Class: Aws::WAFRegional::Client

Inherits:

Seahorse::Client::Base

Object
Seahorse::Client::Base
Aws::WAFRegional::Client

show all

Includes:: ClientStubs

Defined in:: lib/aws-sdk-wafregional/client.rb

Overview

An API client for WAFRegional. To construct a client, you need to configure a ‘:region` and `:credentials`.

client = Aws::WAFRegional::Client.new(
  region: region_name,
  credentials: credentials,
  # ...
)

For details on configuring region and credentials see the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).

See #initialize for a full list of supported configuration options.

Class Attribute Summary collapse

.identifier ⇒ Object readonly private

API Operations collapse

#associate_web_acl(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation.
#create_byte_match_set(params = {}) ⇒ Types::CreateByteMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_geo_match_set(params = {}) ⇒ Types::CreateGeoMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_ip_set(params = {}) ⇒ Types::CreateIPSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_rate_based_rule(params = {}) ⇒ Types::CreateRateBasedRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_regex_match_set(params = {}) ⇒ Types::CreateRegexMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_regex_pattern_set(params = {}) ⇒ Types::CreateRegexPatternSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_rule(params = {}) ⇒ Types::CreateRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_rule_group(params = {}) ⇒ Types::CreateRuleGroupResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_size_constraint_set(params = {}) ⇒ Types::CreateSizeConstraintSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_sql_injection_match_set(params = {}) ⇒ Types::CreateSqlInjectionMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_web_acl(params = {}) ⇒ Types::CreateWebACLResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#create_web_acl_migration_stack(params = {}) ⇒ Types::CreateWebACLMigrationStackResponse

Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket.
#create_xss_match_set(params = {}) ⇒ Types::CreateXssMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_byte_match_set(params = {}) ⇒ Types::DeleteByteMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_geo_match_set(params = {}) ⇒ Types::DeleteGeoMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_ip_set(params = {}) ⇒ Types::DeleteIPSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_logging_configuration(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_permission_policy(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_rate_based_rule(params = {}) ⇒ Types::DeleteRateBasedRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_regex_match_set(params = {}) ⇒ Types::DeleteRegexMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_regex_pattern_set(params = {}) ⇒ Types::DeleteRegexPatternSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_rule(params = {}) ⇒ Types::DeleteRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_rule_group(params = {}) ⇒ Types::DeleteRuleGroupResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_size_constraint_set(params = {}) ⇒ Types::DeleteSizeConstraintSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_sql_injection_match_set(params = {}) ⇒ Types::DeleteSqlInjectionMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_web_acl(params = {}) ⇒ Types::DeleteWebACLResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#delete_xss_match_set(params = {}) ⇒ Types::DeleteXssMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#disassociate_web_acl(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation.
#get_byte_match_set(params = {}) ⇒ Types::GetByteMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_change_token(params = {}) ⇒ Types::GetChangeTokenResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_change_token_status(params = {}) ⇒ Types::GetChangeTokenStatusResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_geo_match_set(params = {}) ⇒ Types::GetGeoMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_ip_set(params = {}) ⇒ Types::GetIPSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_logging_configuration(params = {}) ⇒ Types::GetLoggingConfigurationResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_permission_policy(params = {}) ⇒ Types::GetPermissionPolicyResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_rate_based_rule(params = {}) ⇒ Types::GetRateBasedRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_rate_based_rule_managed_keys(params = {}) ⇒ Types::GetRateBasedRuleManagedKeysResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_regex_match_set(params = {}) ⇒ Types::GetRegexMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_regex_pattern_set(params = {}) ⇒ Types::GetRegexPatternSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_rule(params = {}) ⇒ Types::GetRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_rule_group(params = {}) ⇒ Types::GetRuleGroupResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_sampled_requests(params = {}) ⇒ Types::GetSampledRequestsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_size_constraint_set(params = {}) ⇒ Types::GetSizeConstraintSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_sql_injection_match_set(params = {}) ⇒ Types::GetSqlInjectionMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_web_acl(params = {}) ⇒ Types::GetWebACLResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#get_web_acl_for_resource(params = {}) ⇒ Types::GetWebACLForResourceResponse

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation.
#get_xss_match_set(params = {}) ⇒ Types::GetXssMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_activated_rules_in_rule_group(params = {}) ⇒ Types::ListActivatedRulesInRuleGroupResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_byte_match_sets(params = {}) ⇒ Types::ListByteMatchSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_geo_match_sets(params = {}) ⇒ Types::ListGeoMatchSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_ip_sets(params = {}) ⇒ Types::ListIPSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_logging_configurations(params = {}) ⇒ Types::ListLoggingConfigurationsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_rate_based_rules(params = {}) ⇒ Types::ListRateBasedRulesResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_regex_match_sets(params = {}) ⇒ Types::ListRegexMatchSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_regex_pattern_sets(params = {}) ⇒ Types::ListRegexPatternSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_resources_for_web_acl(params = {}) ⇒ Types::ListResourcesForWebACLResponse

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation.
#list_rule_groups(params = {}) ⇒ Types::ListRuleGroupsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_rules(params = {}) ⇒ Types::ListRulesResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_size_constraint_sets(params = {}) ⇒ Types::ListSizeConstraintSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_sql_injection_match_sets(params = {}) ⇒ Types::ListSqlInjectionMatchSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_subscribed_rule_groups(params = {}) ⇒ Types::ListSubscribedRuleGroupsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_tags_for_resource(params = {}) ⇒ Types::ListTagsForResourceResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_web_acls(params = {}) ⇒ Types::ListWebACLsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#list_xss_match_sets(params = {}) ⇒ Types::ListXssMatchSetsResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#put_logging_configuration(params = {}) ⇒ Types::PutLoggingConfigurationResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#put_permission_policy(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#tag_resource(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#untag_resource(params = {}) ⇒ Struct

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_byte_match_set(params = {}) ⇒ Types::UpdateByteMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_geo_match_set(params = {}) ⇒ Types::UpdateGeoMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_ip_set(params = {}) ⇒ Types::UpdateIPSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_rate_based_rule(params = {}) ⇒ Types::UpdateRateBasedRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_regex_match_set(params = {}) ⇒ Types::UpdateRegexMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_regex_pattern_set(params = {}) ⇒ Types::UpdateRegexPatternSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_rule(params = {}) ⇒ Types::UpdateRuleResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_rule_group(params = {}) ⇒ Types::UpdateRuleGroupResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_size_constraint_set(params = {}) ⇒ Types::UpdateSizeConstraintSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_sql_injection_match_set(params = {}) ⇒ Types::UpdateSqlInjectionMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_web_acl(params = {}) ⇒ Types::UpdateWebACLResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.
#update_xss_match_set(params = {}) ⇒ Types::UpdateXssMatchSetResponse

<note markdown=“1”> This is **AWS WAF Classic** documentation.

Class Method Summary collapse

.errors_module ⇒ Object private

Instance Method Summary collapse

#build_request(operation_name, params = {}) ⇒ Object private
#initialize(options) ⇒ Client constructor

A new instance of Client.
#waiter_names ⇒ Object deprecated private Deprecated.

Constructor Details

#initialize(options) ⇒ `Client`

Returns a new instance of Client.

Parameters:

options (Hash)

Options Hash (options):

:plugins (Array<Seahorse::Client::Plugin>) — default: []] —

A list of plugins to apply to the client. Each plugin is either a class name or an instance of a plugin class.
:credentials (required, Aws::CredentialProvider) —
Your AWS credentials. This can be an instance of any one of the following classes:
- ‘Aws::Credentials` - Used for configuring static, non-refreshing credentials.
- ‘Aws::SharedCredentials` - Used for loading static credentials from a shared file, such as `~/.aws/config`.
- ‘Aws::AssumeRoleCredentials` - Used when you need to assume a role.
- ‘Aws::AssumeRoleWebIdentityCredentials` - Used when you need to assume a role after providing credentials via the web.
- ‘Aws::SSOCredentials` - Used for loading credentials from AWS SSO using an access token generated from `aws login`.
- ‘Aws::ProcessCredentials` - Used for loading credentials from a process that outputs to stdout.
- ‘Aws::InstanceProfileCredentials` - Used for loading credentials from an EC2 IMDS on an EC2 instance.
- ‘Aws::ECSCredentials` - Used for loading credentials from instances running in ECS.
- ‘Aws::CognitoIdentityCredentials` - Used for loading credentials from the Cognito Identity service.
When ‘:credentials` are not configured directly, the following locations will be searched for credentials:
- ‘Aws.config`
- The ‘:access_key_id`, `:secret_access_key`, and `:session_token` options.
- ENV, ENV
- ‘~/.aws/credentials`
- ‘~/.aws/config`
- EC2/ECS IMDS instance profile - When used by default, the timeouts are very aggressive. Construct and pass an instance of ‘Aws::InstanceProfileCredentails` or `Aws::ECSCredentials` to enable retries and extended timeouts. Instance profile credential fetching can be disabled by setting ENV to true.
:region (required, String) —
The AWS region to connect to. The configured ‘:region` is used to determine the service `:endpoint`. When not passed, a default `:region` is searched for in the following locations:
- ‘Aws.config`
- ‘ENV`
- ‘ENV`
- ‘ENV`
- ‘~/.aws/credentials`
- ‘~/.aws/config`
:access_key_id (String)
:active_endpoint_cache (Boolean) — default: false —

When set to ‘true`, a thread polling for endpoints will be running in the background every 60 secs (default). Defaults to `false`.
:adaptive_retry_wait_to_fill (Boolean) — default: true —

Used only in ‘adaptive` retry mode. When true, the request will sleep until there is sufficent client side capacity to retry the request. When false, the request will raise a `RetryCapacityNotAvailableError` and will not retry instead of sleeping.
:client_side_monitoring (Boolean) — default: false —

When ‘true`, client-side metrics will be collected for all API requests from this client.
:client_side_monitoring_client_id (String) — default: "" —

Allows you to provide an identifier for this client which will be attached to all generated client side metrics. Defaults to an empty string.
:client_side_monitoring_host (String) — default: "127.0.0.1" —

Allows you to specify the DNS hostname or IPv4 or IPv6 address that the client side monitoring agent is running on, where client metrics will be published via UDP.
:client_side_monitoring_port (Integer) — default: 31000 —

Required for publishing client metrics. The port that the client side monitoring agent is running on, where client metrics will be published via UDP.
:client_side_monitoring_publisher (Aws::ClientSideMonitoring::Publisher) — default: Aws::ClientSideMonitoring::Publisher —

Allows you to provide a custom client-side monitoring publisher class. By default, will use the Client Side Monitoring Agent Publisher.
:convert_params (Boolean) — default: true —

When ‘true`, an attempt is made to coerce request parameters into the required types.
:correct_clock_skew (Boolean) — default: true —

Used only in ‘standard` and adaptive retry modes. Specifies whether to apply a clock skew correction and retry requests with skewed client clocks.
:defaults_mode (String) — default: "legacy" —

See DefaultsModeConfiguration for a list of the accepted modes and the configuration defaults that are included.
:disable_host_prefix_injection (Boolean) — default: false —

Set to true to disable SDK automatically adding host prefix to default service endpoint when available.
:disable_request_compression (Boolean) — default: false —

When set to ‘true’ the request body will not be compressed for supported operations.
:endpoint (String, URI::HTTPS, URI::HTTP) —
Normally you should not configure the ‘:endpoint` option directly. This is normally constructed from the `:region` option. Configuring `:endpoint` is normally reserved for connecting to test or custom endpoints. The endpoint should be a URI formatted like:
```
'http://example.com'
'https://example.com'
'http://example.com:123'
```
:endpoint_cache_max_entries (Integer) — default: 1000 —

Used for the maximum size limit of the LRU cache storing endpoints data for endpoint discovery enabled operations. Defaults to 1000.
:endpoint_cache_max_threads (Integer) — default: 10 —

Used for the maximum threads in use for polling endpoints to be cached, defaults to 10.
:endpoint_cache_poll_interval (Integer) — default: 60 —

When :endpoint_discovery and :active_endpoint_cache is enabled, Use this option to config the time interval in seconds for making requests fetching endpoints information. Defaults to 60 sec.
:endpoint_discovery (Boolean) — default: false —

When set to ‘true`, endpoint discovery will be enabled for operations when available.
:ignore_configured_endpoint_urls (Boolean) —

Setting to true disables use of endpoint URLs provided via environment variables and the shared configuration file.
:log_formatter (Aws::Log::Formatter) — default: Aws::Log::Formatter.default —

The log formatter.
:log_level (Symbol) — default: :info —

The log level to send messages to the ‘:logger` at.
:logger (Logger) —

The Logger instance to send log messages to. If this option is not set, logging will be disabled.
:max_attempts (Integer) — default: 3 —

An integer representing the maximum number attempts that will be made for a single request, including the initial attempt. For example, setting this value to 5 will result in a request being retried up to 4 times. Used in ‘standard` and `adaptive` retry modes.
:profile (String) — default: "default" —

Used when loading credentials from the shared credentials file at HOME/.aws/credentials. When not specified, ‘default’ is used.
:request_min_compression_size_bytes (Integer) — default: 10240 —

The minimum size in bytes that triggers compression for request bodies. The value must be non-negative integer value between 0 and 10485780 bytes inclusive.
:retry_backoff (Proc) —

A proc or lambda used for backoff. Defaults to 2**retries * retry_base_delay. This option is only used in the ‘legacy` retry mode.
:retry_base_delay (Float) — default: 0.3 —

The base delay in seconds used by the default backoff function. This option is only used in the ‘legacy` retry mode.
:retry_jitter (Symbol) — default: :none —

A delay randomiser function used by the default backoff function. Some predefined functions can be referenced by name - :none, :equal, :full, otherwise a Proc that takes and returns a number. This option is only used in the ‘legacy` retry mode.

