries are disabled.

  • :telemetry_provider (Aws::Telemetry::TelemetryProviderBase) — default: Aws::Telemetry::NoOpTelemetryProvider —

    Allows you to provide a telemetry provider, which is used to emit telemetry data. By default, uses ‘NoOpTelemetryProvider` which will not record or emit any telemetry data. The SDK supports the following telemetry providers:

    • OpenTelemetry (OTel) - To use the OTel provider, install and require the

    ‘opentelemetry-sdk` gem and then, pass in an instance of a `Aws::Telemetry::OTelProvider` for telemetry provider.

  • :token_provider (Aws::TokenProvider) —

    A Bearer Token Provider. This can be an instance of any one of the following classes:

    • ‘Aws::StaticTokenProvider` - Used for configuring static, non-refreshing tokens.

    • ‘Aws::SSOTokenProvider` - Used for loading tokens from AWS SSO using an access token generated from `aws login`.

    When ‘:token_provider` is not configured directly, the `Aws::TokenProviderChain` will be used to search for tokens configured for your profile in shared configuration files.

  • :use_dualstack_endpoint (Boolean) —

    When set to ‘true`, dualstack enabled endpoints (with `.aws` TLD) will be used if available.

  • :use_fips_endpoint (Boolean) —

    When set to ‘true`, fips compatible endpoints will be used if available. When a `fips` region is used, the region is normalized and this config is set to `true`.

  • :validate_params (Boolean) — default: true —

    When ‘true`, request parameters are validated before sending the request.

  • :endpoint_provider (Aws::DirectConnect::EndpointProvider) —

    The endpoint provider used to resolve endpoints. Any object that responds to ‘#resolve_endpoint(parameters)` where `parameters` is a Struct similar to `Aws::DirectConnect::EndpointParameters`.

  • :http_continue_timeout (Float) — default: 1 —

    The number of seconds to wait for a 100-continue response before sending the request body. This option has no effect unless the request has “Expect” header set to “100-continue”. Defaults to ‘nil` which disables this behaviour. This value can safely be set per request on the session.

  • :http_idle_timeout (Float) — default: 5 —

    The number of seconds a connection is allowed to sit idle before it is considered stale. Stale connections are closed and removed from the pool before making a request.

  • :http_open_timeout (Float) — default: 15 —

    The default number of seconds to wait for response data. This value can safely be set per-request on the session.

  • :http_proxy (URI::HTTP, String) —

    A proxy to send requests through. Formatted like ‘proxy.com:123’.

  • :http_read_timeout (Float) — default: 60 —

    The default number of seconds to wait for response data. This value can safely be set per-request on the session.

  • :http_wire_trace (Boolean) — default: false —

    When ‘true`, HTTP debug output will be sent to the `:logger`.

  • :on_chunk_received (Proc) —

    When a Proc object is provided, it will be used as callback when each chunk of the response body is received. It provides three arguments: the chunk, the number of bytes received, and the total number of bytes in the response (or nil if the server did not send a ‘content-length`).

  • :on_chunk_sent (Proc) —

    When a Proc object is provided, it will be used as callback when each chunk of the request body is sent. It provides three arguments: the chunk, the number of bytes read from the body, and the total number of bytes in the body.

  • :raise_response_errors (Boolean) — default: true —

    When ‘true`, response errors are raised.

  • :ssl_ca_bundle (String) —

    Full path to the SSL certificate authority bundle file that should be used when verifying peer certificates. If you do not pass ‘:ssl_ca_bundle` or `:ssl_ca_directory` the the system default will be used if available.

  • :ssl_ca_directory (String) —

    Full path of the directory that contains the unbundled SSL certificate authority files for verifying peer certificates. If you do not pass ‘:ssl_ca_bundle` or `:ssl_ca_directory` the the system default will be used if available.

  • :ssl_ca_store (String) —

    Sets the X509::Store to verify peer certificate.

  • :ssl_cert (OpenSSL::X509::Certificate) —

    Sets a client certificate when creating http connections.

  • :ssl_key (OpenSSL::PKey) —

    Sets a client key when creating http connections.

  • :ssl_timeout (Float) —

    Sets the SSL timeout in seconds

  • :ssl_verify_peer (Boolean) — default: true —

    When ‘true`, SSL peer certificates are verified when establishing a connection.



451
452
453
 
# File 'lib/aws-sdk-directconnect/client.rb', line 451

def initialize(*args)
  super
end

Class Attribute Details

.identifier ⇒ Object (readonly)

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future. 



5025
5026
5027
 
# File 'lib/aws-sdk-directconnect/client.rb', line 5025

def identifier
  @identifier
end

Class Method Details

.errors_module ⇒ Object

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future. 



5028
5029
5030
 
# File 'lib/aws-sdk-directconnect/client.rb', line 5028

def errors_module
  Errors
end

Instance Method Details

#accept_direct_connect_gateway_association_proposal(params = {}) ⇒ Types::AcceptDirectConnectGatewayAssociationProposalResult

Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.

Examples:

Request syntax with placeholder values


resp = client.accept_direct_connect_gateway_association_proposal({
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
  proposal_id: "DirectConnectGatewayAssociationProposalId", # required
  associated_gateway_owner_account: "OwnerAccount", # required
  override_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
})

Response structure


resp.direct_connect_gateway_association.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association. #=> String
resp.direct_connect_gateway_association.association_state #=> String, one of "associating", "associated", "disassociating", "disassociated", "updating"
resp.direct_connect_gateway_association.state_change_error #=> String
resp.direct_connect_gateway_association.associated_gateway.id #=> String
resp.direct_connect_gateway_association.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association.associated_gateway. #=> String
resp.direct_connect_gateway_association.associated_gateway.region #=> String
resp.direct_connect_gateway_association.association_id #=> String
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association.virtual_gateway_id #=> String
resp.direct_connect_gateway_association.virtual_gateway_region #=> String
resp.direct_connect_gateway_association. #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway.

  • :proposal_id (required, String) —

    The ID of the request proposal.

  • :associated_gateway_owner_account (required, String) —

    The ID of the Amazon Web Services account that owns the virtual private gateway or transit gateway.

  • :override_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    Overrides the Amazon VPC prefixes advertised to the Direct Connect gateway.

    For information about how to set the prefixes, see [Allowed Prefixes] in the *Direct Connect User Guide*.

    [1]: docs.aws.amazon.com/directconnect/latest/UserGuide/multi-account-associate-vgw.html#allowed-prefixes

Returns:

See Also:



519
520
521
522
 
# File 'lib/aws-sdk-directconnect/client.rb', line 519

def accept_direct_connect_gateway_association_proposal(params = {}, options = {})
  req = build_request(:accept_direct_connect_gateway_association_proposal, params)
  req.send_request(options)
end

#allocate_connection_on_interconnect(params = {}) ⇒ Types::Connection

<note markdown=“1”> Deprecated. Use AllocateHostedConnection instead.

</note>

Creates a hosted connection on an interconnect.

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the specified interconnect.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.allocate_connection_on_interconnect({
  bandwidth: "Bandwidth", # required
  connection_name: "ConnectionName", # required
  owner_account: "OwnerAccount", # required
  interconnect_id: "InterconnectId", # required
  vlan: 1, # required
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :bandwidth (required, String) —

    The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.

  • :connection_name (required, String) —

    The name of the provisioned connection.

  • :owner_account (required, String) —

    The ID of the Amazon Web Services account of the customer for whom the connection will be provisioned.

  • :interconnect_id (required, String) —

    The ID of the interconnect on which the connection will be provisioned.

  • :vlan (required, Integer) —

    The dedicated VLAN provisioned to the connection.

Returns:

See Also:



628
629
630
631
 
# File 'lib/aws-sdk-directconnect/client.rb', line 628

def allocate_connection_on_interconnect(params = {}, options = {})
  req = build_request(:allocate_connection_on_interconnect, params)
  req.send_request(options)
end

#allocate_hosted_connection(params = {}) ⇒ Types::Connection

Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.

Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.allocate_hosted_connection({
  connection_id: "ConnectionId", # required
  owner_account: "OwnerAccount", # required
  bandwidth: "Bandwidth", # required
  connection_name: "ConnectionName", # required
  vlan: 1, # required
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the interconnect or LAG.

  • :owner_account (required, String) —

    The ID of the Amazon Web Services account ID of the customer for the connection.

  • :bandwidth (required, String) —

    The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, 10Gbps, and 25Gbps. Note that only those Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps, 10Gbps, or 25Gbps hosted connection.

  • :connection_name (required, String) —

    The name of the hosted connection.

  • :vlan (required, Integer) —

    The dedicated VLAN provisioned to the hosted connection.

  • :tags (Array<Types::Tag>) —

    The tags associated with the connection.

Returns:

See Also:



745
746
747
748
 
# File 'lib/aws-sdk-directconnect/client.rb', line 745

def allocate_hosted_connection(params = {}, options = {})
  req = build_request(:allocate_hosted_connection, params)
  req.send_request(options)
end

#allocate_private_virtual_interface(params = {}) ⇒ Types::VirtualInterface

Provisions a private virtual interface to be owned by the specified Amazon Web Services account.

Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the ‘Confirming` state and is not available to handle traffic.

Examples:

Request syntax with placeholder values


resp = client.allocate_private_virtual_interface({
  connection_id: "ConnectionId", # required
  owner_account: "OwnerAccount", # required
  new_private_virtual_interface_allocation: { # required
    virtual_interface_name: "VirtualInterfaceName", # required
    vlan: 1, # required
    asn: 1, # required
    mtu: 1,
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    customer_address: "CustomerAddress",
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
  },
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection on which the private virtual interface is provisioned.

  • :owner_account (required, String) —

    The ID of the Amazon Web Services account that owns the virtual private interface.

  • :new_private_virtual_interface_allocation (required, Types::NewPrivateVirtualInterfaceAllocation) —

    Information about the private virtual interface.

Returns:

See Also:



867
868
869
870
 
# File 'lib/aws-sdk-directconnect/client.rb', line 867

def allocate_private_virtual_interface(params = {}, options = {})
  req = build_request(:allocate_private_virtual_interface, params)
  req.send_request(options)
end

#allocate_public_virtual_interface(params = {}) ⇒ Types::VirtualInterface

Provisions a public virtual interface to be owned by the specified Amazon Web Services account.

The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.

Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the ‘confirming` state and is not available to handle traffic.

When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

Examples:

Request syntax with placeholder values


resp = client.allocate_public_virtual_interface({
  connection_id: "ConnectionId", # required
  owner_account: "OwnerAccount", # required
  new_public_virtual_interface_allocation: { # required
    virtual_interface_name: "VirtualInterfaceName", # required
    vlan: 1, # required
    asn: 1, # required
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    route_filter_prefixes: [
      {
        cidr: "CIDR",
      },
    ],
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
  },
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection on which the public virtual interface is provisioned.

  • :owner_account (required, String) —

    The ID of the Amazon Web Services account that owns the public virtual interface.

  • :new_public_virtual_interface_allocation (required, Types::NewPublicVirtualInterfaceAllocation) —

    Information about the public virtual interface.

Returns:

See Also:



1002
1003
1004
1005
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1002

def allocate_public_virtual_interface(params = {}, options = {})
  req = build_request(:allocate_public_virtual_interface, params)
  req.send_request(options)
end

#allocate_transit_virtual_interface(params = {}) ⇒ Types::AllocateTransitVirtualInterfaceResult

Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.

