Gem Version CI Code Quality Code Coverage Online docs

Fault-tolerance tools for ruby based on circuit-breakers.

Without Faulty

External dependencies like APIs can start failing at any time When they do, it could cause cascading failures in your application.

# The application will always try to execute this even if the API
# fails repeatedly

With Faulty

Faulty monitors errors inside this block and will "trip" a circuit if your threshold is passed. Once a circuit is tripped, Faulty stops executing this block until it recovers. Your application can detect external failures, and prevent their effects from degrading overall performance.

users = Faulty.circuit('api').try_run do

  # If this raises an exception, it counts towards the failure rate
  # The exceptions that count as failures are configurable
  # All failures will be sent to your event listeners for monitoring

# Here we return a stubbed value so the app can continue to function
# Another strategy is just to re-raise the exception so the app can handle it
# or use its default error handler

See What is this for? for a more detailed explanation. Also see "Release It!: Design and Deploy Production-Ready Software" by Michael T. Nygard and the Martin Fowler Article post on circuit breakers.



Add it to your Gemfile:

gem 'faulty'

Or install it manually:

gem install faulty

During your app startup, call Faulty.init. For Rails, you would do this in config/initializers/faulty.rb. See Setup for details.

API Docs

API docs can be read on rubydoc.info, inline in the source code, or you can generate them yourself with Ruby yard:


Then open doc/index.html in your browser.


Use the default configuration options:


Or specify your own configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Redis.new

  config.listeners << Faulty::Events::CallbackListener.new do |events|
    events.circuit_open do |payload|
      puts 'Circuit was opened'

Or use a faulty instance instead for an object-oriented approach

faulty = Faulty.new do
  config.storage = Faulty::Storage::Redis.new

For a full list of configuration options, see the Configuration section.

Basic Usage

To create a circuit, call Faulty.circuit. This can be done as you use the circuit, or you can set it up beforehand. Any options passed to the circuit method are synchronized across threads and saved as long as the process is alive.

circuit1 = Faulty.circuit(:api, rate_threshold: 0.6)

# The options from above are also used when called here
circuit2 = Faulty.circuit(:api)
circuit2.options.rate_threshold == 0.6 # => true

# The same circuit is returned on each consecutive call
circuit1.equal?(circuit2) # => true

To run a circuit, call the run method:

Faulty.circuit(:api).run do

See How it Works for more details about how Faulty handles circuit failures.

If the run block above fails, a Faulty::CircuitError will be raised. It is up to your application to handle that error however necessary or crash. Often though, you don't want to crash your application when a circuit fails, but instead apply a fallback or default behavior. For this, Faulty provides the try_run method:

result = Faulty.circuit(:api).try_run do

users = if result.ok?

The try_run method returns a result type instead of raising errors. See the API docs for Result for more information. Here we use it to check whether the result is ok? (not an error). If it is we set the users variable, otherwise we set a default of an empty array. This pattern is so common, that Result also implements a helper method or_default to do the same thing:

users = Faulty.circuit(:api).try_run do

If you want to globally wrap your core dependencies, like your cache or database, you may want to look at Patches, which can automatically wrap your connections in a Faulty circuit.

See Running a Circuit for more in-depth examples. Also, make sure you have proper Event Handlers setup so that you can monitor your circuits for failures.

What is this for?

Circuit breakers are a fault-tolerance tool for creating separation between your application and external dependencies. For example, your application may call an external API to send a text message:


In normal operation, this API call is very fast. However what if the texting service started hanging? Your application would quickly use up a lot of resources waiting for requests to return from the service. You could consider adding a timeout to your request:

TextApi.send(message, timeout: 5)

Now your application will terminate requests after 5 seconds, but that could still add up to a lot of resources if you call this thousands of times. Circuit breakers solve this problem.

Faulty.circuit('text_api').run do
  TextApi.send(message, timeout: 5)

Now, when the text API hangs, the first few will run and start timing out. This will trip the circuit. After the circuit trips (see How it Works), calls to the text API will be paused for the configured cool down period. Your application resources are not overwhelmed.