@see www.awsarchitectureblog.com/2015/03/backoff.html
:retry_limit (Integer) — default: 3 —

The maximum number of times to retry failed requests. Only ~ 500 level server errors and certain ~ 400 level client errors are retried. Generally, these are throttling errors, data checksum errors, networking errors, timeout errors, auth errors, endpoint discovery, and errors from expired credentials. This option is only used in the ‘legacy` retry mode.
:retry_max_delay (Integer) — default: 0 —

The maximum number of seconds to delay between retries (0 for no limit) used by the default backoff function. This option is only used in the ‘legacy` retry mode.
:retry_mode (String) — default: "legacy" —
Specifies which retry algorithm to use. Values are:
- ‘legacy` - The pre-existing retry behavior. This is default value if no retry mode is provided.
- ‘standard` - A standardized set of retry rules across the AWS SDKs. This includes support for retry quotas, which limit the number of unsuccessful retries a client can make.
- ‘adaptive` - An experimental retry mode that includes all the functionality of `standard` mode along with automatic client side throttling. This is a provisional mode that may change behavior in the future.
:sdk_ua_app_id (String) —

A unique and opaque application ID that is appended to the User-Agent header as app/sdk_ua_app_id. It should have a maximum length of 50. This variable is sourced from environment variable AWS_SDK_UA_APP_ID or the shared config profile attribute sdk_ua_app_id.
:secret_access_key (String)
:session_token (String)
:sigv4a_signing_region_set (Array) —
A list of regions that should be signed with SigV4a signing. When not passed, a default ‘:sigv4a_signing_region_set` is searched for in the following locations:
- ‘Aws.config`
- ‘ENV`
- ‘~/.aws/config`
:simple_json (Boolean) — default: false —

Disables request parameter conversion, validation, and formatting. Also disables response data type conversions. The request parameters hash must be formatted exactly as the API expects.This option is useful when you want to ensure the highest level of performance by avoiding overhead of walking request parameters and response data structures.
:stub_responses (Boolean) — default: false —

Causes the client to return stubbed responses. By default fake responses are generated and returned. You can specify the response data to return or errors to raise by calling ClientStubs#stub_responses. See ClientStubs for more information.

** Please note ** When response stubbing is enabled, no HTTP requests are made, and retries are disabled.
:telemetry_provider (Aws::Telemetry::TelemetryProviderBase) — default: Aws::Telemetry::NoOpTelemetryProvider —
Allows you to provide a telemetry provider, which is used to emit telemetry data. By default, uses ‘NoOpTelemetryProvider` which will not record or emit any telemetry data. The SDK supports the following telemetry providers:
- OpenTelemetry (OTel) - To use the OTel provider, install and require the
‘opentelemetry-sdk` gem and then, pass in an instance of a `Aws::Telemetry::OTelProvider` for telemetry provider.
:token_provider (Aws::TokenProvider) —
A Bearer Token Provider. This can be an instance of any one of the following classes:
- ‘Aws::StaticTokenProvider` - Used for configuring static, non-refreshing tokens.
- ‘Aws::SSOTokenProvider` - Used for loading tokens from AWS SSO using an access token generated from `aws login`.
When ‘:token_provider` is not configured directly, the `Aws::TokenProviderChain` will be used to search for tokens configured for your profile in shared configuration files.
:use_dualstack_endpoint (Boolean) —

When set to ‘true`, dualstack enabled endpoints (with `.aws` TLD) will be used if available.
:use_fips_endpoint (Boolean) —

When set to ‘true`, fips compatible endpoints will be used if available. When a `fips` region is used, the region is normalized and this config is set to `true`.
:validate_params (Boolean) — default: true —

When ‘true`, request parameters are validated before sending the request.
:endpoint_provider (Aws::WAFRegional::EndpointProvider) —

The endpoint provider used to resolve endpoints. Any object that responds to ‘#resolve_endpoint(parameters)` where `parameters` is a Struct similar to `Aws::WAFRegional::EndpointParameters`
:http_continue_timeout (Float) — default: 1 —

The number of seconds to wait for a 100-continue response before sending the request body. This option has no effect unless the request has “Expect” header set to “100-continue”. Defaults to ‘nil` which disables this behaviour. This value can safely be set per request on the session.
:http_idle_timeout (Float) — default: 5 —

The number of seconds a connection is allowed to sit idle before it is considered stale. Stale connections are closed and removed from the pool before making a request.
:http_open_timeout (Float) — default: 15 —

The default number of seconds to wait for response data. This value can safely be set per-request on the session.
:http_proxy (URI::HTTP, String) —

A proxy to send requests through. Formatted like ‘proxy.com:123’.
:http_read_timeout (Float) — default: 60 —

The default number of seconds to wait for response data. This value can safely be set per-request on the session.
:http_wire_trace (Boolean) — default: false —

When ‘true`, HTTP debug output will be sent to the `:logger`.
:on_chunk_received (Proc) —

When a Proc object is provided, it will be used as callback when each chunk of the response body is received. It provides three arguments: the chunk, the number of bytes received, and the total number of bytes in the response (or nil if the server did not send a ‘content-length`).
:on_chunk_sent (Proc) —

When a Proc object is provided, it will be used as callback when each chunk of the request body is sent. It provides three arguments: the chunk, the number of bytes read from the body, and the total number of bytes in the body.
:raise_response_errors (Boolean) — default: true —

When ‘true`, response errors are raised.
:ssl_ca_bundle (String) —

Full path to the SSL certificate authority bundle file that should be used when verifying peer certificates. If you do not pass ‘:ssl_ca_bundle` or `:ssl_ca_directory` the the system default will be used if available.
:ssl_ca_directory (String) —

Full path of the directory that contains the unbundled SSL certificate authority files for verifying peer certificates. If you do not pass ‘:ssl_ca_bundle` or `:ssl_ca_directory` the the system default will be used if available.
:ssl_ca_store (String) —

Sets the X509::Store to verify peer certificate.
:ssl_timeout (Float) —

Sets the SSL timeout in seconds
:ssl_verify_peer (Boolean) — default: true —

When ‘true`, SSL peer certificates are verified when establishing a connection.



441
442
443

# File 'lib/aws-sdk-wafregional/client.rb', line 441

def initialize(*args)
  super
end

Class Attribute Details

.identifier ⇒ `Object` (readonly)

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.



7001
7002
7003

# File 'lib/aws-sdk-wafregional/client.rb', line 7001

def identifier
  @identifier
end

Class Method Details

.errors_module ⇒ `Object`

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.



7004
7005
7006

# File 'lib/aws-sdk-wafregional/client.rb', line 7004

def errors_module
  Errors
end

Instance Method Details

#associate_web_acl(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation. For more information, see [AWS WAF Classic] in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Associates a web ACL with a resource, either an application load balancer or Amazon API Gateway stage.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.associate_web_acl({
  web_acl_id: "ResourceId", # required
  resource_arn: "ResourceArn", # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

A unique identifier (ID) for the web ACL.
:resource_arn (required, String) —
The ARN (Amazon Resource Name) of the resource to be protected, either an application load balancer or Amazon API Gateway stage.

The ARN should be in one of the following formats:
- For an Application Load Balancer: ‘arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id `
- For an Amazon API Gateway stage: ‘arn:aws:apigateway:region::/restapis/api-id/stages/stage-name `

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 493

def associate_web_acl(params = {}, options = {})
  req = build_request(:associate_web_acl, params)
  req.send_request(options)
end

#build_request(operation_name, params = {}) ⇒ `Object`

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.

Parameters:

params ({}) (defaults to: {})

# File 'lib/aws-sdk-wafregional/client.rb', line 6974

def build_request(operation_name, params = {})
  handlers = @handlers.for(operation_name)
  tracer = config.telemetry_provider.tracer_provider.tracer(
    Aws::Telemetry.module_to_tracer_name('Aws::WAFRegional')
  )
  context = Seahorse::Client::RequestContext.new(
    operation_name: operation_name,
    operation: config.api.operation(operation_name),
    client: self,
    params: params,
    config: config,
    tracer: tracer
  )
  context[:gem_name] = 'aws-sdk-wafregional'
  context[:gem_version] = '1.69.0'
  Seahorse::Client::Request.new(handlers, context)
end

#create_byte_match_set(params = {}) ⇒ `Types::CreateByteMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘ByteMatchSet`. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the `User-Agent` header or the query string. For example, you can create a `ByteMatchSet` that matches any requests with `User-Agent` headers that contain the string `BadBot`. You can then configure AWS WAF to reject those requests.

To create and configure a ‘ByteMatchSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateByteMatchSet` request.
Submit a ‘CreateByteMatchSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an `UpdateByteMatchSet` request.
Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_byte_match_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.byte_match_set.byte_match_set_id #=> String
resp.byte_match_set.name #=> String
resp.byte_match_set.byte_match_tuples #=> Array
resp.byte_match_set.byte_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.byte_match_set.byte_match_tuples[0].field_to_match.data #=> String
resp.byte_match_set.byte_match_tuples[0].target_string #=> String
resp.byte_match_set.byte_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.byte_match_set.byte_match_tuples[0].positional_constraint #=> String, one of "EXACTLY", "STARTS_WITH", "ENDS_WITH", "CONTAINS", "CONTAINS_WORD"
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the ByteMatchSet. You can’t change ‘Name` after you create a `ByteMatchSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateByteMatchSetResponse) —
Returns a response object which responds to the following methods:
- #byte_match_set => Types::ByteMatchSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 572

def create_byte_match_set(params = {}, options = {})
  req = build_request(:create_byte_match_set, params)
  req.send_request(options)
end

#create_geo_match_set(params = {}) ⇒ `Types::CreateGeoMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you’re receiving a lot of requests from one or more countries and you want to block the requests, you can create an ‘GeoMatchSet` that contains those countries and then configure AWS WAF to block the requests.

To create and configure a ‘GeoMatchSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateGeoMatchSet` request.
Submit a ‘CreateGeoMatchSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateGeoMatchSet request.
Submit an ‘UpdateGeoMatchSetSet` request to specify the countries that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_geo_match_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.geo_match_set.geo_match_set_id #=> String
resp.geo_match_set.name #=> String
resp.geo_match_set.geo_match_constraints #=> Array
resp.geo_match_set.geo_match_constraints[0].type #=> String, one of "Country"
resp.geo_match_set.geo_match_constraints[0].value #=> String, one of "AF", "AX", "AL", "DZ", "AS", "AD", "AO", "AI", "AQ", "AG", "AR", "AM", "AW", "AU", "AT", "AZ", "BS", "BH", "BD", "BB", "BY", "BE", "BZ", "BJ", "BM", "BT", "BO", "BQ", "BA", "BW", "BV", "BR", "IO", "BN", "BG", "BF", "BI", "KH", "CM", "CA", "CV", "KY", "CF", "TD", "CL", "CN", "CX", "CC", "CO", "KM", "CG", "CD", "CK", "CR", "CI", "HR", "CU", "CW", "CY", "CZ", "DK", "DJ", "DM", "DO", "EC", "EG", "SV", "GQ", "ER", "EE", "ET", "FK", "FO", "FJ", "FI", "FR", "GF", "PF", "TF", "GA", "GM", "GE", "DE", "GH", "GI", "GR", "GL", "GD", "GP", "GU", "GT", "GG", "GN", "GW", "GY", "HT", "HM", "VA", "HN", "HK", "HU", "IS", "IN", "ID", "IR", "IQ", "IE", "IM", "IL", "IT", "JM", "JP", "JE", "JO", "KZ", "KE", "KI", "KP", "KR", "KW", "KG", "LA", "LV", "LB", "LS", "LR", "LY", "LI", "LT", "LU", "MO", "MK", "MG", "MW", "MY", "MV", "ML", "MT", "MH", "MQ", "MR", "MU", "YT", "MX", "FM", "MD", "MC", "MN", "ME", "MS", "MA", "MZ", "MM", "NA", "NR", "NP", "NL", "NC", "NZ", "NI", "NE", "NG", "NU", "NF", "MP", "NO", "OM", "PK", "PW", "PS", "PA", "PG", "PY", "PE", "PH", "PN", "PL", "PT", "PR", "QA", "RE", "RO", "RU", "RW", "BL", "SH", "KN", "LC", "MF", "PM", "VC", "WS", "SM", "ST", "SA", "SN", "RS", "SC", "SL", "SG", "SX", "SK", "SI", "SB", "SO", "ZA", "GS", "SS", "ES", "LK", "SD", "SR", "SJ", "SZ", "SE", "CH", "SY", "TW", "TJ", "TZ", "TH", "TL", "TG", "TK", "TO", "TT", "TN", "TR", "TM", "TC", "TV", "UG", "UA", "AE", "GB", "US", "UM", "UY", "UZ", "VU", "VE", "VN", "VG", "VI", "WF", "EH", "YE", "ZM", "ZW"
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the GeoMatchSet. You can’t change ‘Name` after you create the `GeoMatchSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateGeoMatchSetResponse) —
Returns a response object which responds to the following methods:
- #geo_match_set => Types::GeoMatchSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 647

def create_geo_match_set(params = {}, options = {})
  req = build_request(:create_geo_match_set, params)
  req.send_request(options)
end

#create_ip_set(params = {}) ⇒ `Types::CreateIPSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you’re receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an ‘IPSet` that contains those IP addresses and then configure AWS WAF to block the requests.