The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.

After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the ‘requested` state and is not available to handle traffic.

Examples:

Request syntax with placeholder values


resp = client.allocate_transit_virtual_interface({
  connection_id: "ConnectionId", # required
  owner_account: "OwnerAccount", # required
  new_transit_virtual_interface_allocation: { # required
    virtual_interface_name: "VirtualInterfaceName",
    vlan: 1,
    asn: 1,
    mtu: 1,
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
  },
})

Response structure


resp.virtual_interface. #=> String
resp.virtual_interface.virtual_interface_id #=> String
resp.virtual_interface.location #=> String
resp.virtual_interface.connection_id #=> String
resp.virtual_interface.virtual_interface_type #=> String
resp.virtual_interface.virtual_interface_name #=> String
resp.virtual_interface.vlan #=> Integer
resp.virtual_interface.asn #=> Integer
resp.virtual_interface.amazon_side_asn #=> Integer
resp.virtual_interface.auth_key #=> String
resp.virtual_interface.amazon_address #=> String
resp.virtual_interface.customer_address #=> String
resp.virtual_interface.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.virtual_interface.customer_router_config #=> String
resp.virtual_interface.mtu #=> Integer
resp.virtual_interface.jumbo_frame_capable #=> Boolean
resp.virtual_interface.virtual_gateway_id #=> String
resp.virtual_interface.direct_connect_gateway_id #=> String
resp.virtual_interface.route_filter_prefixes #=> Array
resp.virtual_interface.route_filter_prefixes[0].cidr #=> String
resp.virtual_interface.bgp_peers #=> Array
resp.virtual_interface.bgp_peers[0].bgp_peer_id #=> String
resp.virtual_interface.bgp_peers[0].asn #=> Integer
resp.virtual_interface.bgp_peers[0].auth_key #=> String
resp.virtual_interface.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.bgp_peers[0].amazon_address #=> String
resp.virtual_interface.bgp_peers[0].customer_address #=> String
resp.virtual_interface.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.virtual_interface.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.virtual_interface.bgp_peers[0].aws_device_v2 #=> String
resp.virtual_interface.bgp_peers[0].aws_logical_device_id #=> String
resp.virtual_interface.region #=> String
resp.virtual_interface.aws_device_v2 #=> String
resp.virtual_interface.aws_logical_device_id #=> String
resp.virtual_interface.tags #=> Array
resp.virtual_interface.tags[0].key #=> String
resp.virtual_interface.tags[0].value #=> String
resp.virtual_interface.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection on which the transit virtual interface is provisioned.

  • :owner_account (required, String) —

    The ID of the Amazon Web Services account that owns the transit virtual interface.

  • :new_transit_virtual_interface_allocation (required, Types::NewTransitVirtualInterfaceAllocation) —

    Information about the transit virtual interface.

Returns:

See Also:



1103
1104
1105
1106
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1103

def allocate_transit_virtual_interface(params = {}, options = {})
  req = build_request(:allocate_transit_virtual_interface, params)
  req.send_request(options)
end

#associate_connection_with_lag(params = {}) ⇒ Types::Connection

Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that’s currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.

Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.

For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.

Examples:

Request syntax with placeholder values


resp = client.associate_connection_with_lag({
  connection_id: "ConnectionId", # required
  lag_id: "LagId", # required
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :lag_id (required, String) —

    The ID of the LAG with which to associate the connection.

Returns:

See Also:



1201
1202
1203
1204
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1201

def associate_connection_with_lag(params = {}, options = {})
  req = build_request(:associate_connection_with_lag, params)
  req.send_request(options)
end

#associate_hosted_connection(params = {}) ⇒ Types::Connection

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection’s connectivity to Amazon Web Services as it is being migrated.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.associate_hosted_connection({
  connection_id: "ConnectionId", # required
  parent_connection_id: "ConnectionId", # required
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the hosted connection.

  • :parent_connection_id (required, String) —

    The ID of the interconnect or the LAG.

Returns:

See Also:



1290
1291
1292
1293
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1290

def associate_hosted_connection(params = {}, options = {})
  req = build_request(:associate_hosted_connection, params)
  req.send_request(options)
end

#associate_mac_sec_key(params = {}) ⇒ Types::AssociateMacSecKeyResponse

Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.

You must supply either the ‘secretARN,` or the CKN/CAK (`ckn` and `cak`) pair in the request.

For information about MAC Security (MACsec) key considerations, see

MACsec pre-shared CKN/CAK key considerations ][1

in the *Direct

Connect User Guide*.

[1]: docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-key-consideration

Examples:

Request syntax with placeholder values


resp = client.associate_mac_sec_key({
  connection_id: "ConnectionId", # required
  secret_arn: "SecretARN",
  ckn: "Ckn",
  cak: "Cak",
})

Response structure


resp.connection_id #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

    You can use DescribeConnections or DescribeLags to retrieve connection ID.

  • :secret_arn (String) —

    The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key to associate with the dedicated connection.

    You can use DescribeConnections or DescribeLags to retrieve the MAC Security (MACsec) secret key.

    If you use this request parameter, you do not use the ‘ckn` and `cak` request parameters.

  • :ckn (String) —

    The MAC Security (MACsec) CKN to associate with the dedicated connection.

    You can create the CKN/CAK pair using an industry standard tool.

    The valid values are 64 hexadecimal characters (0-9, A-E).

    If you use this request parameter, you must use the ‘cak` request parameter and not use the `secretARN` request parameter.

  • :cak (String) —

    The MAC Security (MACsec) CAK to associate with the dedicated connection.

    You can create the CKN/CAK pair using an industry standard tool.

    The valid values are 64 hexadecimal characters (0-9, A-E).

    If you use this request parameter, you must use the ‘ckn` request parameter and not use the `secretARN` request parameter.

Returns:

See Also:



1376
1377
1378
1379
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1376

def associate_mac_sec_key(params = {}, options = {})
  req = build_request(:associate_mac_sec_key, params)
  req.send_request(options)
end

#associate_virtual_interface(params = {}) ⇒ Types::VirtualInterface

Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.

Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.

To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.

Examples:

Request syntax with placeholder values


resp = client.associate_virtual_interface({
  virtual_interface_id: "VirtualInterfaceId", # required
  connection_id: "ConnectionId", # required
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

  • :connection_id (required, String) —

    The ID of the LAG or connection.

Returns:

See Also:



1486
1487
1488
1489
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1486

def associate_virtual_interface(params = {}, options = {})
  req = build_request(:associate_virtual_interface, params)
  req.send_request(options)
end

#build_request(operation_name, params = {}) ⇒ Object

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.

Parameters:

  • params ({}) (defaults to: {}) 


4998
4999
5000
5001
5002
5003
5004
5005
5006
5007
5008
5009
5010
5011
5012
5013
5014
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4998

def build_request(operation_name, params = {})
  handlers = @handlers.for(operation_name)
  tracer = config.telemetry_provider.tracer_provider.tracer(
    Aws::Telemetry.module_to_tracer_name('Aws::DirectConnect')
  )
  context = Seahorse::Client::RequestContext.new(
    operation_name: operation_name,
    operation: config.api.operation(operation_name),
    client: self,
    params: params,
    config: config,
    tracer: tracer
  )
  context[:gem_name] = 'aws-sdk-directconnect'
  context[:gem_version] = '1.83.0'
  Seahorse::Client::Request.new(handlers, context)
end

#confirm_connection(params = {}) ⇒ Types::ConfirmConnectionResponse

Confirms the creation of the specified hosted connection on an interconnect.

Upon creation, the hosted connection is initially in the ‘Ordering` state, and remains in this state until the owner confirms creation of the hosted connection.

Examples:

Request syntax with placeholder values


resp = client.confirm_connection({
  connection_id: "ConnectionId", # required
})

Response structure


resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the hosted connection.

Returns:

See Also:



1519
1520
1521
1522
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1519

def confirm_connection(params = {}, options = {})
  req = build_request(:confirm_connection, params)
  req.send_request(options)
end

#confirm_customer_agreement(params = {}) ⇒ Types::ConfirmCustomerAgreementResponse

The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).

Examples:

Request syntax with placeholder values


resp = client.confirm_customer_agreement({
  agreement_name: "AgreementName",
})

Response structure


resp.status #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :agreement_name (String) —

    The name of the customer agreement.

Returns:

See Also:



1548
1549
1550
1551
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1548

def confirm_customer_agreement(params = {}, options = {})
  req = build_request(:confirm_customer_agreement, params)
  req.send_request(options)
end

#confirm_private_virtual_interface(params = {}) ⇒ Types::ConfirmPrivateVirtualInterfaceResponse

Accepts ownership of a private virtual interface created by another Amazon Web Services account.

After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.

Examples:

Request syntax with placeholder values


resp = client.confirm_private_virtual_interface({
  virtual_interface_id: "VirtualInterfaceId", # required
  virtual_gateway_id: "VirtualGatewayId",
  direct_connect_gateway_id: "DirectConnectGatewayId",
})

Response structure


resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

  • :virtual_gateway_id (String) —

    The ID of the virtual private gateway.

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

Returns:

See Also:



1590
1591
1592
1593
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1590

def confirm_private_virtual_interface(params = {}, options = {})
  req = build_request(:confirm_private_virtual_interface, params)
  req.send_request(options)
end

#confirm_public_virtual_interface(params = {}) ⇒ Types::ConfirmPublicVirtualInterfaceResponse

Accepts ownership of a public virtual interface created by another Amazon Web Services account.

After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.

Examples:

Request syntax with placeholder values


resp = client.confirm_public_virtual_interface({
  virtual_interface_id: "VirtualInterfaceId", # required
})

Response structure


resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

Returns:

See Also:



1622
1623
1624
1625
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1622

def confirm_public_virtual_interface(params = {}, options = {})
  req = build_request(:confirm_public_virtual_interface, params)
  req.send_request(options)
end

#confirm_transit_virtual_interface(params = {}) ⇒ Types::ConfirmTransitVirtualInterfaceResponse

Accepts ownership of a transit virtual interface created by another Amazon Web Services account.

After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.

Examples:

Request syntax with placeholder values


resp = client.confirm_transit_virtual_interface({
  virtual_interface_id: "VirtualInterfaceId", # required
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
})

Response structure


resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway.

Returns:

See Also:



1659
1660
1661
1662
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1659

def confirm_transit_virtual_interface(params = {}, options = {})
  req = build_request(:confirm_transit_virtual_interface, params)
  req.send_request(options)
end

#create_bgp_peer(params = {}) ⇒ Types::CreateBGPPeerResponse

Creates a BGP peer on the specified virtual interface.

You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.

If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.

When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see [ Address Allocation for Private Internets].

For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.