You are free to implement a fallback or error handling however you wish, for example, in this case, you might add the text message to a failure queue:

Faulty.circuit('text_api').run do
  TextApi.send(message, timeout: 5)
rescue Faulty::CircuitError => e


Faulty can be configured with the following configuration options. This example illustrates the default values. In the first example, we configure Faulty globally. The second example shows the same configuration using an instance of Faulty instead of global configuration.

Faulty.init do |config|
  # The cache backend to use. By default, Faulty looks for a Rails cache. If
  # that's not available, it uses an ActiveSupport::Cache::Memory instance.
  # Otherwise, it uses a Faulty::Cache::Null and caching is disabled.
  # Whatever backend is given here is automatically wrapped in
  # Faulty::Cache::AutoWire. This adds fault-tolerance features, see the
  # AutoWire API docs for more details.
  config.cache = Faulty::Cache::Default.new

  # A hash of default options to be used when creating new Circuits.
  # See Circuit Options below for a full list of these
  config.circuit_defaults = {}

  # The storage backend. By default, Faulty uses an in-memory store. For most
  # production applications, you'll want a more robust backend. Faulty also
  # provides Faulty::Storage::Redis for this.
  # Whatever backend is given here is automatically wrapped in
  # Faulty::Storage::AutoWire. This adds fault-tolerance features, see the
  # AutoWire APi docs for more details. If an array of storage backends is
  # given, each one will be tried in order until one succeeds.
  config.storage = Faulty::Storage::Memory.new

  # An array of event listeners. Each object in the array should implement
  # Faulty::Events::ListenerInterface. For ad-hoc custom listeners, Faulty
  # provides Faulty::Events::CallbackListener.
  config.listeners = [Faulty::Events::LogListener.new]

  # The event notifier. For most use-cases, you don't need to change this,
  # However, Faulty allows substituting your own notifier if necessary.
  # If overridden, config.listeners will be ignored.
  config.notifier = Faulty::Events::Notifier.new(config.listeners)

Here is the same configuration using an instance of Faulty. This is a more object-oriented approach.

faulty = Faulty.new do |config|
  config.cache = Faulty::Cache::Default.new
  config.storage = Faulty::Storage::Memory.new
  config.listeners = [Faulty::Events::LogListener.new]
  config.notifier = Faulty::Events::Notifier.new(config.listeners)

Most of the examples in this README use the global Faulty class methods, but they work the same way when using an instance. Just substitute your instance instead of Faulty. There is no preferred way to use Faulty. Choose whichever configuration mechanism works best for your application. Also see Multiple Configurations if your application needs to set different options in different scenarios.

For all Faulty APIs that have configuration, you can also pass in an options hash. For example, Faulty.init could be called like this:

Faulty.init(cache: Faulty::Cache::Null.new)

Configuring the Storage Backend

A storage backend is required to use Faulty. By default, it uses in-memory storage, but Redis is also available, along with a number of wrappers used to improve resiliency and fault-tolerance.


The Faulty::Storage::Memory backend is the default storage backend. You may prefer this implementation if you want to avoid the complexity and potential failure-mode of cross-network circuit storage. The trade-off is that circuit state is only contained within a single process and will not be saved across application restarts. Locks will also be cleared on restart.

The default configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Memory.new do |storage|
    # The maximum number of circuit runs that will be stored
    storage.max_sample_size = 100


The Faulty::Storage::Redis backend provides distributed circuit storage using Redis. Although Faulty takes steps to reduce risk (See Fault Tolerance), using cross-network storage does introduce some additional failure modes. To reduce this risk, be sure to set conservative timeouts for your Redis connection. Setting high timeouts will print warnings to stderr.