To create and configure an ‘IPSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateIPSet` request.
Submit a ‘CreateIPSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateIPSet request.
Submit an ‘UpdateIPSet` request to specify the IP addresses that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create an IP set


# The following example creates an IP match set named MyIPSetFriendlyName.

resp = client.create_ip_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  name: "MyIPSetFriendlyName", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  ip_set: {
    ip_set_descriptors: [
      {
        type: "IPV4", 
        value: "192.0.2.44/32", 
      }, 
    ], 
    ip_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    name: "MyIPSetFriendlyName", 
  }, 
}

Request syntax with placeholder values


resp = client.create_ip_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.ip_set.ip_set_id #=> String
resp.ip_set.name #=> String
resp.ip_set.ip_set_descriptors #=> Array
resp.ip_set.ip_set_descriptors[0].type #=> String, one of "IPV4", "IPV6"
resp.ip_set.ip_set_descriptors[0].value #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the IPSet. You can’t change ‘Name` after you create the `IPSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateIPSetResponse) —
Returns a response object which responds to the following methods:
- #ip_set => Types::IPSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 748

def create_ip_set(params = {}, options = {})
  req = build_request(:create_ip_set, params)
  req.send_request(options)
end

#create_rate_based_rule(params = {}) ⇒ `Types::CreateRateBasedRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a RateBasedRule. The ‘RateBasedRule` contains a `RateLimit`, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The `RateBasedRule` also contains the `IPSet` objects, `ByteMatchSet` objects, and other predicates that identify the requests that you want to count or block if these requests exceed the `RateLimit`.

If you add more than one predicate to a ‘RateBasedRule`, a request not only must exceed the `RateLimit`, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to a `RateBasedRule`:

An ‘IPSet` that matches the IP address `192.0.2.44/32`
A ‘ByteMatchSet` that matches `BadBot` in the `User-Agent` header

Further, you specify a ‘RateLimit` of 1,000.

You then add the ‘RateBasedRule` to a `WebACL` and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the `User-Agent` header in the request must contain the value `BadBot`. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests.

As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a ‘RateBasedRule`:

A ‘ByteMatchSet` with `FieldToMatch` of `URI`
A ‘PositionalConstraint` of `STARTS_WITH`
A ‘TargetString` of `login`

Further, you specify a ‘RateLimit` of 1,000.

By adding this ‘RateBasedRule` to a `WebACL`, you could limit requests to your login page without affecting the rest of your site.

To create and configure a ‘RateBasedRule`, perform the following steps:

Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateRule` request.
Submit a ‘CreateRateBasedRule` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateRule request.
Submit an ‘UpdateRateBasedRule` request to specify the predicates that you want to include in the rule.
Create and update a ‘WebACL` that contains the `RateBasedRule`. For more information, see CreateWebACL.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_rate_based_rule({
  name: "ResourceName", # required
  metric_name: "MetricName", # required
  rate_key: "IP", # required, accepts IP
  rate_limit: 1, # required
  change_token: "ChangeToken", # required
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue", # required
    },
  ],
})

Response structure


resp.rule.rule_id #=> String
resp.rule.name #=> String
resp.rule.metric_name #=> String
resp.rule.match_predicates #=> Array
resp.rule.match_predicates[0].negated #=> Boolean
resp.rule.match_predicates[0].type #=> String, one of "IPMatch", "ByteMatch", "SqlInjectionMatch", "GeoMatch", "SizeConstraint", "XssMatch", "RegexMatch"
resp.rule.match_predicates[0].data_id #=> String
resp.rule.rate_key #=> String, one of "IP"
resp.rule.rate_limit #=> Integer
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the RateBasedRule. You can’t change the name of a ‘RateBasedRule` after you create it.
:metric_name (required, String) —

A friendly name or description for the metrics for this ‘RateBasedRule`. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change the name of the metric after you create the ‘RateBasedRule`.
:rate_key (required, String) —

The field that AWS WAF uses to determine if requests are likely arriving from a single source and thus subject to rate monitoring. The only valid value for ‘RateKey` is `IP`. `IP` indicates that requests that arrive from the same IP address are subject to the `RateLimit` that is specified in the `RateBasedRule`.
:rate_limit (required, Integer) —

The maximum number of requests, which have an identical value in the field that is specified by ‘RateKey`, allowed in a five-minute period. If the number of requests exceeds the `RateLimit` and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.
:change_token (required, String) —

The ‘ChangeToken` that you used to submit the `CreateRateBasedRule` request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.
:tags (Array<Types::Tag>)

Returns:

(Types::CreateRateBasedRuleResponse) —
Returns a response object which responds to the following methods:
- #rule => Types::RateBasedRule
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 906

def create_rate_based_rule(params = {}, options = {})
  req = build_request(:create_rate_based_rule, params)
  req.send_request(options)
end

#create_regex_match_set(params = {}) ⇒ `Types::CreateRegexMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the ‘User-Agent` header or the query string. For example, you can create a `RegexMatchSet` that contains a `RegexMatchTuple` that looks for any requests with `User-Agent` headers that match a `RegexPatternSet` with pattern `B[a@]dBt`. You can then configure AWS WAF to reject those requests.

To create and configure a ‘RegexMatchSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateRegexMatchSet` request.
Submit a ‘CreateRegexMatchSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an `UpdateRegexMatchSet` request.
Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a ‘RegexPatternSet`, that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_regex_match_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.regex_match_set.regex_match_set_id #=> String
resp.regex_match_set.name #=> String
resp.regex_match_set.regex_match_tuples #=> Array
resp.regex_match_set.regex_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.regex_match_set.regex_match_tuples[0].field_to_match.data #=> String
resp.regex_match_set.regex_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.regex_match_set.regex_match_tuples[0].regex_pattern_set_id #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the RegexMatchSet. You can’t change ‘Name` after you create a `RegexMatchSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateRegexMatchSetResponse) —
Returns a response object which responds to the following methods:
- #regex_match_set => Types::RegexMatchSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 987

def create_regex_match_set(params = {}, options = {})
  req = build_request(:create_regex_match_set, params)
  req.send_request(options)
end

#create_regex_pattern_set(params = {}) ⇒ `Types::CreateRegexPatternSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘RegexPatternSet`. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such as `B[a@]dBt`. You can then configure AWS WAF to reject those requests.

To create and configure a ‘RegexPatternSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateRegexPatternSet` request.
Submit a ‘CreateRegexPatternSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an `UpdateRegexPatternSet` request.
Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_regex_pattern_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.regex_pattern_set.regex_pattern_set_id #=> String
resp.regex_pattern_set.name #=> String
resp.regex_pattern_set.regex_pattern_strings #=> Array
resp.regex_pattern_set.regex_pattern_strings[0] #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the RegexPatternSet. You can’t change ‘Name` after you create a `RegexPatternSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateRegexPatternSetResponse) —
Returns a response object which responds to the following methods:
- #regex_pattern_set => Types::RegexPatternSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1060

def create_regex_pattern_set(params = {}, options = {})
  req = build_request(:create_regex_pattern_set, params)
  req.send_request(options)
end

#create_rule(params = {}) ⇒ `Types::CreateRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘Rule`, which contains the `IPSet` objects, `ByteMatchSet` objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to a `Rule`, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to a `Rule`:

An ‘IPSet` that matches the IP address `192.0.2.44/32`
A ‘ByteMatchSet` that matches `BadBot` in the `User-Agent` header

You then add the ‘Rule` to a `WebACL` and specify that you want to blocks requests that satisfy the `Rule`. For a request to be blocked, it must come from the IP address 192.0.2.44 and the `User-Agent` header in the request must contain the value `BadBot`.

To create and configure a ‘Rule`, perform the following steps:

Create and update the predicates that you want to include in the ‘Rule`. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateRule` request.
Submit a ‘CreateRule` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateRule request.
Submit an ‘UpdateRule` request to specify the predicates that you want to include in the `Rule`.
Create and update a ‘WebACL` that contains the `Rule`. For more information, see CreateWebACL.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create a rule


# The following example creates a rule named WAFByteHeaderRule.

resp = client.create_rule({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  metric_name: "WAFByteHeaderRule", 
  name: "WAFByteHeaderRule", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  rule: {
    metric_name: "WAFByteHeaderRule", 
    name: "WAFByteHeaderRule", 
    predicates: [
      {
        data_id: "MyByteMatchSetID", 
        negated: false, 
        type: "ByteMatch", 
      }, 
    ], 
    rule_id: "WAFRule-1-Example", 
  }, 
}

Request syntax with placeholder values


resp = client.create_rule({
  name: "ResourceName", # required
  metric_name: "MetricName", # required
  change_token: "ChangeToken", # required
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue", # required
    },
  ],
})

Response structure


resp.rule.rule_id #=> String
resp.rule.name #=> String
resp.rule.metric_name #=> String
resp.rule.predicates #=> Array
resp.rule.predicates[0].negated #=> Boolean
resp.rule.predicates[0].type #=> String, one of "IPMatch", "ByteMatch", "SqlInjectionMatch", "GeoMatch", "SizeConstraint", "XssMatch", "RegexMatch"
resp.rule.predicates[0].data_id #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the Rule. You can’t change the name of a ‘Rule` after you create it.
:metric_name (required, String) —

A friendly name or description for the metrics for this ‘Rule`. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change the name of the metric after you create the ‘Rule`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:tags (Array<Types::Tag>)

Returns:

(Types::CreateRuleResponse) —
Returns a response object which responds to the following methods:
- #rule => Types::Rule
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1197

def create_rule(params = {}, options = {})
  req = build_request(:create_rule, params)
  req.send_request(options)
end

#create_rule_group(params = {}) ⇒ `Types::CreateRuleGroupResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘RuleGroup`. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group.

Rule groups are subject to the following limits:

Three rule groups per account. You can request an increase to this limit by contacting customer support.
One rule group per web ACL.
Ten rules per rule group.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.create_rule_group({
  name: "ResourceName", # required
  metric_name: "MetricName", # required
  change_token: "ChangeToken", # required
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue", # required
    },
  ],
})

Response structure


resp.rule_group.rule_group_id #=> String
resp.rule_group.name #=> String
resp.rule_group.metric_name #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the RuleGroup. You can’t change ‘Name` after you create a `RuleGroup`.
:metric_name (required, String) —

A friendly name or description for the metrics for this ‘RuleGroup`. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change the name of the metric after you create the ‘RuleGroup`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:tags (Array<Types::Tag>)

Returns:

(Types::CreateRuleGroupResponse) —
Returns a response object which responds to the following methods:
- #rule_group => Types::RuleGroup
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1280

def create_rule_group(params = {}, options = {})
  req = build_request(:create_rule_group, params)
  req.send_request(options)
end

#create_size_constraint_set(params = {}) ⇒ `Types::CreateSizeConstraintSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘SizeConstraintSet`. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of the `User-Agent` header or the length of the query string. For example, you can create a `SizeConstraintSet` that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests.

To create and configure a ‘SizeConstraintSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateSizeConstraintSet` request.
Submit a ‘CreateSizeConstraintSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an `UpdateSizeConstraintSet` request.
Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create a size constraint


# The following example creates size constraint set named MySampleSizeConstraintSet.

resp = client.create_size_constraint_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  name: "MySampleSizeConstraintSet", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  size_constraint_set: {
    name: "MySampleSizeConstraintSet", 
    size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    size_constraints: [
      {
        comparison_operator: "GT", 
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        size: 0, 
        text_transformation: "NONE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.create_size_constraint_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.size_constraint_set.size_constraint_set_id #=> String
resp.size_constraint_set.name #=> String
resp.size_constraint_set.size_constraints #=> Array
resp.size_constraint_set.size_constraints[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.size_constraint_set.size_constraints[0].field_to_match.data #=> String
resp.size_constraint_set.size_constraints[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.size_constraint_set.size_constraints[0].comparison_operator #=> String, one of "EQ", "NE", "LE", "LT", "GE", "GT"
resp.size_constraint_set.size_constraints[0].size #=> Integer
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the SizeConstraintSet. You can’t change ‘Name` after you create a `SizeConstraintSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateSizeConstraintSetResponse) —
Returns a response object which responds to the following methods:
- #size_constraint_set => Types::SizeConstraintSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1391

def create_size_constraint_set(params = {}, options = {})
  req = build_request(:create_size_constraint_set, params)
  req.send_request(options)
end

#create_sql_injection_match_set(params = {}) ⇒ `Types::CreateSqlInjectionMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a SqlInjectionMatchSet, which you use to allow, block, or count requests that contain snippets of SQL code in a specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.