[1]: datatracker.ietf.org/doc/html/rfc1918

Examples:

Request syntax with placeholder values


resp = client.create_bgp_peer({
  virtual_interface_id: "VirtualInterfaceId",
  new_bgp_peer: {
    asn: 1,
    auth_key: "BGPAuthKey",
    address_family: "ipv4", # accepts ipv4, ipv6
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
  },
})

Response structure


resp.virtual_interface. #=> String
resp.virtual_interface.virtual_interface_id #=> String
resp.virtual_interface.location #=> String
resp.virtual_interface.connection_id #=> String
resp.virtual_interface.virtual_interface_type #=> String
resp.virtual_interface.virtual_interface_name #=> String
resp.virtual_interface.vlan #=> Integer
resp.virtual_interface.asn #=> Integer
resp.virtual_interface.amazon_side_asn #=> Integer
resp.virtual_interface.auth_key #=> String
resp.virtual_interface.amazon_address #=> String
resp.virtual_interface.customer_address #=> String
resp.virtual_interface.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.virtual_interface.customer_router_config #=> String
resp.virtual_interface.mtu #=> Integer
resp.virtual_interface.jumbo_frame_capable #=> Boolean
resp.virtual_interface.virtual_gateway_id #=> String
resp.virtual_interface.direct_connect_gateway_id #=> String
resp.virtual_interface.route_filter_prefixes #=> Array
resp.virtual_interface.route_filter_prefixes[0].cidr #=> String
resp.virtual_interface.bgp_peers #=> Array
resp.virtual_interface.bgp_peers[0].bgp_peer_id #=> String
resp.virtual_interface.bgp_peers[0].asn #=> Integer
resp.virtual_interface.bgp_peers[0].auth_key #=> String
resp.virtual_interface.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.bgp_peers[0].amazon_address #=> String
resp.virtual_interface.bgp_peers[0].customer_address #=> String
resp.virtual_interface.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.virtual_interface.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.virtual_interface.bgp_peers[0].aws_device_v2 #=> String
resp.virtual_interface.bgp_peers[0].aws_logical_device_id #=> String
resp.virtual_interface.region #=> String
resp.virtual_interface.aws_device_v2 #=> String
resp.virtual_interface.aws_logical_device_id #=> String
resp.virtual_interface.tags #=> Array
resp.virtual_interface.tags[0].key #=> String
resp.virtual_interface.tags[0].value #=> String
resp.virtual_interface.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (String) —

    The ID of the virtual interface.

  • :new_bgp_peer (Types::NewBGPPeer) —

    Information about the BGP peer.

Returns:

See Also:



1763
1764
1765
1766
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1763

def create_bgp_peer(params = {}, options = {})
  req = build_request(:create_bgp_peer, params)
  req.send_request(options)
end

#create_connection(params = {}) ⇒ Types::Connection

Creates a connection between a customer network and a specific Direct Connect location.

A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.

To find the locations for your Region, use DescribeLocations.

You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.

Examples:

Request syntax with placeholder values


resp = client.create_connection({
  location: "LocationCode", # required
  bandwidth: "Bandwidth", # required
  connection_name: "ConnectionName", # required
  lag_id: "LagId",
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
  provider_name: "ProviderName",
  request_mac_sec: false,
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :location (required, String) —

    The location of the connection.

  • :bandwidth (required, String) —

    The bandwidth of the connection.

  • :connection_name (required, String) —

    The name of the connection.

  • :lag_id (String) —

    The ID of the LAG.

  • :tags (Array<Types::Tag>) —

    The tags to associate with the lag.

  • :provider_name (String) —

    The name of the service provider associated with the requested connection.

  • :request_mac_sec (Boolean) —

    Indicates whether you want the connection to support MAC Security (MACsec).

    MAC Security (MACsec) is only available on dedicated connections. For information about MAC Security (MACsec) prerequisties, see [MACsec prerequisties] in the *Direct Connect User Guide*.

    [1]: docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-prerequisites

Returns:

See Also:



1891
1892
1893
1894
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1891

def create_connection(params = {}, options = {})
  req = build_request(:create_connection, params)
  req.send_request(options)
end

#create_direct_connect_gateway(params = {}) ⇒ Types::CreateDirectConnectGatewayResult

Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.

Examples:

Request syntax with placeholder values


resp = client.create_direct_connect_gateway({
  direct_connect_gateway_name: "DirectConnectGatewayName", # required
  amazon_side_asn: 1,
})

Response structure


resp.direct_connect_gateway.direct_connect_gateway_id #=> String
resp.direct_connect_gateway.direct_connect_gateway_name #=> String
resp.direct_connect_gateway.amazon_side_asn #=> Integer
resp.direct_connect_gateway. #=> String
resp.direct_connect_gateway.direct_connect_gateway_state #=> String, one of "pending", "available", "deleting", "deleted"
resp.direct_connect_gateway.state_change_error #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_name (required, String) —

    The name of the Direct Connect gateway.

  • :amazon_side_asn (Integer) —

    The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be configured on the Amazon side of the connection. The ASN must be in the private range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294. The default is 64512.

Returns:

See Also:



1939
1940
1941
1942
 
# File 'lib/aws-sdk-directconnect/client.rb', line 1939

def create_direct_connect_gateway(params = {}, options = {})
  req = build_request(:create_direct_connect_gateway, params)
  req.send_request(options)
end

#create_direct_connect_gateway_association(params = {}) ⇒ Types::CreateDirectConnectGatewayAssociationResult

Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.

Examples:

Request syntax with placeholder values


resp = client.create_direct_connect_gateway_association({
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
  gateway_id: "GatewayIdToAssociate",
  add_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
  virtual_gateway_id: "VirtualGatewayId",
})

Response structure


resp.direct_connect_gateway_association.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association. #=> String
resp.direct_connect_gateway_association.association_state #=> String, one of "associating", "associated", "disassociating", "disassociated", "updating"
resp.direct_connect_gateway_association.state_change_error #=> String
resp.direct_connect_gateway_association.associated_gateway.id #=> String
resp.direct_connect_gateway_association.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association.associated_gateway. #=> String
resp.direct_connect_gateway_association.associated_gateway.region #=> String
resp.direct_connect_gateway_association.association_id #=> String
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association.virtual_gateway_id #=> String
resp.direct_connect_gateway_association.virtual_gateway_region #=> String
resp.direct_connect_gateway_association. #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway.

  • :gateway_id (String) —

    The ID of the virtual private gateway or transit gateway.

  • :add_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    The Amazon VPC prefixes to advertise to the Direct Connect gateway

    This parameter is required when you create an association to a transit gateway.

    For information about how to set the prefixes, see [Allowed Prefixes] in the *Direct Connect User Guide*.

    [1]: docs.aws.amazon.com/directconnect/latest/UserGuide/multi-account-associate-vgw.html#allowed-prefixes

  • :virtual_gateway_id (String) —

    The ID of the virtual private gateway.

Returns:

See Also:



2008
2009
2010
2011
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2008

def create_direct_connect_gateway_association(params = {}, options = {})
  req = build_request(:create_direct_connect_gateway_association, params)
  req.send_request(options)
end

#create_direct_connect_gateway_association_proposal(params = {}) ⇒ Types::CreateDirectConnectGatewayAssociationProposalResult

Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.

You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.

Examples:

Request syntax with placeholder values


resp = client.create_direct_connect_gateway_association_proposal({
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
  direct_connect_gateway_owner_account: "OwnerAccount", # required
  gateway_id: "GatewayIdToAssociate", # required
  add_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
  remove_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
})

Response structure


resp.direct_connect_gateway_association_proposal.proposal_id #=> String
resp.direct_connect_gateway_association_proposal.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association_proposal. #=> String
resp.direct_connect_gateway_association_proposal.proposal_state #=> String, one of "requested", "accepted", "deleted"
resp.direct_connect_gateway_association_proposal.associated_gateway.id #=> String
resp.direct_connect_gateway_association_proposal.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association_proposal.associated_gateway. #=> String
resp.direct_connect_gateway_association_proposal.associated_gateway.region #=> String
resp.direct_connect_gateway_association_proposal.existing_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposal.existing_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association_proposal.requested_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposal.requested_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway.

  • :direct_connect_gateway_owner_account (required, String) —

    The ID of the Amazon Web Services account that owns the Direct Connect gateway.

  • :gateway_id (required, String) —

    The ID of the virtual private gateway or transit gateway.

  • :add_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    The Amazon VPC prefixes to advertise to the Direct Connect gateway.

  • :remove_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.

Returns:

See Also:



2077
2078
2079
2080
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2077

def create_direct_connect_gateway_association_proposal(params = {}, options = {})
  req = build_request(:create_direct_connect_gateway_association_proposal, params)
  req.send_request(options)
end

#create_interconnect(params = {}) ⇒ Types::Interconnect

Creates an interconnect between an Direct Connect Partner’s network and a specific Direct Connect location.

An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner’s network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner’s router, the other to an Direct Connect router.

You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.

For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.create_interconnect({
  interconnect_name: "InterconnectName", # required
  bandwidth: "Bandwidth", # required
  location: "LocationCode", # required
  lag_id: "LagId",
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
  provider_name: "ProviderName",
})

Response structure


resp.interconnect_id #=> String
resp.interconnect_name #=> String
resp.interconnect_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :interconnect_name (required, String) —

    The name of the interconnect.

  • :bandwidth (required, String) —

    The port bandwidth, in Gbps. The possible values are 1, 10, and 100.

  • :location (required, String) —

    The location of the interconnect.

  • :lag_id (String) —

    The ID of the LAG.

  • :tags (Array<Types::Tag>) —

    The tags to associate with the interconnect.

  • :provider_name (String) —

    The name of the service provider associated with the interconnect.

Returns:

See Also:



2185
2186
2187
2188
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2185

def create_interconnect(params = {}, options = {})
  req = build_request(:create_interconnect, params)
  req.send_request(options)
end

#create_lag(params = {}) ⇒ Types::Lag

Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.

All connections in a LAG must use the same bandwidth (either 1Gbps, 10Gbps, 100Gbps, or 400Gbps) and must terminate at the same Direct Connect endpoint.

You can have up to 10 dedicated connections per location. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created..

You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.

If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.

Examples:

Request syntax with placeholder values


resp = client.create_lag({
  number_of_connections: 1, # required
  location: "LocationCode", # required
  connections_bandwidth: "Bandwidth", # required
  lag_name: "LagName", # required
  connection_id: "ConnectionId",
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
  child_connection_tags: [
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
  provider_name: "ProviderName",
  request_mac_sec: false,
})

Response structure


resp.connections_bandwidth #=> String
resp.number_of_connections #=> Integer
resp.lag_id #=> String
resp. #=> String
resp.lag_name #=> String
resp.lag_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.location #=> String
resp.region #=> String
resp.minimum_links #=> Integer
resp.aws_device #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String
resp.allows_hosted_connections #=> Boolean
resp.jumbo_frame_capable #=> Boolean
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :number_of_connections (required, Integer) —

    The number of physical dedicated connections initially provisioned and bundled by the LAG. You can have a maximum of four connections when the port speed is 1Gbps or 10Gbps, or two when the port speed is 100Gbps or 400Gbps.

  • :location (required, String) —

    The location for the LAG.

  • :connections_bandwidth (required, String) —

    The bandwidth of the individual physical dedicated connections bundled by the LAG. The possible values are 1Gbps,10Gbps, 100Gbps, and 400Gbps.

  • :lag_name (required, String) —

    The name of the LAG.

  • :connection_id (String) —

    The ID of an existing dedicated connection to migrate to the LAG.

  • :tags (Array<Types::Tag>) —

    The tags to associate with the LAG.

  • :child_connection_tags (Array<Types::Tag>) —

    The tags to associate with the automtically created LAGs.

  • :provider_name (String) —

    The name of the service provider associated with the LAG.

  • :request_mac_sec (Boolean) —

    Indicates whether the connection will support MAC Security (MACsec).

    <note markdown=“1”> All connections in the LAG must be capable of supporting MAC Security (MACsec). For information about MAC Security (MACsec) prerequisties, see [MACsec prerequisties] in the *Direct Connect User Guide*.