The default configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Redis.new do |storage|
    # The Redis client. Accepts either a Redis instance, or a ConnectionPool
    # of Redis instances. A low timeout is highly recommended to prevent
    # cascading failures when evaluating circuits.
    storage.client = ::Redis.new(timeout: 1)

    # The prefix to prepend to all redis keys used by Faulty circuits
    storage.key_prefix = 'faulty'

    # A string to separate the parts of the redis key
    storage.key_separator = ':'

    # The maximum number of circuit runs that will be stored
    storage.max_sample_size = 100

    # The maximum number of seconds that a circuit run will be stored
    storage.sample_ttl = 1800

    # The maximum number of seconds to store a circuit. Does not apply to
    # locks, which are indefinite.
    storage.circuit_ttl = 604_800 # 1 Week

    # The number of seconds between circuit expirations. Changing this setting
    # is not recommended. See API docs for more implementation details.
    storage.list_granularity = 3600

    # If true, disables warnings about recommended client settings like timeouts
    storage.disable_warnings = false


The Faulty::Storage::FallbackChain backend is a wrapper for multiple prioritized storage backends. If the first backend in the chain fails, consecutive backends are tried until one succeeds. The recommended use-case for this is to fall back on reliable storage if a networked storage backend fails.

For example, you may configure Redis as your primary storage backend, with an in-memory storage backend as a fallback:

Faulty.init do |config|
  config.storage = Faulty::Storage::FallbackChain.new([

Faulty instances will automatically use a fallback chain if an array is given to the storage option, so this example is equivalent to the above:

Faulty.init do |config|
  config.storage = [

If the fallback chain fails-over to backup storage, circuit states will not carry over, so failover could be temporarily disruptive to your application. However, any calls to #lock or #unlock will always be persisted to all backends so that locks are maintained during failover.


This wrapper is applied to all non-fault-tolerant storage backends by default (see the API docs for Faulty::Storage::AutoWire).

Faulty::Storage::FaultTolerantProxy is a wrapper that suppresses storage errors and returns sensible defaults during failures. If a storage backend is failing, all circuits will be treated as closed regardless of locks or previous history.

If you wish your application to use a secondary storage backend instead of failing closed, use FallbackChain.


This wrapper is applied to all non-fault-tolerant storage backends by default (see the API docs for Faulty::Storage::AutoWire).

Faulty::Storage::CircuitProxy is a wrapper that uses an independent in-memory circuit to track failures to storage backends. If a storage backend fails continuously, it will be temporarily disabled and raise Faulty::CircuitErrors.

Typically this is used inside a FaultTolerantProxy or FallbackChain so that these storage failures are handled gracefully.

Configuring the Cache Backend


The Faulty::Cache::Null cache disables caching. It is the default if Rails and ActiveSupport are not present.


Faulty::Cache::Rails is the default cache if Rails or ActiveSupport are present. If Rails is present, it uses Rails.cache as the backend. If ActiveSupport is present, but Rails is not, it creates a new ActiveSupport::Cache::MemoryStore by default. This backend can be used with any ActiveSupport::Cache.

Faulty.init do |config|
  config.cache = Faulty::Cache::Rails.new(


This wrapper is applied to all non-fault-tolerant cache backends by default (see the API docs for Faulty::Cache::AutoWire).

Faulty::Cache::FaultTolerantProxy is a wrapper that suppresses cache errors and acts like a null cache during failures. Reads always return nil, and writes are no-ops.


This wrapper is applied to all non-fault-tolerant circuit backends by default (see the API docs for Faulty::Circuit::AutoWire).

Faulty::Cache::CircuitProxy is a wrapper that uses an independent in-memory circuit to track failures to cache backends. If a cache backend fails continuously, it will be temporarily disabled and raise Faulty::CircuitErrors.

Typically this is used inside a FaultTolerantProxy so that these cache failures are handled gracefully.

Multiple Configurations

It is possible to have multiple configurations of Faulty running within the same process. The most common setup is to simply use Faulty.init to configure Faulty globally, however it is possible to have additional configurations.

The default instance

When you call Faulty.init, you are actually creating the default instance of Faulty. You can access this instance directly by calling Faulty.default.