To create and configure a ‘SqlInjectionMatchSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateSqlInjectionMatchSet` request.
Submit a ‘CreateSqlInjectionMatchSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateSqlInjectionMatchSet request.
Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests in which you want to allow, block, or count malicious SQL code.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create a SQL injection match set


# The following example creates a SQL injection match set named MySQLInjectionMatchSet.

resp = client.create_sql_injection_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  name: "MySQLInjectionMatchSet", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  sql_injection_match_set: {
    name: "MySQLInjectionMatchSet", 
    sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    sql_injection_match_tuples: [
      {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.create_sql_injection_match_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.sql_injection_match_set.sql_injection_match_set_id #=> String
resp.sql_injection_match_set.name #=> String
resp.sql_injection_match_set.sql_injection_match_tuples #=> Array
resp.sql_injection_match_set.sql_injection_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.sql_injection_match_set.sql_injection_match_tuples[0].field_to_match.data #=> String
resp.sql_injection_match_set.sql_injection_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description for the SqlInjectionMatchSet that you’re creating. You can’t change ‘Name` after you create the `SqlInjectionMatchSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateSqlInjectionMatchSetResponse) —
Returns a response object which responds to the following methods:
- #sql_injection_match_set => Types::SqlInjectionMatchSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1496

def create_sql_injection_match_set(params = {}, options = {})
  req = build_request(:create_sql_injection_match_set, params)
  req.send_request(options)
end

#create_web_acl(params = {}) ⇒ `Types::CreateWebACLResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates a ‘WebACL`, which contains the `Rules` that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates `Rules` in order based on the value of `Priority` for each `Rule`.

You also specify a default action, either ‘ALLOW` or `BLOCK`. If a web request doesn’t match any of the ‘Rules` in a `WebACL`, AWS WAF responds to the request with the default action.

To create and configure a ‘WebACL`, perform the following steps:

Create and update the ‘ByteMatchSet` objects and other predicates that you want to include in `Rules`. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.
Create and update the ‘Rules` that you want to include in the `WebACL`. For more information, see CreateRule and UpdateRule.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateWebACL` request.
Submit a ‘CreateWebACL` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateWebACL request.
Submit an UpdateWebACL request to specify the ‘Rules` that you want to include in the `WebACL`, to specify the default action, and to associate the `WebACL` with a CloudFront distribution.

For more information about how to use the AWS WAF API, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create a web ACL


# The following example creates a web ACL named CreateExample.

resp = client.create_web_acl({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  default_action: {
    type: "ALLOW", 
  }, 
  metric_name: "CreateExample", 
  name: "CreateExample", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  web_acl: {
    default_action: {
      type: "ALLOW", 
    }, 
    metric_name: "CreateExample", 
    name: "CreateExample", 
    rules: [
      {
        action: {
          type: "ALLOW", 
        }, 
        priority: 1, 
        rule_id: "WAFRule-1-Example", 
      }, 
    ], 
    web_acl_id: "example-46da-4444-5555-example", 
  }, 
}

Request syntax with placeholder values


resp = client.create_web_acl({
  name: "ResourceName", # required
  metric_name: "MetricName", # required
  default_action: { # required
    type: "BLOCK", # required, accepts BLOCK, ALLOW, COUNT
  },
  change_token: "ChangeToken", # required
  tags: [
    {
      key: "TagKey", # required
      value: "TagValue", # required
    },
  ],
})

Response structure


resp.web_acl.web_acl_id #=> String
resp.web_acl.name #=> String
resp.web_acl.metric_name #=> String
resp.web_acl.default_action.type #=> String, one of "BLOCK", "ALLOW", "COUNT"
resp.web_acl.rules #=> Array
resp.web_acl.rules[0].priority #=> Integer
resp.web_acl.rules[0].rule_id #=> String
resp.web_acl.rules[0].action.type #=> String, one of "BLOCK", "ALLOW", "COUNT"
resp.web_acl.rules[0].override_action.type #=> String, one of "NONE", "COUNT"
resp.web_acl.rules[0].type #=> String, one of "REGULAR", "RATE_BASED", "GROUP"
resp.web_acl.rules[0].excluded_rules #=> Array
resp.web_acl.rules[0].excluded_rules[0].rule_id #=> String
resp.web_acl.web_acl_arn #=> String
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description of the WebACL. You can’t change ‘Name` after you create the `WebACL`.
:metric_name (required, String) —

A friendly name or description for the metrics for this ‘WebACL`.The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change ‘MetricName` after you create the `WebACL`.
:default_action (required, Types::WafAction) —

The action that you want AWS WAF to take when a request doesn’t match the criteria specified in any of the ‘Rule` objects that are associated with the `WebACL`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:tags (Array<Types::Tag>)

Returns:

(Types::CreateWebACLResponse) —
Returns a response object which responds to the following methods:
- #web_acl => Types::WebACL
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1651

def create_web_acl(params = {}, options = {})
  req = build_request(:create_web_acl, params)
  req.send_request(options)
end

#create_web_acl_migration_stack(params = {}) ⇒ `Types::CreateWebACLMigrationStackResponse`

Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF.

This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see [Migrating your AWS WAF Classic resources to AWS WAF] in the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/waf-migrating-from-classic.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.create_web_acl_migration_stack({
  web_acl_id: "ResourceId", # required
  s3_bucket_name: "S3BucketName", # required
  ignore_unsupported_type: false, # required
})

Response structure


resp.s3_object_url #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The UUID of the WAF Classic web ACL that you want to migrate to WAF v2.
:s3_bucket_name (required, String) —
The name of the Amazon S3 bucket to store the CloudFormation template in. The S3 bucket must be configured as follows for the migration:
- The bucket name must start with ‘aws-waf-migration-`. For example, `aws-waf-migration-my-web-acl`.
- The bucket must be in the Region where you are deploying the template. For example, for a web ACL in us-west-2, you must use an Amazon S3 bucket in us-west-2 and you must deploy the template stack to us-west-2.
- The bucket policies must permit the migration process to write data. For listings of the bucket policies, see the Examples section.
:ignore_unsupported_type (required, Boolean) —

Indicates whether to exclude entities that can’t be migrated or to stop the migration. Set this to true to ignore unsupported entities in the web ACL during the migration. Otherwise, if AWS WAF encounters unsupported entities, it stops the process and throws an exception.

Returns:

(Types::CreateWebACLMigrationStackResponse) —
Returns a response object which responds to the following methods:
- #s3_object_url => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1718

def create_web_acl_migration_stack(params = {}, options = {})
  req = build_request(:create_web_acl_migration_stack, params)
  req.send_request(options)
end

#create_xss_match_set(params = {}) ⇒ `Types::CreateXssMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Creates an XssMatchSet, which you use to allow, block, or count requests that contain cross-site scripting attacks in the specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.

To create and configure an ‘XssMatchSet`, perform the following steps:

Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `CreateXssMatchSet` request.
Submit a ‘CreateXssMatchSet` request.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateXssMatchSet request.
Submit an UpdateXssMatchSet request to specify the parts of web requests in which you want to allow, block, or count cross-site scripting attacks.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To create an XSS match set


# The following example creates an XSS match set named MySampleXssMatchSet.

resp = client.create_xss_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  name: "MySampleXssMatchSet", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  xss_match_set: {
    name: "MySampleXssMatchSet", 
    xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    xss_match_tuples: [
      {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.create_xss_match_set({
  name: "ResourceName", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.xss_match_set.xss_match_set_id #=> String
resp.xss_match_set.name #=> String
resp.xss_match_set.xss_match_tuples #=> Array
resp.xss_match_set.xss_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.xss_match_set.xss_match_tuples[0].field_to_match.data #=> String
resp.xss_match_set.xss_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:name (required, String) —

A friendly name or description for the XssMatchSet that you’re creating. You can’t change ‘Name` after you create the `XssMatchSet`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::CreateXssMatchSetResponse) —
Returns a response object which responds to the following methods:
- #xss_match_set => Types::XssMatchSet
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1820

def create_xss_match_set(params = {}, options = {})
  req = build_request(:create_xss_match_set, params)
  req.send_request(options)
end

#delete_byte_match_set(params = {}) ⇒ `Types::DeleteByteMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a ByteMatchSet. You can’t delete a ‘ByteMatchSet` if it’s still used in any ‘Rules` or if it still includes any ByteMatchTuple objects (any filters).

If you just want to remove a ‘ByteMatchSet` from a `Rule`, use UpdateRule.

To permanently delete a ‘ByteMatchSet`, perform the following steps:

Update the ‘ByteMatchSet` to remove filters, if any. For more information, see UpdateByteMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteByteMatchSet` request.
Submit a ‘DeleteByteMatchSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete a byte match set


# The following example deletes a byte match set with the ID exampleIDs3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.delete_byte_match_set({
  byte_match_set_id: "exampleIDs3t-46da-4fdb-b8d5-abc321j569j5", 
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_byte_match_set({
  byte_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:byte_match_set_id (required, String) —

The ‘ByteMatchSetId` of the ByteMatchSet that you want to delete. `ByteMatchSetId` is returned by CreateByteMatchSet and by ListByteMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteByteMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1898

def delete_byte_match_set(params = {}, options = {})
  req = build_request(:delete_byte_match_set, params)
  req.send_request(options)
end

#delete_geo_match_set(params = {}) ⇒ `Types::DeleteGeoMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a GeoMatchSet. You can’t delete a ‘GeoMatchSet` if it’s still used in any ‘Rules` or if it still includes any countries.

If you just want to remove a ‘GeoMatchSet` from a `Rule`, use UpdateRule.

To permanently delete a ‘GeoMatchSet` from AWS WAF, perform the following steps:

Update the ‘GeoMatchSet` to remove any countries. For more information, see UpdateGeoMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteGeoMatchSet` request.
Submit a ‘DeleteGeoMatchSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_geo_match_set({
  geo_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:geo_match_set_id (required, String) —

The ‘GeoMatchSetID` of the GeoMatchSet that you want to delete. `GeoMatchSetId` is returned by CreateGeoMatchSet and by ListGeoMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteGeoMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 1962

def delete_geo_match_set(params = {}, options = {})
  req = build_request(:delete_geo_match_set, params)
  req.send_request(options)
end

#delete_ip_set(params = {}) ⇒ `Types::DeleteIPSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes an IPSet. You can’t delete an ‘IPSet` if it’s still used in any ‘Rules` or if it still includes any IP addresses.

If you just want to remove an ‘IPSet` from a `Rule`, use UpdateRule.

To permanently delete an ‘IPSet` from AWS WAF, perform the following steps:

Update the ‘IPSet` to remove IP address ranges, if any. For more information, see UpdateIPSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteIPSet` request.
Submit a ‘DeleteIPSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete an IP set


# The following example deletes an IP match set  with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.delete_ip_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  ip_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_ip_set({
  ip_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:ip_set_id (required, String) —

The ‘IPSetId` of the IPSet that you want to delete. `IPSetId` is returned by CreateIPSet and by ListIPSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteIPSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2038

def delete_ip_set(params = {}, options = {})
  req = build_request(:delete_ip_set, params)
  req.send_request(options)
end

#delete_logging_configuration(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes the LoggingConfiguration from the specified web ACL.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_logging_configuration({
  resource_arn: "ResourceArn", # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —

The Amazon Resource Name (ARN) of the web ACL from which you want to delete the LoggingConfiguration.

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2076

def delete_logging_configuration(params = {}, options = {})
  req = build_request(:delete_logging_configuration, params)
  req.send_request(options)
end

#delete_permission_policy(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes an IAM policy from the specified RuleGroup.

The user making the request must be the owner of the RuleGroup.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_permission_policy({
  resource_arn: "ResourceArn", # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —

The Amazon Resource Name (ARN) of the RuleGroup from which you want to delete the policy.

The user making the request must be the owner of the RuleGroup.

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2117

def delete_permission_policy(params = {}, options = {})
  req = build_request(:delete_permission_policy, params)
  req.send_request(options)
end

#delete_rate_based_rule(params = {}) ⇒ `Types::DeleteRateBasedRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a RateBasedRule. You can’t delete a rule if it’s still used in any ‘WebACL` objects or if it still includes any predicates, such as `ByteMatchSet` objects.

If you just want to remove a rule from a ‘WebACL`, use UpdateWebACL.

To permanently delete a ‘RateBasedRule` from AWS WAF, perform the following steps:

Update the ‘RateBasedRule` to remove predicates, if any. For more information, see UpdateRateBasedRule.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteRateBasedRule` request.
Submit a ‘DeleteRateBasedRule` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_rate_based_rule({
  rule_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the RateBasedRule that you want to delete. `RuleId` is returned by CreateRateBasedRule and by ListRateBasedRules.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteRateBasedRuleResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2179

def delete_rate_based_rule(params = {}, options = {})
  req = build_request(:delete_rate_based_rule, params)
  req.send_request(options)
end

#delete_regex_match_set(params = {}) ⇒ `Types::DeleteRegexMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a RegexMatchSet. You can’t delete a ‘RegexMatchSet` if it’s still used in any ‘Rules` or if it still includes any `RegexMatchTuples` objects (any filters).

If you just want to remove a ‘RegexMatchSet` from a `Rule`, use UpdateRule.