    </note>

    [1]: docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-prerequisites

Returns:

See Also:



2370
2371
2372
2373
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2370

def create_lag(params = {}, options = {})
  req = build_request(:create_lag, params)
  req.send_request(options)
end

#create_private_virtual_interface(params = {}) ⇒ Types::VirtualInterface

Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.

Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn’t updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.

Examples:

Request syntax with placeholder values


resp = client.create_private_virtual_interface({
  connection_id: "ConnectionId", # required
  new_private_virtual_interface: { # required
    virtual_interface_name: "VirtualInterfaceName", # required
    vlan: 1, # required
    asn: 1, # required
    mtu: 1,
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    virtual_gateway_id: "VirtualGatewayId",
    direct_connect_gateway_id: "DirectConnectGatewayId",
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
    enable_site_link: false,
  },
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :new_private_virtual_interface (required, Types::NewPrivateVirtualInterface) —

    Information about the private virtual interface.

Returns:

See Also:



2499
2500
2501
2502
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2499

def create_private_virtual_interface(params = {}, options = {})
  req = build_request(:create_private_virtual_interface, params)
  req.send_request(options)
end

#create_public_virtual_interface(params = {}) ⇒ Types::VirtualInterface

Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.

When creating an IPv6 public virtual interface (‘addressFamily` is `ipv6`), leave the `customer` and `amazon` address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.

Examples:

Request syntax with placeholder values


resp = client.create_public_virtual_interface({
  connection_id: "ConnectionId", # required
  new_public_virtual_interface: { # required
    virtual_interface_name: "VirtualInterfaceName", # required
    vlan: 1, # required
    asn: 1, # required
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    route_filter_prefixes: [
      {
        cidr: "CIDR",
      },
    ],
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
  },
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :new_public_virtual_interface (required, Types::NewPublicVirtualInterface) —

    Information about the public virtual interface.

Returns:

See Also:



2620
2621
2622
2623
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2620

def create_public_virtual_interface(params = {}, options = {})
  req = build_request(:create_public_virtual_interface, params)
  req.send_request(options)
end

#create_transit_virtual_interface(params = {}) ⇒ Types::CreateTransitVirtualInterfaceResult

Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.

If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.

A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn’t updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.

Examples:

Request syntax with placeholder values


resp = client.create_transit_virtual_interface({
  connection_id: "ConnectionId", # required
  new_transit_virtual_interface: { # required
    virtual_interface_name: "VirtualInterfaceName",
    vlan: 1,
    asn: 1,
    mtu: 1,
    auth_key: "BGPAuthKey",
    amazon_address: "AmazonAddress",
    customer_address: "CustomerAddress",
    address_family: "ipv4", # accepts ipv4, ipv6
    direct_connect_gateway_id: "DirectConnectGatewayId",
    tags: [
      {
        key: "TagKey", # required
        value: "TagValue",
      },
    ],
    enable_site_link: false,
  },
})

Response structure


resp.virtual_interface. #=> String
resp.virtual_interface.virtual_interface_id #=> String
resp.virtual_interface.location #=> String
resp.virtual_interface.connection_id #=> String
resp.virtual_interface.virtual_interface_type #=> String
resp.virtual_interface.virtual_interface_name #=> String
resp.virtual_interface.vlan #=> Integer
resp.virtual_interface.asn #=> Integer
resp.virtual_interface.amazon_side_asn #=> Integer
resp.virtual_interface.auth_key #=> String
resp.virtual_interface.amazon_address #=> String
resp.virtual_interface.customer_address #=> String
resp.virtual_interface.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.virtual_interface.customer_router_config #=> String
resp.virtual_interface.mtu #=> Integer
resp.virtual_interface.jumbo_frame_capable #=> Boolean
resp.virtual_interface.virtual_gateway_id #=> String
resp.virtual_interface.direct_connect_gateway_id #=> String
resp.virtual_interface.route_filter_prefixes #=> Array
resp.virtual_interface.route_filter_prefixes[0].cidr #=> String
resp.virtual_interface.bgp_peers #=> Array
resp.virtual_interface.bgp_peers[0].bgp_peer_id #=> String
resp.virtual_interface.bgp_peers[0].asn #=> Integer
resp.virtual_interface.bgp_peers[0].auth_key #=> String
resp.virtual_interface.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.bgp_peers[0].amazon_address #=> String
resp.virtual_interface.bgp_peers[0].customer_address #=> String
resp.virtual_interface.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.virtual_interface.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.virtual_interface.bgp_peers[0].aws_device_v2 #=> String
resp.virtual_interface.bgp_peers[0].aws_logical_device_id #=> String
resp.virtual_interface.region #=> String
resp.virtual_interface.aws_device_v2 #=> String
resp.virtual_interface.aws_logical_device_id #=> String
resp.virtual_interface.tags #=> Array
resp.virtual_interface.tags[0].key #=> String
resp.virtual_interface.tags[0].value #=> String
resp.virtual_interface.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :new_transit_virtual_interface (required, Types::NewTransitVirtualInterface) —

    Information about the transit virtual interface.

Returns:

See Also:



2727
2728
2729
2730
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2727

def create_transit_virtual_interface(params = {}, options = {})
  req = build_request(:create_transit_virtual_interface, params)
  req.send_request(options)
end

#delete_bgp_peer(params = {}) ⇒ Types::DeleteBGPPeerResponse

Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.

You cannot delete the last BGP peer from a virtual interface.

Examples:

Request syntax with placeholder values


resp = client.delete_bgp_peer({
  virtual_interface_id: "VirtualInterfaceId",
  asn: 1,
  customer_address: "CustomerAddress",
  bgp_peer_id: "BGPPeerId",
})

Response structure


resp.virtual_interface. #=> String
resp.virtual_interface.virtual_interface_id #=> String
resp.virtual_interface.location #=> String
resp.virtual_interface.connection_id #=> String
resp.virtual_interface.virtual_interface_type #=> String
resp.virtual_interface.virtual_interface_name #=> String
resp.virtual_interface.vlan #=> Integer
resp.virtual_interface.asn #=> Integer
resp.virtual_interface.amazon_side_asn #=> Integer
resp.virtual_interface.auth_key #=> String
resp.virtual_interface.amazon_address #=> String
resp.virtual_interface.customer_address #=> String
resp.virtual_interface.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.virtual_interface.customer_router_config #=> String
resp.virtual_interface.mtu #=> Integer
resp.virtual_interface.jumbo_frame_capable #=> Boolean
resp.virtual_interface.virtual_gateway_id #=> String
resp.virtual_interface.direct_connect_gateway_id #=> String
resp.virtual_interface.route_filter_prefixes #=> Array
resp.virtual_interface.route_filter_prefixes[0].cidr #=> String
resp.virtual_interface.bgp_peers #=> Array
resp.virtual_interface.bgp_peers[0].bgp_peer_id #=> String
resp.virtual_interface.bgp_peers[0].asn #=> Integer
resp.virtual_interface.bgp_peers[0].auth_key #=> String
resp.virtual_interface.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface.bgp_peers[0].amazon_address #=> String
resp.virtual_interface.bgp_peers[0].customer_address #=> String
resp.virtual_interface.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.virtual_interface.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.virtual_interface.bgp_peers[0].aws_device_v2 #=> String
resp.virtual_interface.bgp_peers[0].aws_logical_device_id #=> String
resp.virtual_interface.region #=> String
resp.virtual_interface.aws_device_v2 #=> String
resp.virtual_interface.aws_logical_device_id #=> String
resp.virtual_interface.tags #=> Array
resp.virtual_interface.tags[0].key #=> String
resp.virtual_interface.tags[0].value #=> String
resp.virtual_interface.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (String) —

    The ID of the virtual interface.

  • :asn (Integer) —

    The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

  • :customer_address (String) —

    The IP address assigned to the customer interface.

  • :bgp_peer_id (String) —

    The ID of the BGP peer.

Returns:

See Also:



2809
2810
2811
2812
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2809

def delete_bgp_peer(params = {}, options = {})
  req = build_request(:delete_bgp_peer, params)
  req.send_request(options)
end

#delete_connection(params = {}) ⇒ Types::Connection

Deletes the specified connection.

Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.

Examples:

Request syntax with placeholder values


resp = client.delete_connection({
  connection_id: "ConnectionId", # required
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

Returns:

See Also:



2890
2891
2892
2893
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2890

def delete_connection(params = {}, options = {})
  req = build_request(:delete_connection, params)
  req.send_request(options)
end

#delete_direct_connect_gateway(params = {}) ⇒ Types::DeleteDirectConnectGatewayResult

Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.

Examples:

Request syntax with placeholder values


resp = client.delete_direct_connect_gateway({
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
})

Response structure


resp.direct_connect_gateway.direct_connect_gateway_id #=> String
resp.direct_connect_gateway.direct_connect_gateway_name #=> String
resp.direct_connect_gateway.amazon_side_asn #=> Integer
resp.direct_connect_gateway. #=> String
resp.direct_connect_gateway.direct_connect_gateway_state #=> String, one of "pending", "available", "deleting", "deleted"
resp.direct_connect_gateway.state_change_error #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway.

Returns:

See Also:



2926
2927
2928
2929
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2926

def delete_direct_connect_gateway(params = {}, options = {})
  req = build_request(:delete_direct_connect_gateway, params)
  req.send_request(options)
end

#delete_direct_connect_gateway_association(params = {}) ⇒ Types::DeleteDirectConnectGatewayAssociationResult

Deletes the association between the specified Direct Connect gateway and virtual private gateway.

We recommend that you specify the ‘associationID` to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify the `virtualGatewayId` and `directConnectGatewayId` to delete an association.

Examples:

Request syntax with placeholder values


resp = client.delete_direct_connect_gateway_association({
  association_id: "DirectConnectGatewayAssociationId",
  direct_connect_gateway_id: "DirectConnectGatewayId",
  virtual_gateway_id: "VirtualGatewayId",
})

Response structure


resp.direct_connect_gateway_association.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association. #=> String
resp.direct_connect_gateway_association.association_state #=> String, one of "associating", "associated", "disassociating", "disassociated", "updating"
resp.direct_connect_gateway_association.state_change_error #=> String
resp.direct_connect_gateway_association.associated_gateway.id #=> String
resp.direct_connect_gateway_association.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association.associated_gateway. #=> String
resp.direct_connect_gateway_association.associated_gateway.region #=> String
resp.direct_connect_gateway_association.association_id #=> String
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association.virtual_gateway_id #=> String
resp.direct_connect_gateway_association.virtual_gateway_region #=> String
resp.direct_connect_gateway_association. #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :association_id (String) —

    The ID of the Direct Connect gateway association.

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

  • :virtual_gateway_id (String) —

    The ID of the virtual private gateway.

Returns:

See Also:



2981
2982
2983
2984
 
# File 'lib/aws-sdk-directconnect/client.rb', line 2981

def delete_direct_connect_gateway_association(params = {}, options = {})
  req = build_request(:delete_direct_connect_gateway_association, params)
  req.send_request(options)
end

#delete_direct_connect_gateway_association_proposal(params = {}) ⇒ Types::DeleteDirectConnectGatewayAssociationProposalResult

Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.