# We create the default instance

# Access the default instance
faulty = Faulty.default

# Alternatively, access the instance by name
faulty = Faulty[:default]

You can rename the default instance if desired:


instance = Faulty.default
instance = Faulty[:custom_default]

Multiple Instances

If you want multiple instance, but want global, thread-safe access to them, you can use Faulty.register:

api_faulty = Faulty.new do |config|
  # This accepts the same options as Faulty.init

Faulty.register(:api, api_faulty)

# Now access the instance globally

When you call Faulty.circuit, that's the same as calling Faulty.default.circuit, so you can apply the same principal to any other registered Faulty instance:

Faulty[:api].circuit('api_circuit').run { 'ok' }

You can also create and register a Faulty instance in one step:

Faulty.register(:api) do |config|
  # This accepts the same options as Faulty.init

Standalone Instances

If you choose, you can use Faulty instances without registering them globally by simply calling Faulty.new. This is more object-oriented and is necessary if you use dependency injection.

faulty = Faulty.new

Calling #circuit on the instance still has the same memoization behavior that Faulty.circuit has, so subsequent runs for the same circuit will use a memoized circuit object.

Working with circuits

A circuit can be created by calling the #circuit method on Faulty, or on your Faulty instance:

# With global Faulty configuration
circuit = Faulty.circuit('api')

# Or with a Faulty instance
circuit = faulty.circuit('api')

Running a Circuit

You can handle circuit errors either with exceptions, or with a Faulty Result. They both have the same behavior, but you can choose whatever syntax is more convenient for your use-case.

With Exceptions

If we want exceptions to be raised, we use the #run method. This does not suppress exceptions, only monitors them. If api.users raises an exception here, it will bubble up to the caller. The exception will be a sub-class of Faulty::CircuitError, and the error cause will be the original error object.

  Faulty.circuit('api').run do
rescue Faulty::CircuitError => e
  e.cause # The original error

With Faulty::Result

Sometimes exception handling is awkward to deal with, and could cause a lot of extra boilerplate code. In simple cases, it's can be more concise to allow Faulty to capture exceptions. Use the #try_run method for this.

  result = Faulty.circuit('api').try_run do

The result variable is an instance of Faulty::Result. A result can either be an error if the circuit failed, or an "ok" value if it succeeded.

You can check whether it's an error with the ok? or error? method.

if result.ok?
  users = result.get
  error = result.error

Sometimes you want your application to crash when a circuit fails, but other times, you might want to return a default or fallback value. The Result object has a method #or_default to do that.

# Users will be nil if the result is an error
users = result.or_default

# Users will be an empty array if the result is an error
users = result.or_default([])

# Users will be the return value of the block
users = result.or_default do
  # ...

As we showed in the Basic Usage section, you can put this together in a nice one-liner.

Faulty.circuit('api').try_run { api.users }.or_default([])

Specifying the Captured Errors

By default, Faulty circuits will capture all StandardError errors, but sometimes you might not want every error to count as a circuit failure. For example, an HTTP 404 Not Found response typically should not cause a circuit to fail. You can customize the errors that Faulty captures

Faulty.circuit('api', errors: [Net::HTTPServerException]).run do
  # If this raises any exception other than Net::HTTPServerException
  # Faulty will not capture it at all, and it will not count as a circuit failure

Or, if you'd instead like to specify errors to be excluded:

Faulty.circuit('api', exclude: [Net::HTTPClientException]).run do
  # If this raises a Net::HTTPClientException, Faulty will not capture it

Both options can even be specified together.

  errors: [ActiveRecord::ActiveRecordError],
  exclude: [ActiveRecord::RecordNotFound, ActiveRecord::RecordNotUnique]
).run do
  # This only captures ActiveRecord::ActiveRecordError errors, but not
  # ActiveRecord::RecordNotFound or ActiveRecord::RecordNotUnique errors
  user = User.find(3)

Using the Cache

Circuit runs can be given a cache key, and if they are, the result of the circuit block will be cached. Calls to that circuit block will try to fetch from the cache, and only execute the block if the cache misses.

Faulty.circuit('api').run(cache: 'all_users') do

The cache will be refreshed (meaning the circuit will be allowed to execute) after cache_refreshes_after (default 900 second). However, the value remains stored in the cache for cache_expires_in (default 86400 seconds, 1 day). If the circuit fails, the last cached value will be returned even if cache_refreshes_after has passed.

See the Caching section for more details on Faulty's caching strategy.

Configuring the Circuit Threshold

To configure how a circuit responds to error, use the cool_down, rate_threshold and sample_threshold options.