To permanently delete a ‘RegexMatchSet`, perform the following steps:

Update the ‘RegexMatchSet` to remove filters, if any. For more information, see UpdateRegexMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteRegexMatchSet` request.
Submit a ‘DeleteRegexMatchSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_regex_match_set({
  regex_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_match_set_id (required, String) —

The ‘RegexMatchSetId` of the RegexMatchSet that you want to delete. `RegexMatchSetId` is returned by CreateRegexMatchSet and by ListRegexMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteRegexMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2242

def delete_regex_match_set(params = {}, options = {})
  req = build_request(:delete_regex_match_set, params)
  req.send_request(options)
end

#delete_regex_pattern_set(params = {}) ⇒ `Types::DeleteRegexPatternSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a RegexPatternSet. You can’t delete a ‘RegexPatternSet` if it’s still used in any ‘RegexMatchSet` or if the `RegexPatternSet` is not empty.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_regex_pattern_set({
  regex_pattern_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_pattern_set_id (required, String) —

The ‘RegexPatternSetId` of the RegexPatternSet that you want to delete. `RegexPatternSetId` is returned by CreateRegexPatternSet and by ListRegexPatternSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteRegexPatternSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2292

def delete_regex_pattern_set(params = {}, options = {})
  req = build_request(:delete_regex_pattern_set, params)
  req.send_request(options)
end

#delete_rule(params = {}) ⇒ `Types::DeleteRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a Rule. You can’t delete a ‘Rule` if it’s still used in any ‘WebACL` objects or if it still includes any predicates, such as `ByteMatchSet` objects.

If you just want to remove a ‘Rule` from a `WebACL`, use UpdateWebACL.

To permanently delete a ‘Rule` from AWS WAF, perform the following steps:

Update the ‘Rule` to remove predicates, if any. For more information, see UpdateRule.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteRule` request.
Submit a ‘DeleteRule` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete a rule


# The following example deletes a rule with the ID WAFRule-1-Example.

resp = client.delete_rule({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  rule_id: "WAFRule-1-Example", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_rule({
  rule_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the Rule that you want to delete. `RuleId` is returned by CreateRule and by ListRules.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteRuleResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2369

def delete_rule(params = {}, options = {})
  req = build_request(:delete_rule, params)
  req.send_request(options)
end

#delete_rule_group(params = {}) ⇒ `Types::DeleteRuleGroupResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a RuleGroup. You can’t delete a ‘RuleGroup` if it’s still used in any ‘WebACL` objects or if it still includes any rules.

If you just want to remove a ‘RuleGroup` from a `WebACL`, use UpdateWebACL.

To permanently delete a ‘RuleGroup` from AWS WAF, perform the following steps:

Update the ‘RuleGroup` to remove rules, if any. For more information, see UpdateRuleGroup.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteRuleGroup` request.
Submit a ‘DeleteRuleGroup` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.delete_rule_group({
  rule_group_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_group_id (required, String) —

The ‘RuleGroupId` of the RuleGroup that you want to delete. `RuleGroupId` is returned by CreateRuleGroup and by ListRuleGroups.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteRuleGroupResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2432

def delete_rule_group(params = {}, options = {})
  req = build_request(:delete_rule_group, params)
  req.send_request(options)
end

#delete_size_constraint_set(params = {}) ⇒ `Types::DeleteSizeConstraintSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a SizeConstraintSet. You can’t delete a ‘SizeConstraintSet` if it’s still used in any ‘Rules` or if it still includes any SizeConstraint objects (any filters).

If you just want to remove a ‘SizeConstraintSet` from a `Rule`, use UpdateRule.

To permanently delete a ‘SizeConstraintSet`, perform the following steps:

Update the ‘SizeConstraintSet` to remove filters, if any. For more information, see UpdateSizeConstraintSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteSizeConstraintSet` request.
Submit a ‘DeleteSizeConstraintSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete a size constraint set


# The following example deletes a size constraint set  with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.delete_size_constraint_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_size_constraint_set({
  size_constraint_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:size_constraint_set_id (required, String) —

The ‘SizeConstraintSetId` of the SizeConstraintSet that you want to delete. `SizeConstraintSetId` is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteSizeConstraintSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2511

def delete_size_constraint_set(params = {}, options = {})
  req = build_request(:delete_size_constraint_set, params)
  req.send_request(options)
end

#delete_sql_injection_match_set(params = {}) ⇒ `Types::DeleteSqlInjectionMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a SqlInjectionMatchSet. You can’t delete a ‘SqlInjectionMatchSet` if it’s still used in any ‘Rules` or if it still contains any SqlInjectionMatchTuple objects.

If you just want to remove a ‘SqlInjectionMatchSet` from a `Rule`, use UpdateRule.

To permanently delete a ‘SqlInjectionMatchSet` from AWS WAF, perform the following steps:

Update the ‘SqlInjectionMatchSet` to remove filters, if any. For more information, see UpdateSqlInjectionMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteSqlInjectionMatchSet` request.
Submit a ‘DeleteSqlInjectionMatchSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete a SQL injection match set


# The following example deletes a SQL injection match set  with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.delete_sql_injection_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_sql_injection_match_set({
  sql_injection_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:sql_injection_match_set_id (required, String) —

The ‘SqlInjectionMatchSetId` of the SqlInjectionMatchSet that you want to delete. `SqlInjectionMatchSetId` is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteSqlInjectionMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2590

def delete_sql_injection_match_set(params = {}, options = {})
  req = build_request(:delete_sql_injection_match_set, params)
  req.send_request(options)
end

#delete_web_acl(params = {}) ⇒ `Types::DeleteWebACLResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes a WebACL. You can’t delete a ‘WebACL` if it still contains any `Rules`.

To delete a ‘WebACL`, perform the following steps:

Update the ‘WebACL` to remove `Rules`, if any. For more information, see UpdateWebACL.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteWebACL` request.
Submit a ‘DeleteWebACL` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete a web ACL


# The following example deletes a web ACL with the ID example-46da-4444-5555-example.

resp = client.delete_web_acl({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  web_acl_id: "example-46da-4444-5555-example", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_web_acl({
  web_acl_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The ‘WebACLId` of the WebACL that you want to delete. `WebACLId` is returned by CreateWebACL and by ListWebACLs.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteWebACLResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2663

def delete_web_acl(params = {}, options = {})
  req = build_request(:delete_web_acl, params)
  req.send_request(options)
end

#delete_xss_match_set(params = {}) ⇒ `Types::DeleteXssMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Permanently deletes an XssMatchSet. You can’t delete an ‘XssMatchSet` if it’s still used in any ‘Rules` or if it still contains any XssMatchTuple objects.

If you just want to remove an ‘XssMatchSet` from a `Rule`, use UpdateRule.

To permanently delete an ‘XssMatchSet` from AWS WAF, perform the following steps:

Update the ‘XssMatchSet` to remove filters, if any. For more information, see UpdateXssMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of a `DeleteXssMatchSet` request.
Submit a ‘DeleteXssMatchSet` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To delete an XSS match set


# The following example deletes an XSS match set with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.delete_xss_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.delete_xss_match_set({
  xss_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:xss_match_set_id (required, String) —

The ‘XssMatchSetId` of the XssMatchSet that you want to delete. `XssMatchSetId` is returned by CreateXssMatchSet and by ListXssMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::DeleteXssMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2742

def delete_xss_match_set(params = {}, options = {})
  req = build_request(:delete_xss_match_set, params)
  req.send_request(options)
end

#disassociate_web_acl(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation. For more information, see [AWS WAF Classic] in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Removes a web ACL from the specified resource, either an application load balancer or Amazon API Gateway stage.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.disassociate_web_acl({
  resource_arn: "ResourceArn", # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —
The ARN (Amazon Resource Name) of the resource from which the web ACL is being removed, either an application load balancer or Amazon API Gateway stage.

The ARN should be in one of the following formats:
- For an Application Load Balancer: ‘arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id `
- For an Amazon API Gateway stage: ‘arn:aws:apigateway:region::/restapis/api-id/stages/stage-name `

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2790

def disassociate_web_acl(params = {}, options = {})
  req = build_request(:disassociate_web_acl, params)
  req.send_request(options)
end

#get_byte_match_set(params = {}) ⇒ `Types::GetByteMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the ByteMatchSet specified by ‘ByteMatchSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a byte match set


# The following example returns the details of a byte match set with the ID exampleIDs3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_byte_match_set({
  byte_match_set_id: "exampleIDs3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  byte_match_set: {
    byte_match_set_id: "exampleIDs3t-46da-4fdb-b8d5-abc321j569j5", 
    byte_match_tuples: [
      {
        field_to_match: {
          data: "referer", 
          type: "HEADER", 
        }, 
        positional_constraint: "CONTAINS", 
        target_string: "badrefer1", 
        text_transformation: "NONE", 
      }, 
    ], 
    name: "ByteMatchNameExample", 
  }, 
}

Request syntax with placeholder values


resp = client.get_byte_match_set({
  byte_match_set_id: "ResourceId", # required
})

Response structure


resp.byte_match_set.byte_match_set_id #=> String
resp.byte_match_set.name #=> String
resp.byte_match_set.byte_match_tuples #=> Array
resp.byte_match_set.byte_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.byte_match_set.byte_match_tuples[0].field_to_match.data #=> String
resp.byte_match_set.byte_match_tuples[0].target_string #=> String
resp.byte_match_set.byte_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.byte_match_set.byte_match_tuples[0].positional_constraint #=> String, one of "EXACTLY", "STARTS_WITH", "ENDS_WITH", "CONTAINS", "CONTAINS_WORD"

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:byte_match_set_id (required, String) —

The ‘ByteMatchSetId` of the ByteMatchSet that you want to get. `ByteMatchSetId` is returned by CreateByteMatchSet and by ListByteMatchSets.

Returns:

(Types::GetByteMatchSetResponse) —
Returns a response object which responds to the following methods:
- #byte_match_set => Types::ByteMatchSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2869

def get_byte_match_set(params = {}, options = {})
  req = build_request(:get_byte_match_set, params)
  req.send_request(options)
end

#get_change_token(params = {}) ⇒ `Types::GetChangeTokenResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn’t submit conflicting requests to AWS WAF.

Each create, update, or delete request must use a unique change token. If your application submits a ‘GetChangeToken` request and then submits a second `GetChangeToken` request before submitting a create, update, or delete request, the second `GetChangeToken` request returns the same value as the first `GetChangeToken` request.

When you use a change token in a create, update, or delete request, the status of the change token changes to ‘PENDING`, which indicates that AWS WAF is propagating the change to all AWS WAF servers. Use `GetChangeTokenStatus` to determine the status of your change token.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a change token


# The following example returns a change token to use for a create, update or delete operation.

resp = client.get_change_token({
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Returns:

(Types::GetChangeTokenResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2929

def get_change_token(params = {}, options = {})
  req = build_request(:get_change_token, params)
  req.send_request(options)
end

#get_change_token_status(params = {}) ⇒ `Types::GetChangeTokenStatusResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the status of a ‘ChangeToken` that you got by calling GetChangeToken. `ChangeTokenStatus` is one of the following values:

‘PROVISIONED`: You requested the change token by calling `GetChangeToken`, but you haven’t used it yet in a call to create, update, or delete an AWS WAF object.
‘PENDING`: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers.
‘INSYNC`: Propagation is complete.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get the change token status


# The following example returns the status of a change token with the ID abcd12f2-46da-4fdb-b8d5-fbd4c466928f.

resp = client.get_change_token_status({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
})

resp.to_h outputs the following:
{
  change_token_status: "PENDING", 
}

Request syntax with placeholder values


resp = client.get_change_token_status({
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token_status #=> String, one of "PROVISIONED", "PENDING", "INSYNC"

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:change_token (required, String) —

The change token for which you want to get the status. This change token was previously returned in the ‘GetChangeToken` response.