Examples:

Request syntax with placeholder values


resp = client.delete_direct_connect_gateway_association_proposal({
  proposal_id: "DirectConnectGatewayAssociationProposalId", # required
})

Response structure


resp.direct_connect_gateway_association_proposal.proposal_id #=> String
resp.direct_connect_gateway_association_proposal.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association_proposal. #=> String
resp.direct_connect_gateway_association_proposal.proposal_state #=> String, one of "requested", "accepted", "deleted"
resp.direct_connect_gateway_association_proposal.associated_gateway.id #=> String
resp.direct_connect_gateway_association_proposal.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association_proposal.associated_gateway. #=> String
resp.direct_connect_gateway_association_proposal.associated_gateway.region #=> String
resp.direct_connect_gateway_association_proposal.existing_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposal.existing_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association_proposal.requested_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposal.requested_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :proposal_id (required, String) —

    The ID of the proposal.

Returns:

See Also:



3021
3022
3023
3024
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3021

def delete_direct_connect_gateway_association_proposal(params = {}, options = {})
  req = build_request(:delete_direct_connect_gateway_association_proposal, params)
  req.send_request(options)
end

#delete_interconnect(params = {}) ⇒ Types::DeleteInterconnectResponse

Deletes the specified interconnect.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.delete_interconnect({
  interconnect_id: "InterconnectId", # required
})

Response structure


resp.interconnect_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :interconnect_id (required, String) —

    The ID of the interconnect.

Returns:

See Also:



3053
3054
3055
3056
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3053

def delete_interconnect(params = {}, options = {})
  req = build_request(:delete_interconnect, params)
  req.send_request(options)
end

#delete_lag(params = {}) ⇒ Types::Lag

Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

Examples:

Request syntax with placeholder values


resp = client.delete_lag({
  lag_id: "LagId", # required
})

Response structure


resp.connections_bandwidth #=> String
resp.number_of_connections #=> Integer
resp.lag_id #=> String
resp. #=> String
resp.lag_name #=> String
resp.lag_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.location #=> String
resp.region #=> String
resp.minimum_links #=> Integer
resp.aws_device #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String
resp.allows_hosted_connections #=> Boolean
resp.jumbo_frame_capable #=> Boolean
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :lag_id (required, String) —

    The ID of the LAG.

Returns:

See Also:



3156
3157
3158
3159
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3156

def delete_lag(params = {}, options = {})
  req = build_request(:delete_lag, params)
  req.send_request(options)
end

#delete_virtual_interface(params = {}) ⇒ Types::DeleteVirtualInterfaceResponse

Deletes a virtual interface.

Examples:

Request syntax with placeholder values


resp = client.delete_virtual_interface({
  virtual_interface_id: "VirtualInterfaceId", # required
})

Response structure


resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

Returns:

See Also:



3184
3185
3186
3187
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3184

def delete_virtual_interface(params = {}, options = {})
  req = build_request(:delete_virtual_interface, params)
  req.send_request(options)
end

#describe_connection_loa(params = {}) ⇒ Types::DescribeConnectionLoaResponse

<note markdown=“1”> Deprecated. Use DescribeLoa instead.

</note>

Gets the LOA-CFA for a connection.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see [Requesting Cross Connects at Direct Connect Locations] in the *Direct Connect User Guide*.

[1]: docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html

Examples:

Request syntax with placeholder values


resp = client.describe_connection_loa({
  connection_id: "ConnectionId", # required
  provider_name: "ProviderName",
  loa_content_type: "application/pdf", # accepts application/pdf
})

Response structure


resp.loa.loa_content #=> String
resp.loa.loa_content_type #=> String, one of "application/pdf"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :provider_name (String) —

    The name of the APN partner or service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.

  • :loa_content_type (String) —

    The standard media type for the LOA-CFA document. The only supported value is application/pdf.

Returns:

See Also:



3240
3241
3242
3243
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3240

def describe_connection_loa(params = {}, options = {})
  req = build_request(:describe_connection_loa, params)
  req.send_request(options)
end

#describe_connections(params = {}) ⇒ Types::Connections

Displays the specified connection or all connections in this Region.

Examples:

Request syntax with placeholder values


resp = client.describe_connections({
  connection_id: "ConnectionId",
})

Response structure


resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (String) —

    The ID of the connection.

Returns:

See Also:



3296
3297
3298
3299
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3296

def describe_connections(params = {}, options = {})
  req = build_request(:describe_connections, params)
  req.send_request(options)
end

#describe_connections_on_interconnect(params = {}) ⇒ Types::Connections

<note markdown=“1”> Deprecated. Use DescribeHostedConnections instead.

</note>

Lists the connections that have been provisioned on the specified interconnect.

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.describe_connections_on_interconnect({
  interconnect_id: "InterconnectId", # required
})

Response structure


resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :interconnect_id (required, String) —

    The ID of the interconnect.

Returns:

See Also:



3361
3362
3363
3364
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3361

def describe_connections_on_interconnect(params = {}, options = {})
  req = build_request(:describe_connections_on_interconnect, params)
  req.send_request(options)
end

#describe_customer_metadata(params = {}) ⇒ Types::DescribeCustomerMetadataResponse

Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.

Examples:

Response structure


resp.agreements #=> Array
resp.agreements[0].agreement_name #=> String
resp.agreements[0].status #=> String
resp.nni_partner_type #=> String, one of "v1", "v2", "nonPartner"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Returns:

See Also:



3386
3387
3388
3389
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3386

def describe_customer_metadata(params = {}, options = {})
  req = build_request(:describe_customer_metadata, params)
  req.send_request(options)
end

#describe_direct_connect_gateway_association_proposals(params = {}) ⇒ Types::DescribeDirectConnectGatewayAssociationProposalsResult

Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.

Examples:

Request syntax with placeholder values


resp = client.describe_direct_connect_gateway_association_proposals({
  direct_connect_gateway_id: "DirectConnectGatewayId",
  proposal_id: "DirectConnectGatewayAssociationProposalId",
  associated_gateway_id: "AssociatedGatewayId",
  max_results: 1,
  next_token: "PaginationToken",
})

Response structure


resp.direct_connect_gateway_association_proposals #=> Array
resp.direct_connect_gateway_association_proposals[0].proposal_id #=> String
resp.direct_connect_gateway_association_proposals[0].direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association_proposals[0]. #=> String
resp.direct_connect_gateway_association_proposals[0].proposal_state #=> String, one of "requested", "accepted", "deleted"
resp.direct_connect_gateway_association_proposals[0].associated_gateway.id #=> String
resp.direct_connect_gateway_association_proposals[0].associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association_proposals[0].associated_gateway. #=> String
resp.direct_connect_gateway_association_proposals[0].associated_gateway.region #=> String
resp.direct_connect_gateway_association_proposals[0].existing_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposals[0].existing_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association_proposals[0].requested_allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association_proposals[0].requested_allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.next_token #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

  • :proposal_id (String) —

    The ID of the proposal.

  • :associated_gateway_id (String) —

    The ID of the associated gateway.

  • :max_results (Integer) —

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned ‘nextToken` value.

    If ‘MaxResults` is given a value larger than 100, only 100 results are returned.

  • :next_token (String) —

    The token for the next page of results.

Returns:

See Also:



3451
3452
3453
3454
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3451

def describe_direct_connect_gateway_association_proposals(params = {}, options = {})
  req = build_request(:describe_direct_connect_gateway_association_proposals, params)
  req.send_request(options)
end

#describe_direct_connect_gateway_associations(params = {}) ⇒ Types::DescribeDirectConnectGatewayAssociationsResult

Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:

  • A Direct Connect gateway

    The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.

  • A virtual private gateway

    The response contains the Direct Connect gateway.

  • A transit gateway

    The response contains the Direct Connect gateway.

  • A Direct Connect gateway and a virtual private gateway

    The response contains the association between the Direct Connect gateway and virtual private gateway.

  • A Direct Connect gateway and a transit gateway

    The response contains the association between the Direct Connect gateway and transit gateway.

Examples:

Request syntax with placeholder values


resp = client.describe_direct_connect_gateway_associations({
  association_id: "DirectConnectGatewayAssociationId",
  associated_gateway_id: "AssociatedGatewayId",
  direct_connect_gateway_id: "DirectConnectGatewayId",
  max_results: 1,
  next_token: "PaginationToken",
  virtual_gateway_id: "VirtualGatewayId",
})

Response structure


resp.direct_connect_gateway_associations #=> Array
resp.direct_connect_gateway_associations[0].direct_connect_gateway_id #=> String
resp.direct_connect_gateway_associations[0]. #=> String
resp.direct_connect_gateway_associations[0].association_state #=> String, one of "associating", "associated", "disassociating", "disassociated", "updating"
resp.direct_connect_gateway_associations[0].state_change_error #=> String
resp.direct_connect_gateway_associations[0].associated_gateway.id #=> String
resp.direct_connect_gateway_associations[0].associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_associations[0].associated_gateway. #=> String
resp.direct_connect_gateway_associations[0].associated_gateway.region #=> String
resp.direct_connect_gateway_associations[0].association_id #=> String
resp.direct_connect_gateway_associations[0].allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_associations[0].allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_associations[0].virtual_gateway_id #=> String
resp.direct_connect_gateway_associations[0].virtual_gateway_region #=> String
resp.direct_connect_gateway_associations[0]. #=> String
resp.next_token #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :association_id (String) —

    The ID of the Direct Connect gateway association.

  • :associated_gateway_id (String) —

    The ID of the associated gateway.

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

  • :max_results (Integer) —

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned ‘nextToken` value.

    If ‘MaxResults` is given a value larger than 100, only 100 results are returned.

  • :next_token (String) —

    The token provided in the previous call to retrieve the next page.

  • :virtual_gateway_id (String) —

    The ID of the virtual private gateway or transit gateway.

Returns:

See Also:



3545
3546
3547
3548
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3545

def describe_direct_connect_gateway_associations(params = {}, options = {})
  req = build_request(:describe_direct_connect_gateway_associations, params)
  req.send_request(options)
end

#describe_direct_connect_gateway_attachments(params = {}) ⇒ Types::DescribeDirectConnectGatewayAttachmentsResult

Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.

Examples:

Request syntax with placeholder values


resp = client.describe_direct_connect_gateway_attachments({
  direct_connect_gateway_id: "DirectConnectGatewayId",
  virtual_interface_id: "VirtualInterfaceId",
  max_results: 1,
  next_token: "PaginationToken",
})

Response structure


resp.direct_connect_gateway_attachments #=> Array
resp.direct_connect_gateway_attachments[0].direct_connect_gateway_id #=> String
resp.direct_connect_gateway_attachments[0].virtual_interface_id #=> String
resp.direct_connect_gateway_attachments[0].virtual_interface_region #=> String
resp.direct_connect_gateway_attachments[0]. #=> String
resp.direct_connect_gateway_attachments[0].attachment_state #=> String, one of "attaching", "attached", "detaching", "detached"
resp.direct_connect_gateway_attachments[0].attachment_type #=> String, one of "TransitVirtualInterface", "PrivateVirtualInterface"
resp.direct_connect_gateway_attachments[0].state_change_error #=> String
resp.next_token #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

  • :virtual_interface_id (String) —

    The ID of the virtual interface.

  • :max_results (Integer) —

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned ‘nextToken` value.

    If ‘MaxResults` is given a value larger than 100, only 100 results are returned.

  • :next_token (String) —

    The token provided in the previous call to retrieve the next page.

Returns:

See Also:



3606
3607
3608
3609
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3606

def describe_direct_connect_gateway_attachments(params = {}, options = {})
  req = build_request(:describe_direct_connect_gateway_attachments, params)
  req.send_request(options)
end

#describe_direct_connect_gateways(params = {}) ⇒ Types::DescribeDirectConnectGatewaysResult

Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.