Rate Threshold

The first option to look at is rate_threshold. This specifies the percentage of circuit runs that must fail before a circuit is opened.

# This circuit must fail 70% of the time before the circuit will be tripped
Faulty.circuit('api', rate_threshold: 0.7).run { api.users }

Sample Threshold

We typically don't want circuits to trip immediately if the first execution fails. This is why we have the sample_threshold option. The circuit will never be tripped until we record at least this number of executions.

# This circuit must run 10 times before it is allowed to trip. Those 10 runs
# can be successes or fails. If at least 70% of them are failures, the circuit
# will be opened.
Faulty.circuit('api', sample_threshold: 10, rate_threshold: 0.7).run { api.users }

Cool Down

The cool_down option specifies how much time to wait after a circuit is opened. During this period, the circuit will not be executed. After the cool down elapses, the circuit enters the "half open" state, and execution can be retried. See How it Works.

# If this circuit trips, it will skip executions for 120 seconds before retrying
Faulty.circuit('api', cool_down: 120).run { api.users }

Circuit Options

A circuit can be created with the following configuration options. Those options are only set once, synchronized across threads, and will persist in-memory until the process exits. If you're using multiple configurations, the options are retained within the context of each instance. All options given after the first call to Faulty.circuit (or Faulty#circuit) are ignored.

Faulty.circuit('api', rate_threshold: 0.7).run { api.call }

# These options are ignored since with already initialized the circuit
circuit = Faulty.circuit('api', rate_threshold: 0.3)
circuit.options.rate_threshold # => 0.7

This is because the circuit objects themselves are internally memoized, and are read-only once they are run.

The following example represents the defaults for a new circuit:

Faulty.circuit('api') do |config|
  # The cache backend for this circuit. Inherits the global cache by default.
  config.cache = Faulty.options.cache

  # The number of seconds before a cache entry is expired. After this time, the
  # cache entry may be fully deleted. If set to nil, the cache will not expire.
  config.cache_expires_in = 86400

  # The number of seconds before a cache entry should be refreshed. See the
  # Caching section for more detail. A value of nil disables cache refreshing.
  config.cache_refreshes_after = 900

  # The number of seconds to add or subtract from cache_refreshes_after
  # when determining whether a cache entry should be refreshed. Helps mitigate
  # the "thundering herd" effect
  config.cache_refresh_jitter = 0.2 * config.cache_refreshes_after

  # After a circuit is opened, the number of seconds to wait before moving the
  # circuit to half-open.
  config.cool_down = 300

  # The number of seconds of history that is considered when calculating
  # the circuit failure rate. The length of the sliding window.
  config.evaluation_window = 60

  # The errors that will be captured by Faulty and used to trigger circuit
  # state changes.
  config.errors = [StandardError]

  # Errors that should be ignored by Faulty and not captured.
  config.exclude = []

  # The event notifier. Inherits the Faulty instance notifier by default
  config.notifier = Faulty.options.notifier

  # The minimum failure rate required to trip a circuit
  config.rate_threshold = 0.5

  # The minimum number of runs required before a circuit can trip
  config.sample_threshold = 3

  # The storage backend for this circuit. Inherits the Faulty instance storage
  # by default
  config.storage = Faulty.options.storage

Following the same convention as Faulty.init, circuits can also be created with an options hash:

Faulty.circuit(:api, cache_expires_in: 1800)

Listing Circuits

For monitoring or debugging, you may need to retrieve a list of all circuit names. This is possible with Faulty.list_circuits (or Faulty#list_circuits if you're using an instance).

You can get a list of all circuit statuses by mapping those names to their status objects. Be careful though, since this could cause performance issues for very large numbers of circuits.

statuses = Faulty.list_circuits.map do |name|

Locking Circuits

It is possible to lock a circuit open or closed. A circuit that is locked open will never execute its block, and always raise an Faulty::OpenCircuitError. This is useful in cases where you need to manually disable a dependency entirely. If a cached value is available, that will be returned from the circuit until it expires, even outside its refresh period.


A circuit that is locked closed will never trip. This is useful in cases where a circuit is continuously tripping incorrectly. If a cached value is available, it will have the same behavior as an unlocked circuit.