Returns:

(Types::GetChangeTokenStatusResponse) —
Returns a response object which responds to the following methods:
- #change_token_status => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 2996

def get_change_token_status(params = {}, options = {})
  req = build_request(:get_change_token_status, params)
  req.send_request(options)
end

#get_geo_match_set(params = {}) ⇒ `Types::GetGeoMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the GeoMatchSet that is specified by ‘GeoMatchSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_geo_match_set({
  geo_match_set_id: "ResourceId", # required
})

Response structure


resp.geo_match_set.geo_match_set_id #=> String
resp.geo_match_set.name #=> String
resp.geo_match_set.geo_match_constraints #=> Array
resp.geo_match_set.geo_match_constraints[0].type #=> String, one of "Country"
resp.geo_match_set.geo_match_constraints[0].value #=> String, one of "AF", "AX", "AL", "DZ", "AS", "AD", "AO", "AI", "AQ", "AG", "AR", "AM", "AW", "AU", "AT", "AZ", "BS", "BH", "BD", "BB", "BY", "BE", "BZ", "BJ", "BM", "BT", "BO", "BQ", "BA", "BW", "BV", "BR", "IO", "BN", "BG", "BF", "BI", "KH", "CM", "CA", "CV", "KY", "CF", "TD", "CL", "CN", "CX", "CC", "CO", "KM", "CG", "CD", "CK", "CR", "CI", "HR", "CU", "CW", "CY", "CZ", "DK", "DJ", "DM", "DO", "EC", "EG", "SV", "GQ", "ER", "EE", "ET", "FK", "FO", "FJ", "FI", "FR", "GF", "PF", "TF", "GA", "GM", "GE", "DE", "GH", "GI", "GR", "GL", "GD", "GP", "GU", "GT", "GG", "GN", "GW", "GY", "HT", "HM", "VA", "HN", "HK", "HU", "IS", "IN", "ID", "IR", "IQ", "IE", "IM", "IL", "IT", "JM", "JP", "JE", "JO", "KZ", "KE", "KI", "KP", "KR", "KW", "KG", "LA", "LV", "LB", "LS", "LR", "LY", "LI", "LT", "LU", "MO", "MK", "MG", "MW", "MY", "MV", "ML", "MT", "MH", "MQ", "MR", "MU", "YT", "MX", "FM", "MD", "MC", "MN", "ME", "MS", "MA", "MZ", "MM", "NA", "NR", "NP", "NL", "NC", "NZ", "NI", "NE", "NG", "NU", "NF", "MP", "NO", "OM", "PK", "PW", "PS", "PA", "PG", "PY", "PE", "PH", "PN", "PL", "PT", "PR", "QA", "RE", "RO", "RU", "RW", "BL", "SH", "KN", "LC", "MF", "PM", "VC", "WS", "SM", "ST", "SA", "SN", "RS", "SC", "SL", "SG", "SX", "SK", "SI", "SB", "SO", "ZA", "GS", "SS", "ES", "LK", "SD", "SR", "SJ", "SZ", "SE", "CH", "SY", "TW", "TJ", "TZ", "TH", "TL", "TG", "TK", "TO", "TT", "TN", "TR", "TM", "TC", "TV", "UG", "UA", "AE", "GB", "US", "UM", "UY", "UZ", "VU", "VE", "VN", "VG", "VI", "WF", "EH", "YE", "ZM", "ZW"

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:geo_match_set_id (required, String) —

The ‘GeoMatchSetId` of the GeoMatchSet that you want to get. `GeoMatchSetId` is returned by CreateGeoMatchSet and by ListGeoMatchSets.

Returns:

(Types::GetGeoMatchSetResponse) —
Returns a response object which responds to the following methods:
- #geo_match_set => Types::GeoMatchSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3044

def get_geo_match_set(params = {}, options = {})
  req = build_request(:get_geo_match_set, params)
  req.send_request(options)
end

#get_ip_set(params = {}) ⇒ `Types::GetIPSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the IPSet that is specified by ‘IPSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get an IP set


# The following example returns the details of an IP match set with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_ip_set({
  ip_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  ip_set: {
    ip_set_descriptors: [
      {
        type: "IPV4", 
        value: "192.0.2.44/32", 
      }, 
    ], 
    ip_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    name: "MyIPSetFriendlyName", 
  }, 
}

Request syntax with placeholder values


resp = client.get_ip_set({
  ip_set_id: "ResourceId", # required
})

Response structure


resp.ip_set.ip_set_id #=> String
resp.ip_set.name #=> String
resp.ip_set.ip_set_descriptors #=> Array
resp.ip_set.ip_set_descriptors[0].type #=> String, one of "IPV4", "IPV6"
resp.ip_set.ip_set_descriptors[0].value #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:ip_set_id (required, String) —

The ‘IPSetId` of the IPSet that you want to get. `IPSetId` is returned by CreateIPSet and by ListIPSets.

Returns:

(Types::GetIPSetResponse) —
Returns a response object which responds to the following methods:
- #ip_set => Types::IPSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3114

def get_ip_set(params = {}, options = {})
  req = build_request(:get_ip_set, params)
  req.send_request(options)
end

#get_logging_configuration(params = {}) ⇒ `Types::GetLoggingConfigurationResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the LoggingConfiguration for the specified web ACL.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_logging_configuration({
  resource_arn: "ResourceArn", # required
})

Response structure


resp.logging_configuration.resource_arn #=> String
resp.logging_configuration.log_destination_configs #=> Array
resp.logging_configuration.log_destination_configs[0] #=> String
resp.logging_configuration.redacted_fields #=> Array
resp.logging_configuration.redacted_fields[0].type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.logging_configuration.redacted_fields[0].data #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —

The Amazon Resource Name (ARN) of the web ACL for which you want to get the LoggingConfiguration.

Returns:

(Types::GetLoggingConfigurationResponse) —
Returns a response object which responds to the following methods:
- #logging_configuration => Types::LoggingConfiguration

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3162

def get_logging_configuration(params = {}, options = {})
  req = build_request(:get_logging_configuration, params)
  req.send_request(options)
end

#get_permission_policy(params = {}) ⇒ `Types::GetPermissionPolicyResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the IAM policy attached to the RuleGroup.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_permission_policy({
  resource_arn: "ResourceArn", # required
})

Response structure


resp.policy #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —

The Amazon Resource Name (ARN) of the RuleGroup for which you want to get the policy.

Returns:

(Types::GetPermissionPolicyResponse) —
Returns a response object which responds to the following methods:
- #policy => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3205

def get_permission_policy(params = {}, options = {})
  req = build_request(:get_permission_policy, params)
  req.send_request(options)
end

#get_rate_based_rule(params = {}) ⇒ `Types::GetRateBasedRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the RateBasedRule that is specified by the ‘RuleId` that you included in the `GetRateBasedRule` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_rate_based_rule({
  rule_id: "ResourceId", # required
})

Response structure


resp.rule.rule_id #=> String
resp.rule.name #=> String
resp.rule.metric_name #=> String
resp.rule.match_predicates #=> Array
resp.rule.match_predicates[0].negated #=> Boolean
resp.rule.match_predicates[0].type #=> String, one of "IPMatch", "ByteMatch", "SqlInjectionMatch", "GeoMatch", "SizeConstraint", "XssMatch", "RegexMatch"
resp.rule.match_predicates[0].data_id #=> String
resp.rule.rate_key #=> String, one of "IP"
resp.rule.rate_limit #=> Integer

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the RateBasedRule that you want to get. `RuleId` is returned by CreateRateBasedRule and by ListRateBasedRules.

Returns:

(Types::GetRateBasedRuleResponse) —
Returns a response object which responds to the following methods:
- #rule => Types::RateBasedRule

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3257

def get_rate_based_rule(params = {}, options = {})
  req = build_request(:get_rate_based_rule, params)
  req.send_request(options)
end

#get_rate_based_rule_managed_keys(params = {}) ⇒ `Types::GetRateBasedRuleManagedKeysResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the ‘RuleId`. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_rate_based_rule_managed_keys({
  rule_id: "ResourceId", # required
  next_marker: "NextMarker",
})

Response structure


resp.managed_keys #=> Array
resp.managed_keys[0] #=> String
resp.next_marker #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the RateBasedRule for which you want to get a list of `ManagedKeys`. `RuleId` is returned by CreateRateBasedRule and by ListRateBasedRules.
:next_marker (String) —

A null value and not currently used. Do not include this in your request.

Returns:

(Types::GetRateBasedRuleManagedKeysResponse) —
Returns a response object which responds to the following methods:
- #managed_keys => Array<String>
- #next_marker => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3313

def get_rate_based_rule_managed_keys(params = {}, options = {})
  req = build_request(:get_rate_based_rule_managed_keys, params)
  req.send_request(options)
end

#get_regex_match_set(params = {}) ⇒ `Types::GetRegexMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the RegexMatchSet specified by ‘RegexMatchSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_regex_match_set({
  regex_match_set_id: "ResourceId", # required
})

Response structure


resp.regex_match_set.regex_match_set_id #=> String
resp.regex_match_set.name #=> String
resp.regex_match_set.regex_match_tuples #=> Array
resp.regex_match_set.regex_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.regex_match_set.regex_match_tuples[0].field_to_match.data #=> String
resp.regex_match_set.regex_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.regex_match_set.regex_match_tuples[0].regex_pattern_set_id #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_match_set_id (required, String) —

The ‘RegexMatchSetId` of the RegexMatchSet that you want to get. `RegexMatchSetId` is returned by CreateRegexMatchSet and by ListRegexMatchSets.

Returns:

(Types::GetRegexMatchSetResponse) —
Returns a response object which responds to the following methods:
- #regex_match_set => Types::RegexMatchSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3363

def get_regex_match_set(params = {}, options = {})
  req = build_request(:get_regex_match_set, params)
  req.send_request(options)
end

#get_regex_pattern_set(params = {}) ⇒ `Types::GetRegexPatternSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the RegexPatternSet specified by ‘RegexPatternSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_regex_pattern_set({
  regex_pattern_set_id: "ResourceId", # required
})

Response structure


resp.regex_pattern_set.regex_pattern_set_id #=> String
resp.regex_pattern_set.name #=> String
resp.regex_pattern_set.regex_pattern_strings #=> Array
resp.regex_pattern_set.regex_pattern_strings[0] #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_pattern_set_id (required, String) —

The ‘RegexPatternSetId` of the RegexPatternSet that you want to get. `RegexPatternSetId` is returned by CreateRegexPatternSet and by ListRegexPatternSets.

Returns:

(Types::GetRegexPatternSetResponse) —
Returns a response object which responds to the following methods:
- #regex_pattern_set => Types::RegexPatternSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3410

def get_regex_pattern_set(params = {}, options = {})
  req = build_request(:get_regex_pattern_set, params)
  req.send_request(options)
end

#get_rule(params = {}) ⇒ `Types::GetRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the Rule that is specified by the ‘RuleId` that you included in the `GetRule` request.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a rule


# The following example returns the details of a rule with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_rule({
  rule_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  rule: {
    metric_name: "WAFByteHeaderRule", 
    name: "WAFByteHeaderRule", 
    predicates: [
      {
        data_id: "MyByteMatchSetID", 
        negated: false, 
        type: "ByteMatch", 
      }, 
    ], 
    rule_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
  }, 
}

Request syntax with placeholder values


resp = client.get_rule({
  rule_id: "ResourceId", # required
})

Response structure


resp.rule.rule_id #=> String
resp.rule.name #=> String
resp.rule.metric_name #=> String
resp.rule.predicates #=> Array
resp.rule.predicates[0].negated #=> Boolean
resp.rule.predicates[0].type #=> String, one of "IPMatch", "ByteMatch", "SqlInjectionMatch", "GeoMatch", "SizeConstraint", "XssMatch", "RegexMatch"
resp.rule.predicates[0].data_id #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the Rule that you want to get. `RuleId` is returned by CreateRule and by ListRules.

Returns:

(Types::GetRuleResponse) —
Returns a response object which responds to the following methods:
- #rule => Types::Rule

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3485

def get_rule(params = {}, options = {})
  req = build_request(:get_rule, params)
  req.send_request(options)
end

#get_rule_group(params = {}) ⇒ `Types::GetRuleGroupResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the RuleGroup that is specified by the ‘RuleGroupId` that you included in the `GetRuleGroup` request.

To view the rules in a rule group, use ListActivatedRulesInRuleGroup.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_rule_group({
  rule_group_id: "ResourceId", # required
})

Response structure


resp.rule_group.rule_group_id #=> String
resp.rule_group.name #=> String
resp.rule_group.metric_name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_group_id (required, String) —

The ‘RuleGroupId` of the RuleGroup that you want to get. `RuleGroupId` is returned by CreateRuleGroup and by ListRuleGroups.

Returns:

(Types::GetRuleGroupResponse) —
Returns a response object which responds to the following methods:
- #rule_group => Types::RuleGroup

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3533

def get_rule_group(params = {}, options = {})
  req = build_request(:get_rule_group, params)
  req.send_request(options)
end

#get_sampled_requests(params = {}) ⇒ `Types::GetSampledRequestsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Gets detailed information about a specified number of requests–a sample–that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours.