Examples:

Request syntax with placeholder values


resp = client.describe_direct_connect_gateways({
  direct_connect_gateway_id: "DirectConnectGatewayId",
  max_results: 1,
  next_token: "PaginationToken",
})

Response structure


resp.direct_connect_gateways #=> Array
resp.direct_connect_gateways[0].direct_connect_gateway_id #=> String
resp.direct_connect_gateways[0].direct_connect_gateway_name #=> String
resp.direct_connect_gateways[0].amazon_side_asn #=> Integer
resp.direct_connect_gateways[0]. #=> String
resp.direct_connect_gateways[0].direct_connect_gateway_state #=> String, one of "pending", "available", "deleting", "deleted"
resp.direct_connect_gateways[0].state_change_error #=> String
resp.next_token #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (String) —

    The ID of the Direct Connect gateway.

  • :max_results (Integer) —

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned ‘nextToken` value.

    If ‘MaxResults` is given a value larger than 100, only 100 results are returned.

  • :next_token (String) —

    The token provided in the previous call to retrieve the next page.

Returns:

See Also:



3656
3657
3658
3659
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3656

def describe_direct_connect_gateways(params = {}, options = {})
  req = build_request(:describe_direct_connect_gateways, params)
  req.send_request(options)
end

#describe_hosted_connections(params = {}) ⇒ Types::Connections

Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).

<note markdown=“1”> Intended for use by Direct Connect Partners only.

</note>

Examples:

Request syntax with placeholder values


resp = client.describe_hosted_connections({
  connection_id: "ConnectionId", # required
})

Response structure


resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the interconnect or LAG.

Returns:

See Also:



3717
3718
3719
3720
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3717

def describe_hosted_connections(params = {}, options = {})
  req = build_request(:describe_hosted_connections, params)
  req.send_request(options)
end

#describe_interconnect_loa(params = {}) ⇒ Types::DescribeInterconnectLoaResponse

<note markdown=“1”> Deprecated. Use DescribeLoa instead.

</note>

Gets the LOA-CFA for the specified interconnect.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see [Requesting Cross Connects at Direct Connect Locations] in the *Direct Connect User Guide*.

[1]: docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html

Examples:

Request syntax with placeholder values


resp = client.describe_interconnect_loa({
  interconnect_id: "InterconnectId", # required
  provider_name: "ProviderName",
  loa_content_type: "application/pdf", # accepts application/pdf
})

Response structure


resp.loa.loa_content #=> String
resp.loa.loa_content_type #=> String, one of "application/pdf"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :interconnect_id (required, String) —

    The ID of the interconnect.

  • :provider_name (String) —

    The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.

  • :loa_content_type (String) —

    The standard media type for the LOA-CFA document. The only supported value is application/pdf.

Returns:

See Also:



3772
3773
3774
3775
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3772

def describe_interconnect_loa(params = {}, options = {})
  req = build_request(:describe_interconnect_loa, params)
  req.send_request(options)
end

#describe_interconnects(params = {}) ⇒ Types::Interconnects

Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.

Examples:

Request syntax with placeholder values


resp = client.describe_interconnects({
  interconnect_id: "InterconnectId",
})

Response structure


resp.interconnects #=> Array
resp.interconnects[0].interconnect_id #=> String
resp.interconnects[0].interconnect_name #=> String
resp.interconnects[0].interconnect_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.interconnects[0].region #=> String
resp.interconnects[0].location #=> String
resp.interconnects[0].bandwidth #=> String
resp.interconnects[0].loa_issue_time #=> Time
resp.interconnects[0].lag_id #=> String
resp.interconnects[0].aws_device #=> String
resp.interconnects[0].jumbo_frame_capable #=> Boolean
resp.interconnects[0].aws_device_v2 #=> String
resp.interconnects[0].aws_logical_device_id #=> String
resp.interconnects[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.interconnects[0].tags #=> Array
resp.interconnects[0].tags[0].key #=> String
resp.interconnects[0].tags[0].value #=> String
resp.interconnects[0].provider_name #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :interconnect_id (String) —

    The ID of the interconnect.

Returns:

See Also:



3818
3819
3820
3821
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3818

def describe_interconnects(params = {}, options = {})
  req = build_request(:describe_interconnects, params)
  req.send_request(options)
end

#describe_lags(params = {}) ⇒ Types::Lags

Describes all your link aggregation groups (LAG) or the specified LAG.

Examples:

Request syntax with placeholder values


resp = client.describe_lags({
  lag_id: "LagId",
})

Response structure


resp.lags #=> Array
resp.lags[0].connections_bandwidth #=> String
resp.lags[0].number_of_connections #=> Integer
resp.lags[0].lag_id #=> String
resp.lags[0]. #=> String
resp.lags[0].lag_name #=> String
resp.lags[0].lag_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.lags[0].location #=> String
resp.lags[0].region #=> String
resp.lags[0].minimum_links #=> Integer
resp.lags[0].aws_device #=> String
resp.lags[0].aws_device_v2 #=> String
resp.lags[0].aws_logical_device_id #=> String
resp.lags[0].connections #=> Array
resp.lags[0].connections[0]. #=> String
resp.lags[0].connections[0].connection_id #=> String
resp.lags[0].connections[0].connection_name #=> String
resp.lags[0].connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.lags[0].connections[0].region #=> String
resp.lags[0].connections[0].location #=> String
resp.lags[0].connections[0].bandwidth #=> String
resp.lags[0].connections[0].vlan #=> Integer
resp.lags[0].connections[0].partner_name #=> String
resp.lags[0].connections[0].loa_issue_time #=> Time
resp.lags[0].connections[0].lag_id #=> String
resp.lags[0].connections[0].aws_device #=> String
resp.lags[0].connections[0].jumbo_frame_capable #=> Boolean
resp.lags[0].connections[0].aws_device_v2 #=> String
resp.lags[0].connections[0].aws_logical_device_id #=> String
resp.lags[0].connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.lags[0].connections[0].tags #=> Array
resp.lags[0].connections[0].tags[0].key #=> String
resp.lags[0].connections[0].tags[0].value #=> String
resp.lags[0].connections[0].provider_name #=> String
resp.lags[0].connections[0].mac_sec_capable #=> Boolean
resp.lags[0].connections[0].port_encryption_status #=> String
resp.lags[0].connections[0].encryption_mode #=> String
resp.lags[0].connections[0].mac_sec_keys #=> Array
resp.lags[0].connections[0].mac_sec_keys[0].secret_arn #=> String
resp.lags[0].connections[0].mac_sec_keys[0].ckn #=> String
resp.lags[0].connections[0].mac_sec_keys[0].state #=> String
resp.lags[0].connections[0].mac_sec_keys[0].start_on #=> String
resp.lags[0].allows_hosted_connections #=> Boolean
resp.lags[0].jumbo_frame_capable #=> Boolean
resp.lags[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.lags[0].tags #=> Array
resp.lags[0].tags[0].key #=> String
resp.lags[0].tags[0].value #=> String
resp.lags[0].provider_name #=> String
resp.lags[0].mac_sec_capable #=> Boolean
resp.lags[0].encryption_mode #=> String
resp.lags[0].mac_sec_keys #=> Array
resp.lags[0].mac_sec_keys[0].secret_arn #=> String
resp.lags[0].mac_sec_keys[0].ckn #=> String
resp.lags[0].mac_sec_keys[0].state #=> String
resp.lags[0].mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :lag_id (String) —

    The ID of the LAG.

Returns:

  • (Types::Lags) —

    Returns a response object which responds to the following methods:

    • #lags => Array&lt;Types::Lag&gt;

See Also:



3901
3902
3903
3904
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3901

def describe_lags(params = {}, options = {})
  req = build_request(:describe_lags, params)
  req.send_request(options)
end

#describe_loa(params = {}) ⇒ Types::Loa

Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see [Requesting Cross Connects at Direct Connect Locations] in the *Direct Connect User Guide*.

[1]: docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html

Examples:

Request syntax with placeholder values


resp = client.describe_loa({
  connection_id: "ConnectionId", # required
  provider_name: "ProviderName",
  loa_content_type: "application/pdf", # accepts application/pdf
})

Response structure


resp.loa_content #=> String
resp.loa_content_type #=> String, one of "application/pdf"

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of a connection, LAG, or interconnect.

  • :provider_name (String) —

    The name of the service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.

  • :loa_content_type (String) —

    The standard media type for the LOA-CFA document. The only supported value is application/pdf.

Returns:

See Also:



3954
3955
3956
3957
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3954

def describe_loa(params = {}, options = {})
  req = build_request(:describe_loa, params)
  req.send_request(options)
end

#describe_locations(params = {}) ⇒ Types::Locations

Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.

Examples:

Response structure


resp.locations #=> Array
resp.locations[0].location_code #=> String
resp.locations[0].location_name #=> String
resp.locations[0].region #=> String
resp.locations[0].available_port_speeds #=> Array
resp.locations[0].available_port_speeds[0] #=> String
resp.locations[0].available_providers #=> Array
resp.locations[0].available_providers[0] #=> String
resp.locations[0].available_mac_sec_port_speeds #=> Array
resp.locations[0].available_mac_sec_port_speeds[0] #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Returns:

  • (Types::Locations) —

    Returns a response object which responds to the following methods:

See Also:



3984
3985
3986
3987
 
# File 'lib/aws-sdk-directconnect/client.rb', line 3984

def describe_locations(params = {}, options = {})
  req = build_request(:describe_locations, params)
  req.send_request(options)
end

#describe_router_configuration(params = {}) ⇒ Types::DescribeRouterConfigurationResponse

Details about the router.

Examples:

Request syntax with placeholder values


resp = client.describe_router_configuration({
  virtual_interface_id: "VirtualInterfaceId", # required
  router_type_identifier: "RouterTypeIdentifier",
})

Response structure


resp.customer_router_config #=> String
resp.router.vendor #=> String
resp.router.platform #=> String
resp.router.software #=> String
resp.router.xslt_template_name #=> String
resp.router.xslt_template_name_for_mac_sec #=> String
resp.router.router_type_identifier #=> String
resp.virtual_interface_id #=> String
resp.virtual_interface_name #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface.

  • :router_type_identifier (String) —

    Identifies the router by a combination of vendor, platform, and software version. For example, ‘CiscoSystemsInc-2900SeriesRouters-IOS124`.

Returns:

See Also:



4029
4030
4031
4032
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4029

def describe_router_configuration(params = {}, options = {})
  req = build_request(:describe_router_configuration, params)
  req.send_request(options)
end

#describe_tags(params = {}) ⇒ Types::DescribeTagsResponse

Describes the tags associated with the specified Direct Connect resources.

Examples:

Request syntax with placeholder values


resp = client.describe_tags({
  resource_arns: ["ResourceArn"], # required
})

Response structure


resp.resource_tags #=> Array
resp.resource_tags[0].resource_arn #=> String
resp.resource_tags[0].tags #=> Array
resp.resource_tags[0].tags[0].key #=> String
resp.resource_tags[0].tags[0].value #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :resource_arns (required, Array<String>) —

    The Amazon Resource Names (ARNs) of the resources.