To remove a lock of either type:


Locking or unlocking a circuit has no concurrency guarantees, so it's not recommended to lock or unlock circuits from production code. Instead, locks are intended as an emergency tool for troubleshooting and debugging.


For certain core dependencies like a cache or a database connection, it is inconvenient to wrap every call in its own circuit. Faulty provides some patches to wrap these calls in a circuit automatically. To use a patch, it first needs to be loaded. Since patches modify third-party code, they are not automatically required with the Faulty gem, so they need to be required individually.

require 'faulty'
require 'faulty/patch/redis'

Or require them in your Gemfile

gem 'faulty', require: %w[faulty faulty/patch/redis]

For core dependencies you'll most likely want to use the in-memory circuit storage adapter and not the Redis storage adapter. That way if Redis fails, your circuit storage doesn't also fail, causing cascading failures.

For example, you can use a separate Faulty instance to manage your Mysql2 circuit:

# Setup your default config. This can use the Redis backend if you prefer
Faulty.init do |config|
  # ...

Faulty.register(:mysql) do |config|
  # Here we decide to set some circuit defaults more useful for
  # frequent database calls
  config.circuit_defaults = {
    cool_down: 20.0,
    evaluation_window: 40,
    sample_threshold: 25

# Now we can use our "mysql" faulty instance when constructing a Mysql2 client
Mysql2::Client.new(host: '', faulty: { instance: 'mysql2' })


Faulty::Patch::Redis protects a Redis client with an internal circuit. Pass a :faulty key along with your connection options to enable the circuit breaker.

The Redis patch supports the Redis gem versions 3 and up

require 'faulty/patch/redis'

# For Redis <= 4, pass faulty into the top-level connection options
redis = Redis.new(url: 'redis://localhost:6379', faulty: {
  # The name for the redis circuit
  name: 'redis'

  # The faulty instance to use
  # This can also be a registered faulty instance or a constant name. See API
  # docs for more details
  instance: Faulty.default

  # By default, circuit errors will be subclasses of Redis::BaseError
  # To disable this behavior, set patch_errors to false and Faulty
  # will raise its default errors
  patch_errors: true

# Or for Redis 5+, pass faulty into the custom connection options
redis = Redis.new(url: 'redis://localhost:6379', custom: { faulty: {
  # ...

redis.connect # raises Faulty::CircuitError if connection fails

# If the faulty key is not given, no circuit is used
redis = Redis.new(url: 'redis://localhost:6379')
redis.connect # not protected by a circuit


Faulty::Patch::Mysql2 protects a Mysql2::Client with an internal circuit. Pass a :faulty key along with your connection options to enable the circuit breaker.

Faulty supports the mysql2 gem versions 0.5 and greater.

Note: Although Faulty supports Ruby 2.3 in general, the Mysql2 patch is not fully supported on Ruby 2.3. It may work for you, but use it at your own risk.

require 'faulty/patch/mysql2'

mysql = Mysql2::Client.new(host: '', faulty: {
  # The name for the Mysql2 circuit
  name: 'mysql2'

  # The faulty instance to use
  # This can also be a registered faulty instance or a constant name. See API
  # docs for more details
  instance: Faulty.default

  # By default, circuit errors will be subclasses of
  # Mysql2::Error::ConnectionError
  # To disable this behavior, set patch_errors to false and Faulty
  # will raise its default errors
  patch_errors: true

mysql.query('SELECT * FROM users') # raises Faulty::CircuitError if connection fails

# If the faulty key is not given, no circuit is used
mysql = Mysql2::Client.new(host: '')
mysql.query('SELECT * FROM users') # not protected by a circuit


Faulty::Patch::Elasticsearch protects a Elasticsearch::Client with an internal circuit. Pass a :faulty key along with your client options to enable the circuit breaker.

require 'faulty/patch/elasticsearch'

es = Elasticsearch::Client.new(url: 'localhost:9200', faulty: {
  # The name for the Elasticsearch::Client circuit
  name: 'elasticsearch'

  # The faulty instance to use
  # This can also be a registered faulty instance or a constant name. See API
  # docs for more details
  instance: Faulty.default

  # By default, circuit errors will be subclasses of
  # Elasticsearch::Transport::Transport::Error
  # To disable this behavior, set patch_errors to false and Faulty
  # will raise its default errors
  patch_errors: true

If you're using Searchkick, you can configure Faulty with client_options.