‘GetSampledRequests` returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed, `GetSampledRequests` returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a sampled requests


# The following example returns detailed information about 100 requests --a sample-- that AWS WAF randomly selects from
# among the first 5,000 requests that your AWS resource received between the time period 2016-09-27T15:50Z to
# 2016-09-27T15:50Z.

resp = client.get_sampled_requests({
  max_items: 100, 
  rule_id: "WAFRule-1-Example", 
  time_window: {
    end_time: Time.parse("2016-09-27T15:50Z"), 
    start_time: Time.parse("2016-09-27T15:50Z"), 
  }, 
  web_acl_id: "createwebacl-1472061481310", 
})

resp.to_h outputs the following:
{
  population_size: 50, 
  sampled_requests: [
    {
      action: "BLOCK", 
      request: {
        client_ip: "192.0.2.44", 
        country: "US", 
        http_version: "HTTP/1.1", 
        headers: [
          {
            name: "User-Agent", 
            value: "BadBot ", 
          }, 
        ], 
        method: "HEAD", 
      }, 
      timestamp: Time.parse("2016-09-27T14:55Z"), 
      weight: 1, 
    }, 
  ], 
  time_window: {
    end_time: Time.parse("2016-09-27T15:50Z"), 
    start_time: Time.parse("2016-09-27T14:50Z"), 
  }, 
}

Request syntax with placeholder values


resp = client.get_sampled_requests({
  web_acl_id: "ResourceId", # required
  rule_id: "ResourceId", # required
  time_window: { # required
    start_time: Time.now, # required
    end_time: Time.now, # required
  },
  max_items: 1, # required
})

Response structure


resp.sampled_requests #=> Array
resp.sampled_requests[0].request.client_ip #=> String
resp.sampled_requests[0].request.country #=> String
resp.sampled_requests[0].request.uri #=> String
resp.sampled_requests[0].request.method #=> String
resp.sampled_requests[0].request.http_version #=> String
resp.sampled_requests[0].request.headers #=> Array
resp.sampled_requests[0].request.headers[0].name #=> String
resp.sampled_requests[0].request.headers[0].value #=> String
resp.sampled_requests[0].weight #=> Integer
resp.sampled_requests[0].timestamp #=> Time
resp.sampled_requests[0].action #=> String
resp.sampled_requests[0].rule_within_rule_group #=> String
resp.population_size #=> Integer
resp.time_window.start_time #=> Time
resp.time_window.end_time #=> Time

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The ‘WebACLId` of the `WebACL` for which you want `GetSampledRequests` to return a sample of requests.
:rule_id (required, String) —
‘RuleId` is one of three values:
- The ‘RuleId` of the `Rule` or the `RuleGroupId` of the `RuleGroup` for which you want `GetSampledRequests` to return a sample of requests.
- ‘Default_Action`, which causes `GetSampledRequests` to return a sample of the requests that didn’t match any of the rules in the specified ‘WebACL`.
:time_window (required, Types::TimeWindow) —

The start date and time and the end date and time of the range for which you want ‘GetSampledRequests` to return a sample of requests. You must specify the times in Coordinated Universal Time (UTC) format. UTC format includes the special designator, `Z`. For example, `“2016-09-27T14:50Z”`. You can specify any time range in the previous three hours.
:max_items (required, Integer) —

The number of requests that you want AWS WAF to return from among the first 5,000 requests that your AWS resource received during the time range. If your resource received fewer requests than the value of ‘MaxItems`, `GetSampledRequests` returns information about all of them.

Returns:

(Types::GetSampledRequestsResponse) —
Returns a response object which responds to the following methods:
- #sampled_requests => Array<Types::SampledHTTPRequest>
- #population_size => Integer
- #time_window => Types::TimeWindow

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3681

def get_sampled_requests(params = {}, options = {})
  req = build_request(:get_sampled_requests, params)
  req.send_request(options)
end

#get_size_constraint_set(params = {}) ⇒ `Types::GetSizeConstraintSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the SizeConstraintSet specified by ‘SizeConstraintSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a size constraint set


# The following example returns the details of a size constraint match set with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_size_constraint_set({
  size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  size_constraint_set: {
    name: "MySampleSizeConstraintSet", 
    size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    size_constraints: [
      {
        comparison_operator: "GT", 
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        size: 0, 
        text_transformation: "NONE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.get_size_constraint_set({
  size_constraint_set_id: "ResourceId", # required
})

Response structure


resp.size_constraint_set.size_constraint_set_id #=> String
resp.size_constraint_set.name #=> String
resp.size_constraint_set.size_constraints #=> Array
resp.size_constraint_set.size_constraints[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.size_constraint_set.size_constraints[0].field_to_match.data #=> String
resp.size_constraint_set.size_constraints[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"
resp.size_constraint_set.size_constraints[0].comparison_operator #=> String, one of "EQ", "NE", "LE", "LT", "GE", "GT"
resp.size_constraint_set.size_constraints[0].size #=> Integer

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:size_constraint_set_id (required, String) —

The ‘SizeConstraintSetId` of the SizeConstraintSet that you want to get. `SizeConstraintSetId` is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.

Returns:

(Types::GetSizeConstraintSetResponse) —
Returns a response object which responds to the following methods:
- #size_constraint_set => Types::SizeConstraintSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3760

def get_size_constraint_set(params = {}, options = {})
  req = build_request(:get_size_constraint_set, params)
  req.send_request(options)
end

#get_sql_injection_match_set(params = {}) ⇒ `Types::GetSqlInjectionMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the SqlInjectionMatchSet that is specified by ‘SqlInjectionMatchSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a SQL injection match set


# The following example returns the details of a SQL injection match set with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_sql_injection_match_set({
  sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  sql_injection_match_set: {
    name: "MySQLInjectionMatchSet", 
    sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    sql_injection_match_tuples: [
      {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.get_sql_injection_match_set({
  sql_injection_match_set_id: "ResourceId", # required
})

Response structure


resp.sql_injection_match_set.sql_injection_match_set_id #=> String
resp.sql_injection_match_set.name #=> String
resp.sql_injection_match_set.sql_injection_match_tuples #=> Array
resp.sql_injection_match_set.sql_injection_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.sql_injection_match_set.sql_injection_match_tuples[0].field_to_match.data #=> String
resp.sql_injection_match_set.sql_injection_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:sql_injection_match_set_id (required, String) —

The ‘SqlInjectionMatchSetId` of the SqlInjectionMatchSet that you want to get. `SqlInjectionMatchSetId` is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.

Returns:

(Types::GetSqlInjectionMatchSetResponse) —
Returns a response object which responds to the following methods:
- #sql_injection_match_set => Types::SqlInjectionMatchSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3836

def get_sql_injection_match_set(params = {}, options = {})
  req = build_request(:get_sql_injection_match_set, params)
  req.send_request(options)
end

#get_web_acl(params = {}) ⇒ `Types::GetWebACLResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the WebACL that is specified by ‘WebACLId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get a web ACL


# The following example returns the details of a web ACL with the ID createwebacl-1472061481310.

resp = client.get_web_acl({
  web_acl_id: "createwebacl-1472061481310", 
})

resp.to_h outputs the following:
{
  web_acl: {
    default_action: {
      type: "ALLOW", 
    }, 
    metric_name: "CreateExample", 
    name: "CreateExample", 
    rules: [
      {
        action: {
          type: "ALLOW", 
        }, 
        priority: 1, 
        rule_id: "WAFRule-1-Example", 
      }, 
    ], 
    web_acl_id: "createwebacl-1472061481310", 
  }, 
}

Request syntax with placeholder values


resp = client.get_web_acl({
  web_acl_id: "ResourceId", # required
})

Response structure


resp.web_acl.web_acl_id #=> String
resp.web_acl.name #=> String
resp.web_acl.metric_name #=> String
resp.web_acl.default_action.type #=> String, one of "BLOCK", "ALLOW", "COUNT"
resp.web_acl.rules #=> Array
resp.web_acl.rules[0].priority #=> Integer
resp.web_acl.rules[0].rule_id #=> String
resp.web_acl.rules[0].action.type #=> String, one of "BLOCK", "ALLOW", "COUNT"
resp.web_acl.rules[0].override_action.type #=> String, one of "NONE", "COUNT"
resp.web_acl.rules[0].type #=> String, one of "REGULAR", "RATE_BASED", "GROUP"
resp.web_acl.rules[0].excluded_rules #=> Array
resp.web_acl.rules[0].excluded_rules[0].rule_id #=> String
resp.web_acl.web_acl_arn #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The ‘WebACLId` of the WebACL that you want to get. `WebACLId` is returned by CreateWebACL and by ListWebACLs.

Returns:

(Types::GetWebACLResponse) —
Returns a response object which responds to the following methods:
- #web_acl => Types::WebACL

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3921

def get_web_acl(params = {}, options = {})
  req = build_request(:get_web_acl, params)
  req.send_request(options)
end

#get_web_acl_for_resource(params = {}) ⇒ `Types::GetWebACLForResourceResponse`

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation. For more information, see [AWS WAF Classic] in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the web ACL for the specified resource, either an application load balancer or Amazon API Gateway stage.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.get_web_acl_for_resource({
  resource_arn: "ResourceArn", # required
})

Response structure


resp.web_acl_summary.web_acl_id #=> String
resp.web_acl_summary.name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —
The ARN (Amazon Resource Name) of the resource for which to get the web ACL, either an application load balancer or Amazon API Gateway stage.

The ARN should be in one of the following formats:
- For an Application Load Balancer: ‘arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id `
- For an Amazon API Gateway stage: ‘arn:aws:apigateway:region::/restapis/api-id/stages/stage-name `

Returns:

(Types::GetWebACLForResourceResponse) —
Returns a response object which responds to the following methods:
- #web_acl_summary => Types::WebACLSummary

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 3976

def get_web_acl_for_resource(params = {}, options = {})
  req = build_request(:get_web_acl_for_resource, params)
  req.send_request(options)
end

#get_xss_match_set(params = {}) ⇒ `Types::GetXssMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns the XssMatchSet that is specified by ‘XssMatchSetId`.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To get an XSS match set


# The following example returns the details of an XSS match set with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.get_xss_match_set({
  xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  xss_match_set: {
    name: "MySampleXssMatchSet", 
    xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    xss_match_tuples: [
      {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    ], 
  }, 
}

Request syntax with placeholder values


resp = client.get_xss_match_set({
  xss_match_set_id: "ResourceId", # required
})

Response structure


resp.xss_match_set.xss_match_set_id #=> String
resp.xss_match_set.name #=> String
resp.xss_match_set.xss_match_tuples #=> Array
resp.xss_match_set.xss_match_tuples[0].field_to_match.type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.xss_match_set.xss_match_tuples[0].field_to_match.data #=> String
resp.xss_match_set.xss_match_tuples[0].text_transformation #=> String, one of "NONE", "COMPRESS_WHITE_SPACE", "HTML_ENTITY_DECODE", "LOWERCASE", "CMD_LINE", "URL_DECODE"

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:xss_match_set_id (required, String) —

The ‘XssMatchSetId` of the XssMatchSet that you want to get. `XssMatchSetId` is returned by CreateXssMatchSet and by ListXssMatchSets.

Returns:

(Types::GetXssMatchSetResponse) —
Returns a response object which responds to the following methods:
- #xss_match_set => Types::XssMatchSet

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4050

def get_xss_match_set(params = {}, options = {})
  req = build_request(:get_xss_match_set, params)
  req.send_request(options)
end

#list_activated_rules_in_rule_group(params = {}) ⇒ `Types::ListActivatedRulesInRuleGroupResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of ActivatedRule objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_activated_rules_in_rule_group({
  rule_group_id: "ResourceId",
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.activated_rules #=> Array
resp.activated_rules[0].priority #=> Integer
resp.activated_rules[0].rule_id #=> String
resp.activated_rules[0].action.type #=> String, one of "BLOCK", "ALLOW", "COUNT"
resp.activated_rules[0].override_action.type #=> String, one of "NONE", "COUNT"
resp.activated_rules[0].type #=> String, one of "REGULAR", "RATE_BASED", "GROUP"
resp.activated_rules[0].excluded_rules #=> Array
resp.activated_rules[0].excluded_rules[0].rule_id #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_group_id (String) —

The ‘RuleGroupId` of the RuleGroup for which you want to get a list of ActivatedRule objects.
:next_marker (String) —

If you specify a value for ‘Limit` and you have more `ActivatedRules` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `ActivatedRules`. For the second and subsequent `ListActivatedRulesInRuleGroup` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `ActivatedRules`.
:limit (Integer) —

Specifies the number of ‘ActivatedRules` that you want AWS WAF to return for this request. If you have more `ActivatedRules` than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `ActivatedRules`.

Returns:

(Types::ListActivatedRulesInRuleGroupResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #activated_rules => Array<Types::ActivatedRule>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4119

def list_activated_rules_in_rule_group(params = {}, options = {})
  req = build_request(:list_activated_rules_in_rule_group, params)
  req.send_request(options)
end

#list_byte_match_sets(params = {}) ⇒ `Types::ListByteMatchSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of ByteMatchSetSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_byte_match_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.byte_match_sets #=> Array
resp.byte_match_sets[0].byte_match_set_id #=> String
resp.byte_match_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `ByteMatchSets` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `ByteMatchSets`. For the second and subsequent `ListByteMatchSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `ByteMatchSets`.
:limit (Integer) —

Specifies the number of ‘ByteMatchSet` objects that you want AWS WAF to return for this request. If you have more `ByteMatchSets` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `ByteMatchSet` objects.

Returns:

(Types::ListByteMatchSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #byte_match_sets => Array<Types::ByteMatchSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4178

def list_byte_match_sets(params = {}, options = {})
  req = build_request(:list_byte_match_sets, params)
  req.send_request(options)
end

#list_geo_match_sets(params = {}) ⇒ `Types::ListGeoMatchSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of GeoMatchSetSummary objects in the response.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_geo_match_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.geo_match_sets #=> Array
resp.geo_match_sets[0].geo_match_set_id #=> String
resp.geo_match_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `GeoMatchSet`s than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `GeoMatchSet` objects. For the second and subsequent `ListGeoMatchSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `GeoMatchSet` objects.
:limit (Integer) —

Specifies the number of ‘GeoMatchSet` objects that you want AWS WAF to return for this request. If you have more `GeoMatchSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `GeoMatchSet` objects.