Returns:

See Also:



4062
4063
4064
4065
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4062

def describe_tags(params = {}, options = {})
  req = build_request(:describe_tags, params)
  req.send_request(options)
end

#describe_virtual_gateways(params = {}) ⇒ Types::VirtualGateways

<note markdown=“1”> Deprecated. Use ‘DescribeVpnGateways` instead. See

DescribeVPNGateways][1

in the *Amazon Elastic Compute Cloud API

Reference*.

</note>

Lists the virtual private gateways owned by the Amazon Web Services account.

You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.

[1]: docs.aws.amazon.com/AWSEC2/latest/APIReference/API_DescribeVpnGateways.html

Examples:

Response structure


resp.virtual_gateways #=> Array
resp.virtual_gateways[0].virtual_gateway_id #=> String
resp.virtual_gateways[0].virtual_gateway_state #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Returns:

See Also:



4097
4098
4099
4100
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4097

def describe_virtual_gateways(params = {}, options = {})
  req = build_request(:describe_virtual_gateways, params)
  req.send_request(options)
end

#describe_virtual_interfaces(params = {}) ⇒ Types::VirtualInterfaces

Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.

A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.

Examples:

Request syntax with placeholder values


resp = client.describe_virtual_interfaces({
  connection_id: "ConnectionId",
  virtual_interface_id: "VirtualInterfaceId",
})

Response structure


resp.virtual_interfaces #=> Array
resp.virtual_interfaces[0]. #=> String
resp.virtual_interfaces[0].virtual_interface_id #=> String
resp.virtual_interfaces[0].location #=> String
resp.virtual_interfaces[0].connection_id #=> String
resp.virtual_interfaces[0].virtual_interface_type #=> String
resp.virtual_interfaces[0].virtual_interface_name #=> String
resp.virtual_interfaces[0].vlan #=> Integer
resp.virtual_interfaces[0].asn #=> Integer
resp.virtual_interfaces[0].amazon_side_asn #=> Integer
resp.virtual_interfaces[0].auth_key #=> String
resp.virtual_interfaces[0].amazon_address #=> String
resp.virtual_interfaces[0].customer_address #=> String
resp.virtual_interfaces[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interfaces[0].virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.virtual_interfaces[0].customer_router_config #=> String
resp.virtual_interfaces[0].mtu #=> Integer
resp.virtual_interfaces[0].jumbo_frame_capable #=> Boolean
resp.virtual_interfaces[0].virtual_gateway_id #=> String
resp.virtual_interfaces[0].direct_connect_gateway_id #=> String
resp.virtual_interfaces[0].route_filter_prefixes #=> Array
resp.virtual_interfaces[0].route_filter_prefixes[0].cidr #=> String
resp.virtual_interfaces[0].bgp_peers #=> Array
resp.virtual_interfaces[0].bgp_peers[0].bgp_peer_id #=> String
resp.virtual_interfaces[0].bgp_peers[0].asn #=> Integer
resp.virtual_interfaces[0].bgp_peers[0].auth_key #=> String
resp.virtual_interfaces[0].bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interfaces[0].bgp_peers[0].amazon_address #=> String
resp.virtual_interfaces[0].bgp_peers[0].customer_address #=> String
resp.virtual_interfaces[0].bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.virtual_interfaces[0].bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.virtual_interfaces[0].bgp_peers[0].aws_device_v2 #=> String
resp.virtual_interfaces[0].bgp_peers[0].aws_logical_device_id #=> String
resp.virtual_interfaces[0].region #=> String
resp.virtual_interfaces[0].aws_device_v2 #=> String
resp.virtual_interfaces[0].aws_logical_device_id #=> String
resp.virtual_interfaces[0].tags #=> Array
resp.virtual_interfaces[0].tags[0].key #=> String
resp.virtual_interfaces[0].tags[0].value #=> String
resp.virtual_interfaces[0].site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (String) —

    The ID of the connection.

  • :virtual_interface_id (String) —

    The ID of the virtual interface.

Returns:

See Also:



4176
4177
4178
4179
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4176

def describe_virtual_interfaces(params = {}, options = {})
  req = build_request(:describe_virtual_interfaces, params)
  req.send_request(options)
end

#disassociate_connection_from_lag(params = {}) ⇒ Types::Connection

Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.

If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it’s the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.

Examples:

Request syntax with placeholder values


resp = client.disassociate_connection_from_lag({
  connection_id: "ConnectionId", # required
  lag_id: "LagId", # required
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the connection.

  • :lag_id (required, String) —

    The ID of the LAG.

Returns:

See Also:



4268
4269
4270
4271
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4268

def disassociate_connection_from_lag(params = {}, options = {})
  req = build_request(:disassociate_connection_from_lag, params)
  req.send_request(options)
end

#disassociate_mac_sec_key(params = {}) ⇒ Types::DisassociateMacSecKeyResponse

Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.

Examples:

Request syntax with placeholder values


resp = client.disassociate_mac_sec_key({
  connection_id: "ConnectionId", # required
  secret_arn: "SecretARN", # required
})

Response structure


resp.connection_id #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

    You can use DescribeConnections or DescribeLags to retrieve connection ID.

  • :secret_arn (required, String) —

    The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.

    You can use DescribeConnections to retrieve the ARN of the MAC Security (MACsec) secret key.

Returns:

See Also:



4315
4316
4317
4318
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4315

def disassociate_mac_sec_key(params = {}, options = {})
  req = build_request(:disassociate_mac_sec_key, params)
  req.send_request(options)
end

#list_virtual_interface_test_history(params = {}) ⇒ Types::ListVirtualInterfaceTestHistoryResponse

Lists the virtual interface failover test history.

Examples:

Request syntax with placeholder values


resp = client.list_virtual_interface_test_history({
  test_id: "TestId",
  virtual_interface_id: "VirtualInterfaceId",
  bgp_peers: ["BGPPeerId"],
  status: "FailureTestHistoryStatus",
  max_results: 1,
  next_token: "PaginationToken",
})

Response structure


resp.virtual_interface_test_history #=> Array
resp.virtual_interface_test_history[0].test_id #=> String
resp.virtual_interface_test_history[0].virtual_interface_id #=> String
resp.virtual_interface_test_history[0].bgp_peers #=> Array
resp.virtual_interface_test_history[0].bgp_peers[0] #=> String
resp.virtual_interface_test_history[0].status #=> String
resp.virtual_interface_test_history[0]. #=> String
resp.virtual_interface_test_history[0].test_duration_in_minutes #=> Integer
resp.virtual_interface_test_history[0].start_time #=> Time
resp.virtual_interface_test_history[0].end_time #=> Time
resp.next_token #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :test_id (String) —

    The ID of the virtual interface failover test.

  • :virtual_interface_id (String) —

    The ID of the virtual interface that was tested.

  • :bgp_peers (Array<String>) —

    The BGP peers that were placed in the DOWN state during the virtual interface failover test.

  • :status (String) —

    The status of the virtual interface failover test.

  • :max_results (Integer) —

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned ‘nextToken` value.

    If ‘MaxResults` is given a value larger than 100, only 100 results are returned.

  • :next_token (String) —

    The token for the next page of results.

Returns:

See Also:



4380
4381
4382
4383
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4380

def list_virtual_interface_test_history(params = {}, options = {})
  req = build_request(:list_virtual_interface_test_history, params)
  req.send_request(options)
end

#start_bgp_failover_test(params = {}) ⇒ Types::StartBgpFailoverTestResponse

Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.

You can run the test on public, private, transit, and hosted virtual interfaces.

You can use [ListVirtualInterfaceTestHistory] to view the virtual interface test history.

If you need to stop the test before the test interval completes, use [StopBgpFailoverTest].

[1]: docs.aws.amazon.com/directconnect/latest/APIReference/API_ListVirtualInterfaceTestHistory.html [2]: docs.aws.amazon.com/directconnect/latest/APIReference/API_StopBgpFailoverTest.html

Examples:

Request syntax with placeholder values


resp = client.start_bgp_failover_test({
  virtual_interface_id: "VirtualInterfaceId", # required
  bgp_peers: ["BGPPeerId"],
  test_duration_in_minutes: 1,
})

Response structure


resp.virtual_interface_test.test_id #=> String
resp.virtual_interface_test.virtual_interface_id #=> String
resp.virtual_interface_test.bgp_peers #=> Array
resp.virtual_interface_test.bgp_peers[0] #=> String
resp.virtual_interface_test.status #=> String
resp.virtual_interface_test. #=> String
resp.virtual_interface_test.test_duration_in_minutes #=> Integer
resp.virtual_interface_test.start_time #=> Time
resp.virtual_interface_test.end_time #=> Time

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface you want to test.

  • :bgp_peers (Array<String>) —

    The BGP peers to place in the DOWN state.

  • :test_duration_in_minutes (Integer) —

    The time in minutes that the virtual interface failover test will last.

    Maximum value: 4,320 minutes (72 hours).

    Default: 180 minutes (3 hours).

Returns:

See Also:



4446
4447
4448
4449
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4446

def start_bgp_failover_test(params = {}, options = {})
  req = build_request(:start_bgp_failover_test, params)
  req.send_request(options)
end

#stop_bgp_failover_test(params = {}) ⇒ Types::StopBgpFailoverTestResponse

Stops the virtual interface failover test.

Examples:

Request syntax with placeholder values


resp = client.stop_bgp_failover_test({
  virtual_interface_id: "VirtualInterfaceId", # required
})

Response structure


resp.virtual_interface_test.test_id #=> String
resp.virtual_interface_test.virtual_interface_id #=> String
resp.virtual_interface_test.bgp_peers #=> Array
resp.virtual_interface_test.bgp_peers[0] #=> String
resp.virtual_interface_test.status #=> String
resp.virtual_interface_test. #=> String
resp.virtual_interface_test.test_duration_in_minutes #=> Integer
resp.virtual_interface_test.start_time #=> Time
resp.virtual_interface_test.end_time #=> Time

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual interface you no longer want to test.

Returns:

See Also:



4482
4483
4484
4485
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4482

def stop_bgp_failover_test(params = {}, options = {})
  req = build_request(:stop_bgp_failover_test, params)
  req.send_request(options)
end

#tag_resource(params = {}) ⇒ Struct

Adds the specified tags to the specified Direct Connect resource. Each resource can have a maximum of 50 tags.

Each tag consists of a key and an optional value. If a tag with the same key is already associated with the resource, this action updates its value.

Examples:

Request syntax with placeholder values


resp = client.tag_resource({
  resource_arn: "ResourceArn", # required
  tags: [ # required
    {
      key: "TagKey", # required
      value: "TagValue",
    },
  ],
})

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :resource_arn (required, String) —

    The Amazon Resource Name (ARN) of the resource.

  • :tags (required, Array<Types::Tag>) —

    The tags to add.

Returns:

  • (Struct) —

    Returns an empty response.

See Also:



4518
4519
4520
4521
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4518

def tag_resource(params = {}, options = {})
  req = build_request(:tag_resource, params)
  req.send_request(options)
end

#untag_resource(params = {}) ⇒ Struct

Removes one or more tags from the specified Direct Connect resource.

Examples:

Request syntax with placeholder values


resp = client.untag_resource({
  resource_arn: "ResourceArn", # required
  tag_keys: ["TagKey"], # required
})

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :resource_arn (required, String) —

    The Amazon Resource Name (ARN) of the resource.

  • :tag_keys (required, Array<String>) —

    The tag keys of the tags to remove.

Returns:

  • (Struct) —

    Returns an empty response.