Searchkick.client_options[:faulty] = { name: 'searchkick' }

Event Handling

Faulty uses an event-dispatching model to deliver notifications of internal events. The full list of events is available from Faulty::Events::EVENTS.

  • cache_failure - A cache backend raised an error. Payload: key, action, error
  • circuit_cache_hit - A circuit hit the cache. Payload: circuit, key
  • circuit_cache_miss - A circuit hit the cache. Payload: circuit, key
  • circuit_cache_write - A circuit wrote to the cache. Payload: circuit, key
  • circuit_closed - A circuit closed. Payload: circuit
  • circuit_failure - A circuit execution raised an error. Payload: circuit, status, error
  • circuit_opened - A circuit execution caused the circuit to open. Payload circuit, error
  • circuit_reopened - A circuit execution cause the circuit to reopen from half-open. Payload: circuit, error.
  • circuit_skipped - A circuit execution was skipped because the circuit is open. Payload: circuit
  • circuit_success - A circuit execution was successful. Payload: circuit
  • storage_failure - A storage backend raised an error. Payload circuit (can be nil), action, error

By default events are logged using Faulty::Events::LogListener, but that can be replaced, or additional listeners can be added.


The CallbackListener is useful for ad-hoc handling of events. You can specify an event handler by calling a method on the callback handler by the same name.

Faulty.init do |config|
  # Replace the default listener with a custom callback listener
  listener = Faulty::Events::CallbackListener.new do |events|
    events.circuit_opened do |payload|
      MyNotifier.alert("Circuit #{payload[:circuit].name} opened: #{payload[:error].message}")
  config.listeners = [listener]

Other Built-in Listeners

In addition to the log and callback listeners, Faulty intends to implement built-in service-specific handlers to make it easy to integrate with monitoring and reporting software.

If your favorite monitoring software is not supported here, please open a PR that implements a listener for it.

Custom Listeners

You can implement your own listener by following the documentation in Faulty::Events::ListenerInterface. For example:

class MyFaultyListener
  def handle(event, payload)
    MyNotifier.alert(event, payload)
Faulty.init do |config|
  config.listeners = [MyFaultyListener.new]

Disabling Faulty Globally

For testing or for some environments, you may wish to disable Faulty circuits at a global level.


This only affects the process where you run the #disable! method and it does not affect the stored state of circuits.

Faulty will still use the cache even when disabled. If you also want to disable the cache, configure Faulty to use a Faulty::Cache::Null cache.

Testing with Faulty

Depending on your application, you could choose to disable Faulty globally, but sometimes you may want to test your application's behavior in a failure scenario.

If you have such tests, you will want to prevent failures in one test from affecting other tests. To clear all circuit states between tests, use #clear!. For example, with rspec:

RSpec.configure do |config|
  config.after do

How it Works

Faulty implements a version of circuit breakers inspired by "Release It!: Design and Deploy Production-Ready Software" by Michael T. Nygard and Martin Fowler's post on the subject. A few notable features of Faulty's implementation are:

  • Rate-based failure thresholds
  • Integrated caching inspired by Netflix's Hystrix with automatic cache jitter and error fallback.
  • Event-based monitoring
  • Flexible fault-tolerant storage with optional fallbacks

Following the principals of the circuit-breaker pattern, the block given to run or try_run will always be executed as long as it never raises an error. If the block does raise an error, then the circuit keeps track of the number of runs and the failure rate.

Once both thresholds are breached, the circuit is opened. Once open, the circuit starts the cool-down period. Any executions within that cool-down are skipped, and a Faulty::OpenCircuitError will be raised.

After the cool-down has elapsed, the circuit enters the half-open state. In this state, Faulty allows a single execution of the block as a test run. If the test run succeeds, the circuit is fully closed and the circuit state is reset. If the test run fails, the circuit is opened and the cool-down is reset.