See Also:



4544
4545
4546
4547
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4544

def untag_resource(params = {}, options = {})
  req = build_request(:untag_resource, params)
  req.send_request(options)
end

#update_connection(params = {}) ⇒ Types::Connection

Updates the Direct Connect dedicated connection configuration.

You can update the following parameters for a connection:

  • The connection name

  • The connection’s MAC Security (MACsec) encryption mode.

Examples:

Request syntax with placeholder values


resp = client.update_connection({
  connection_id: "ConnectionId", # required
  connection_name: "ConnectionName",
  encryption_mode: "EncryptionMode",
})

Response structure


resp. #=> String
resp.connection_id #=> String
resp.connection_name #=> String
resp.connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.region #=> String
resp.location #=> String
resp.bandwidth #=> String
resp.vlan #=> Integer
resp.partner_name #=> String
resp.loa_issue_time #=> Time
resp.lag_id #=> String
resp.aws_device #=> String
resp.jumbo_frame_capable #=> Boolean
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.port_encryption_status #=> String
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :connection_id (required, String) —

    The ID of the dedicated connection.

    You can use DescribeConnections to retrieve the connection ID.

  • :connection_name (String) —

    The name of the connection.

  • :encryption_mode (String) —

    The connection MAC Security (MACsec) encryption mode.

    The valid values are ‘no_encrypt`, `should_encrypt`, and `must_encrypt`.

Returns:

See Also:



4639
4640
4641
4642
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4639

def update_connection(params = {}, options = {})
  req = build_request(:update_connection, params)
  req.send_request(options)
end

#update_direct_connect_gateway(params = {}) ⇒ Types::UpdateDirectConnectGatewayResponse

Updates the name of a current Direct Connect gateway.

Examples:

Request syntax with placeholder values


resp = client.update_direct_connect_gateway({
  direct_connect_gateway_id: "DirectConnectGatewayId", # required
  new_direct_connect_gateway_name: "DirectConnectGatewayName", # required
})

Response structure


resp.direct_connect_gateway.direct_connect_gateway_id #=> String
resp.direct_connect_gateway.direct_connect_gateway_name #=> String
resp.direct_connect_gateway.amazon_side_asn #=> Integer
resp.direct_connect_gateway. #=> String
resp.direct_connect_gateway.direct_connect_gateway_state #=> String, one of "pending", "available", "deleting", "deleted"
resp.direct_connect_gateway.state_change_error #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :direct_connect_gateway_id (required, String) —

    The ID of the Direct Connect gateway to update.

  • :new_direct_connect_gateway_name (required, String) —

    The new name for the Direct Connect gateway.

Returns:

See Also:



4676
4677
4678
4679
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4676

def update_direct_connect_gateway(params = {}, options = {})
  req = build_request(:update_direct_connect_gateway, params)
  req.send_request(options)
end

#update_direct_connect_gateway_association(params = {}) ⇒ Types::UpdateDirectConnectGatewayAssociationResult

Updates the specified attributes of the Direct Connect gateway association.

Add or remove prefixes from the association.

Examples:

Request syntax with placeholder values


resp = client.update_direct_connect_gateway_association({
  association_id: "DirectConnectGatewayAssociationId",
  add_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
  remove_allowed_prefixes_to_direct_connect_gateway: [
    {
      cidr: "CIDR",
    },
  ],
})

Response structure


resp.direct_connect_gateway_association.direct_connect_gateway_id #=> String
resp.direct_connect_gateway_association. #=> String
resp.direct_connect_gateway_association.association_state #=> String, one of "associating", "associated", "disassociating", "disassociated", "updating"
resp.direct_connect_gateway_association.state_change_error #=> String
resp.direct_connect_gateway_association.associated_gateway.id #=> String
resp.direct_connect_gateway_association.associated_gateway.type #=> String, one of "virtualPrivateGateway", "transitGateway"
resp.direct_connect_gateway_association.associated_gateway. #=> String
resp.direct_connect_gateway_association.associated_gateway.region #=> String
resp.direct_connect_gateway_association.association_id #=> String
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway #=> Array
resp.direct_connect_gateway_association.allowed_prefixes_to_direct_connect_gateway[0].cidr #=> String
resp.direct_connect_gateway_association.virtual_gateway_id #=> String
resp.direct_connect_gateway_association.virtual_gateway_region #=> String
resp.direct_connect_gateway_association. #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :association_id (String) —

    The ID of the Direct Connect gateway association.

  • :add_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    The Amazon VPC prefixes to advertise to the Direct Connect gateway.

  • :remove_allowed_prefixes_to_direct_connect_gateway (Array<Types::RouteFilterPrefix>) —

    The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.

Returns:

See Also:



4737
4738
4739
4740
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4737

def update_direct_connect_gateway_association(params = {}, options = {})
  req = build_request(:update_direct_connect_gateway_association, params)
  req.send_request(options)
end

#update_lag(params = {}) ⇒ Types::Lag

Updates the attributes of the specified link aggregation group (LAG).

You can update the following LAG attributes:

  • The name of the LAG.

  • The value for the minimum number of connections that must be operational for the LAG itself to be operational.

  • The LAG’s MACsec encryption mode.

    Amazon Web Services assigns this value to each connection which is part of the LAG.

  • The tags

<note markdown=“1”> If you adjust the threshold value for the minimum number of operational connections, ensure that the new value does not cause the LAG to fall below the threshold and become non-operational.

</note>

Examples:

Request syntax with placeholder values


resp = client.update_lag({
  lag_id: "LagId", # required
  lag_name: "LagName",
  minimum_links: 1,
  encryption_mode: "EncryptionMode",
})

Response structure


resp.connections_bandwidth #=> String
resp.number_of_connections #=> Integer
resp.lag_id #=> String
resp. #=> String
resp.lag_name #=> String
resp.lag_state #=> String, one of "requested", "pending", "available", "down", "deleting", "deleted", "unknown"
resp.location #=> String
resp.region #=> String
resp.minimum_links #=> Integer
resp.aws_device #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.connections #=> Array
resp.connections[0]. #=> String
resp.connections[0].connection_id #=> String
resp.connections[0].connection_name #=> String
resp.connections[0].connection_state #=> String, one of "ordering", "requested", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.connections[0].region #=> String
resp.connections[0].location #=> String
resp.connections[0].bandwidth #=> String
resp.connections[0].vlan #=> Integer
resp.connections[0].partner_name #=> String
resp.connections[0].loa_issue_time #=> Time
resp.connections[0].lag_id #=> String
resp.connections[0].aws_device #=> String
resp.connections[0].jumbo_frame_capable #=> Boolean
resp.connections[0].aws_device_v2 #=> String
resp.connections[0].aws_logical_device_id #=> String
resp.connections[0].has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.connections[0].tags #=> Array
resp.connections[0].tags[0].key #=> String
resp.connections[0].tags[0].value #=> String
resp.connections[0].provider_name #=> String
resp.connections[0].mac_sec_capable #=> Boolean
resp.connections[0].port_encryption_status #=> String
resp.connections[0].encryption_mode #=> String
resp.connections[0].mac_sec_keys #=> Array
resp.connections[0].mac_sec_keys[0].secret_arn #=> String
resp.connections[0].mac_sec_keys[0].ckn #=> String
resp.connections[0].mac_sec_keys[0].state #=> String
resp.connections[0].mac_sec_keys[0].start_on #=> String
resp.allows_hosted_connections #=> Boolean
resp.jumbo_frame_capable #=> Boolean
resp.has_logical_redundancy #=> String, one of "unknown", "yes", "no"
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.provider_name #=> String
resp.mac_sec_capable #=> Boolean
resp.encryption_mode #=> String
resp.mac_sec_keys #=> Array
resp.mac_sec_keys[0].secret_arn #=> String
resp.mac_sec_keys[0].ckn #=> String
resp.mac_sec_keys[0].state #=> String
resp.mac_sec_keys[0].start_on #=> String

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :lag_id (required, String) —

    The ID of the LAG.

  • :lag_name (String) —

    The name of the LAG.

  • :minimum_links (Integer) —

    The minimum number of physical connections that must be operational for the LAG itself to be operational.

  • :encryption_mode (String) —

    The LAG MAC Security (MACsec) encryption mode.

    Amazon Web Services applies the value to all connections which are part of the LAG.

Returns:

See Also:



4875
4876
4877
4878
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4875

def update_lag(params = {}, options = {})
  req = build_request(:update_lag, params)
  req.send_request(options)
end

#update_virtual_interface_attributes(params = {}) ⇒ Types::VirtualInterface

Updates the specified attributes of the specified virtual private interface.

Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn’t updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.

Examples:

Request syntax with placeholder values


resp = client.update_virtual_interface_attributes({
  virtual_interface_id: "VirtualInterfaceId", # required
  mtu: 1,
  enable_site_link: false,
  virtual_interface_name: "VirtualInterfaceName",
})

Response structure


resp. #=> String
resp.virtual_interface_id #=> String
resp.location #=> String
resp.connection_id #=> String
resp.virtual_interface_type #=> String
resp.virtual_interface_name #=> String
resp.vlan #=> Integer
resp.asn #=> Integer
resp.amazon_side_asn #=> Integer
resp.auth_key #=> String
resp.amazon_address #=> String
resp.customer_address #=> String
resp.address_family #=> String, one of "ipv4", "ipv6"
resp.virtual_interface_state #=> String, one of "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown"
resp.customer_router_config #=> String
resp.mtu #=> Integer
resp.jumbo_frame_capable #=> Boolean
resp.virtual_gateway_id #=> String
resp.direct_connect_gateway_id #=> String
resp.route_filter_prefixes #=> Array
resp.route_filter_prefixes[0].cidr #=> String
resp.bgp_peers #=> Array
resp.bgp_peers[0].bgp_peer_id #=> String
resp.bgp_peers[0].asn #=> Integer
resp.bgp_peers[0].auth_key #=> String
resp.bgp_peers[0].address_family #=> String, one of "ipv4", "ipv6"
resp.bgp_peers[0].amazon_address #=> String
resp.bgp_peers[0].customer_address #=> String
resp.bgp_peers[0].bgp_peer_state #=> String, one of "verifying", "pending", "available", "deleting", "deleted"
resp.bgp_peers[0].bgp_status #=> String, one of "up", "down", "unknown"
resp.bgp_peers[0].aws_device_v2 #=> String
resp.bgp_peers[0].aws_logical_device_id #=> String
resp.region #=> String
resp.aws_device_v2 #=> String
resp.aws_logical_device_id #=> String
resp.tags #=> Array
resp.tags[0].key #=> String
resp.tags[0].value #=> String
resp.site_link_enabled #=> Boolean

Parameters:

  • params (Hash) (defaults to: {}) —

    ({})

Options Hash (params):

  • :virtual_interface_id (required, String) —

    The ID of the virtual private interface.

  • :mtu (Integer) —

    The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.

  • :enable_site_link (Boolean) —

    Indicates whether to enable or disable SiteLink.

  • :virtual_interface_name (String) —

    The name of the virtual private interface.

Returns:

See Also:



4989
4990
4991
4992
 
# File 'lib/aws-sdk-directconnect/client.rb', line 4989

def update_virtual_interface_attributes(params = {}, options = {})
  req = build_request(:update_virtual_interface_attributes, params)
  req.send_request(options)
end

#waiter_names ⇒ Object

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.

Deprecated. 


5018
5019
5020
 
# File 'lib/aws-sdk-directconnect/client.rb', line 5018

def waiter_names
  []
end