Each time the circuit changes state or executes the block, events are raised that are sent to the Faulty event notifier. The notifier should be used to track circuit failure rates, open circuits, etc.

In addition to the classic circuit breaker design, Faulty implements caching that is integrated with the circuit state. See Caching for more detail.


Faulty integrates caching into it's circuits in a way that is particularly suited to fault-tolerance. To make use of caching, you must specify the cache configuration option when initializing Faulty or creating a new Faulty instance. If you're using Rails, this is automatically set to the Rails cache.

Once your cache is configured, you can use the cache parameter when running a circuit to specify a cache key:

feed = Faulty.circuit('rss_feeds')
  .try_run(cache: "rss_feeds/#{feed}") do

By default a circuit has the following options:

  • cache_expires_in: 86400 (1 day). This is sent to the cache backend and defines how long the cache entry should be stored. After this time elapses, queries will result in a cache miss.
  • cache_refreshes_after: 900 (15 minutes). This is used internally by Faulty to indicate when a cache should be refreshed. It does not affect how long the cache entry is stored.
  • cache_refresh_jitter: 180 (3 minutes = 20% of cache_refreshes_after). The maximum number of seconds to randomly add or subtract from cache_refreshes_after when determining whether to refresh a cache entry. This mitigates the "thundering herd" effect caused by many processes simultaneously refreshing the cache.

This code will attempt to fetch an RSS feed protected by a circuit. If the feed is within the cache refresh period, then the result will be returned from the cache and the block will not be executed regardless of the circuit state.

If the cache is hit, but outside its refresh period, then Faulty will check the circuit state. If the circuit is closed or half-open, then it will run the block. If the block is successful, then it will update the circuit, write to the cache and return the new value.

However, if the cache is hit and the block fails, then that failure is noted in the circuit and Faulty returns the cached value.

If the circuit is open and the cache is hit, then Faulty will always return the cached value.

If the cache query results in a miss, then faulty operates as normal. In the code above, if the circuit is closed, the block will be executed. If the block succeeds, the cache is refreshed. If the block fails, the default of [] will be returned.

Fault Tolerance

Faulty backends are fault-tolerant by default. Any StandardErrors raised by the storage or cache backends are captured and suppressed. Failure events for these errors are sent to the notifier.

In case of a flaky storage or cache backend, Faulty also uses independent in-memory circuits to track failures so that we don't keep calling a backend that is failing. See the API docs for Cache::AutoWire, and Storage::AutoWire for more details.

If the storage backend fails, circuits will default to closed. If the cache backend fails, all cache queries will miss.

Implementing a Cache Backend

You can implement your own cache backend by following the documentation in Faulty::Cache::Interface. It is a fairly simple API, with only get/set methods. For example:

class MyFaultyCache
  def initialize(my_cache)
    @cache = my_cache

  def read(key)

  def write(key, value, expires_in: nil)
    @cache.write(key, value, expires_in)

  # Set this to false unless your cache never raises errors
  def fault_tolerant?

Feel free to open a pull request if your cache backend would be useful for other users.

Implementing a Storage Backend

You can implement your own storage backend by following the documentation in Faulty::Storage::Interface. Since the storage has some tricky requirements regarding concurrency, the Faulty::Storage::Memory can be used as a reference implementation. Feel free to open a pull request if your storage backend would be useful for other users.


Faulty has its own opinions about how to implement a circuit breaker in Ruby, but there are and have been many other options:

Currently Active

  • semian: A resiliency toolkit that includes circuit breakers. It auto-wires circuits for MySQL, Net::HTTP, and Redis. It has only in-memory storage by design. Its core components are written in C, which allows it to be faster than pure ruby.
  • circuitbox: Also uses a block syntax to manually define circuits. It uses Moneta to abstract circuit storage to allow any key-value store.

Previous Work

Faulty's Unique Features

  • Simple API but configurable for advanced users
  • Pluggable storage backends (circuitbox also has this)
  • Patches for common core dependencies (semian also has this)
  • Protected storage access with fallback to safe storage
  • Global, or object-oriented configuration with multiple instances
  • Integrated caching support tailored for fault-tolerance
  • Manually lock circuits open or closed