Returns:

(Types::ListGeoMatchSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #geo_match_sets => Array<Types::GeoMatchSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4237

def list_geo_match_sets(params = {}, options = {})
  req = build_request(:list_geo_match_sets, params)
  req.send_request(options)
end

#list_ip_sets(params = {}) ⇒ `Types::ListIPSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of IPSetSummary objects in the response.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list IP sets


# The following example returns an array of up to 100 IP match sets.

resp = client.list_ip_sets({
  limit: 100, 
})

resp.to_h outputs the following:
{
  ip_sets: [
    {
      ip_set_id: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
      name: "MyIPSetFriendlyName", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_ip_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.ip_sets #=> Array
resp.ip_sets[0].ip_set_id #=> String
resp.ip_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

AWS WAF returns a ‘NextMarker` value in the response that allows you to list another group of `IPSets`. For the second and subsequent `ListIPSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `IPSets`.
:limit (Integer) —

Specifies the number of ‘IPSet` objects that you want AWS WAF to return for this request. If you have more `IPSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `IPSet` objects.

Returns:

(Types::ListIPSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #ip_sets => Array<Types::IPSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4312

def list_ip_sets(params = {}, options = {})
  req = build_request(:list_ip_sets, params)
  req.send_request(options)
end

#list_logging_configurations(params = {}) ⇒ `Types::ListLoggingConfigurationsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of LoggingConfiguration objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_logging_configurations({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.logging_configurations #=> Array
resp.logging_configurations[0].resource_arn #=> String
resp.logging_configurations[0].log_destination_configs #=> Array
resp.logging_configurations[0].log_destination_configs[0] #=> String
resp.logging_configurations[0].redacted_fields #=> Array
resp.logging_configurations[0].redacted_fields[0].type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.logging_configurations[0].redacted_fields[0].data #=> String
resp.next_marker #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `LoggingConfigurations` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `LoggingConfigurations`. For the second and subsequent `ListLoggingConfigurations` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `ListLoggingConfigurations`.
:limit (Integer) —

Specifies the number of ‘LoggingConfigurations` that you want AWS WAF to return for this request. If you have more `LoggingConfigurations` than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `LoggingConfigurations`.

Returns:

(Types::ListLoggingConfigurationsResponse) —
Returns a response object which responds to the following methods:
- #logging_configurations => Array<Types::LoggingConfiguration>
- #next_marker => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4376

def list_logging_configurations(params = {}, options = {})
  req = build_request(:list_logging_configurations, params)
  req.send_request(options)
end

#list_rate_based_rules(params = {}) ⇒ `Types::ListRateBasedRulesResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RuleSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_rate_based_rules({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.rules #=> Array
resp.rules[0].rule_id #=> String
resp.rules[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `Rules` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `Rules`. For the second and subsequent `ListRateBasedRules` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `Rules`.
:limit (Integer) —

Specifies the number of ‘Rules` that you want AWS WAF to return for this request. If you have more `Rules` than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `Rules`.

Returns:

(Types::ListRateBasedRulesResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #rules => Array<Types::RuleSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4434

def list_rate_based_rules(params = {}, options = {})
  req = build_request(:list_rate_based_rules, params)
  req.send_request(options)
end

#list_regex_match_sets(params = {}) ⇒ `Types::ListRegexMatchSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RegexMatchSetSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_regex_match_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.regex_match_sets #=> Array
resp.regex_match_sets[0].regex_match_set_id #=> String
resp.regex_match_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `RegexMatchSet` objects than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `ByteMatchSets`. For the second and subsequent `ListRegexMatchSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `RegexMatchSet` objects.
:limit (Integer) —

Specifies the number of ‘RegexMatchSet` objects that you want AWS WAF to return for this request. If you have more `RegexMatchSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `RegexMatchSet` objects.

Returns:

(Types::ListRegexMatchSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #regex_match_sets => Array<Types::RegexMatchSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4493

def list_regex_match_sets(params = {}, options = {})
  req = build_request(:list_regex_match_sets, params)
  req.send_request(options)
end

#list_regex_pattern_sets(params = {}) ⇒ `Types::ListRegexPatternSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RegexPatternSetSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_regex_pattern_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.regex_pattern_sets #=> Array
resp.regex_pattern_sets[0].regex_pattern_set_id #=> String
resp.regex_pattern_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `RegexPatternSet` objects than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `RegexPatternSet` objects. For the second and subsequent `ListRegexPatternSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `RegexPatternSet` objects.
:limit (Integer) —

Specifies the number of ‘RegexPatternSet` objects that you want AWS WAF to return for this request. If you have more `RegexPatternSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `RegexPatternSet` objects.

Returns:

(Types::ListRegexPatternSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #regex_pattern_sets => Array<Types::RegexPatternSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4553

def list_regex_pattern_sets(params = {}, options = {})
  req = build_request(:list_regex_pattern_sets, params)
  req.send_request(options)
end

#list_resources_for_web_acl(params = {}) ⇒ `Types::ListResourcesForWebACLResponse`

<note markdown=“1”> This is **AWS WAF Classic Regional** documentation. For more information, see [AWS WAF Classic] in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of resources associated with the specified web ACL.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_resources_for_web_acl({
  web_acl_id: "ResourceId", # required
  resource_type: "APPLICATION_LOAD_BALANCER", # accepts APPLICATION_LOAD_BALANCER, API_GATEWAY
})

Response structure


resp.resource_arns #=> Array
resp.resource_arns[0] #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The unique identifier (ID) of the web ACL for which to list the associated resources.
:resource_type (String) —

The type of resource to list, either an application load balancer or Amazon API Gateway.

Returns:

(Types::ListResourcesForWebACLResponse) —
Returns a response object which responds to the following methods:
- #resource_arns => Array<String>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4602

def list_resources_for_web_acl(params = {}, options = {})
  req = build_request(:list_resources_for_web_acl, params)
  req.send_request(options)
end

#list_rule_groups(params = {}) ⇒ `Types::ListRuleGroupsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RuleGroup objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_rule_groups({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.rule_groups #=> Array
resp.rule_groups[0].rule_group_id #=> String
resp.rule_groups[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `RuleGroups` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `RuleGroups`. For the second and subsequent `ListRuleGroups` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `RuleGroups`.
:limit (Integer) —

Specifies the number of ‘RuleGroups` that you want AWS WAF to return for this request. If you have more `RuleGroups` than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `RuleGroups`.

Returns:

(Types::ListRuleGroupsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #rule_groups => Array<Types::RuleGroupSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4660

def list_rule_groups(params = {}, options = {})
  req = build_request(:list_rule_groups, params)
  req.send_request(options)
end

#list_rules(params = {}) ⇒ `Types::ListRulesResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RuleSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list rules


# The following example returns an array of up to 100 rules.

resp = client.list_rules({
  limit: 100, 
})

resp.to_h outputs the following:
{
  rules: [
    {
      name: "WAFByteHeaderRule", 
      rule_id: "WAFRule-1-Example", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_rules({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.rules #=> Array
resp.rules[0].rule_id #=> String
resp.rules[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `Rules` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `Rules`. For the second and subsequent `ListRules` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `Rules`.
:limit (Integer) —

Specifies the number of ‘Rules` that you want AWS WAF to return for this request. If you have more `Rules` than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `Rules`.

Returns:

(Types::ListRulesResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #rules => Array<Types::RuleSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4737

def list_rules(params = {}, options = {})
  req = build_request(:list_rules, params)
  req.send_request(options)
end

#list_size_constraint_sets(params = {}) ⇒ `Types::ListSizeConstraintSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of SizeConstraintSetSummary objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list a size constraint sets


# The following example returns an array of up to 100 size contraint match sets.

resp = client.list_size_constraint_sets({
  limit: 100, 
})

resp.to_h outputs the following:
{
  size_constraint_sets: [
    {
      name: "MySampleSizeConstraintSet", 
      size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_size_constraint_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.size_constraint_sets #=> Array
resp.size_constraint_sets[0].size_constraint_set_id #=> String
resp.size_constraint_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `SizeConstraintSets` than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `SizeConstraintSets`. For the second and subsequent `ListSizeConstraintSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `SizeConstraintSets`.
:limit (Integer) —

Specifies the number of ‘SizeConstraintSet` objects that you want AWS WAF to return for this request. If you have more `SizeConstraintSets` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `SizeConstraintSet` objects.

Returns:

(Types::ListSizeConstraintSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #size_constraint_sets => Array<Types::SizeConstraintSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4816

def list_size_constraint_sets(params = {}, options = {})
  req = build_request(:list_size_constraint_sets, params)
  req.send_request(options)
end

#list_sql_injection_match_sets(params = {}) ⇒ `Types::ListSqlInjectionMatchSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of SqlInjectionMatchSet objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list SQL injection match sets


# The following example returns an array of up to 100 SQL injection match sets.

resp = client.list_sql_injection_match_sets({
  limit: 100, 
})

resp.to_h outputs the following:
{
  sql_injection_match_sets: [
    {
      name: "MySQLInjectionMatchSet", 
      sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_sql_injection_match_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.sql_injection_match_sets #=> Array
resp.sql_injection_match_sets[0].sql_injection_match_set_id #=> String
resp.sql_injection_match_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more SqlInjectionMatchSet objects than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `SqlInjectionMatchSets`. For the second and subsequent `ListSqlInjectionMatchSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `SqlInjectionMatchSets`.
:limit (Integer) —

Specifies the number of SqlInjectionMatchSet objects that you want AWS WAF to return for this request. If you have more ‘SqlInjectionMatchSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `Rules`.

Returns:

(Types::ListSqlInjectionMatchSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #sql_injection_match_sets => Array<Types::SqlInjectionMatchSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4895

def list_sql_injection_match_sets(params = {}, options = {})
  req = build_request(:list_sql_injection_match_sets, params)
  req.send_request(options)
end

#list_subscribed_rule_groups(params = {}) ⇒ `Types::ListSubscribedRuleGroupsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of RuleGroup objects that you are subscribed to.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_subscribed_rule_groups({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.rule_groups #=> Array
resp.rule_groups[0].rule_group_id #=> String
resp.rule_groups[0].name #=> String
resp.rule_groups[0].metric_name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `ByteMatchSets`subscribed rule groups than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of subscribed rule groups. For the second and subsequent `ListSubscribedRuleGroupsRequest` requests, specify the value of `NextMarker` from the previous response to get information about another batch of subscribed rule groups.
:limit (Integer) —

Specifies the number of subscribed rule groups that you want AWS WAF to return for this request. If you have more objects than the number you specify for ‘Limit`, the response includes a `NextMarker` value that you can use to get another batch of objects.

Returns:

(Types::ListSubscribedRuleGroupsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #rule_groups => Array<Types::SubscribedRuleGroupSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 4955

def list_subscribed_rule_groups(params = {}, options = {})
  req = build_request(:list_subscribed_rule_groups, params)
  req.send_request(options)
end

#list_tags_for_resource(params = {}) ⇒ `Types::ListTagsForResourceResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Retrieves the tags associated with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to “customer” and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.

Tagging is only available through the API, SDKs, and CLI. You can’t manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.list_tags_for_resource({
  next_marker: "NextMarker",
  limit: 1,
  resource_arn: "ResourceArn", # required
})

Response structure


resp.next_marker #=> String
resp.tag_info_for_resource.resource_arn #=> String
resp.tag_info_for_resource.tag_list #=> Array
resp.tag_info_for_resource.tag_list[0].key #=> String
resp.tag_info_for_resource.tag_list[0].value #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String)
:limit (Integer)
:resource_arn (required, String)

Returns:

(Types::ListTagsForResourceResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #tag_info_for_resource => Types::TagInfoForResource

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5017

def list_tags_for_resource(params = {}, options = {})
  req = build_request(:list_tags_for_resource, params)
  req.send_request(options)
end

#list_web_acls(params = {}) ⇒ `Types::ListWebACLsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of WebACLSummary objects in the response.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list Web ACLs


# The following example returns an array of up to 100 web ACLs.

resp = client.list_web_acls({
  limit: 100, 
})

resp.to_h outputs the following:
{
  web_acls: [
    {
      name: "WebACLexample", 
      web_acl_id: "webacl-1472061481310", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_web_acls({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.web_acls #=> Array
resp.web_acls[0].web_acl_id #=> String
resp.web_acls[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more `WebACL` objects than the number that you specify for `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `WebACL` objects. For the second and subsequent `ListWebACLs` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `WebACL` objects.
:limit (Integer) —

Specifies the number of ‘WebACL` objects that you want AWS WAF to return for this request. If you have more `WebACL` objects than the number that you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `WebACL` objects.

Returns:

(Types::ListWebACLsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #web_acls => Array<Types::WebACLSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5095

def list_web_acls(params = {}, options = {})
  req = build_request(:list_web_acls, params)
  req.send_request(options)
end

#list_xss_match_sets(params = {}) ⇒ `Types::ListXssMatchSetsResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Returns an array of XssMatchSet objects.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Example: To list XSS match sets


# The following example returns an array of up to 100 XSS match sets.

resp = client.list_xss_match_sets({
  limit: 100, 
})

resp.to_h outputs the following:
{
  xss_match_sets: [
    {
      name: "MySampleXssMatchSet", 
      xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_xss_match_sets({
  next_marker: "NextMarker",
  limit: 1,
})

Response structure


resp.next_marker #=> String
resp.xss_match_sets #=> Array
resp.xss_match_sets[0].xss_match_set_id #=> String
resp.xss_match_sets[0].name #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:next_marker (String) —

If you specify a value for ‘Limit` and you have more XssMatchSet objects than the value of `Limit`, AWS WAF returns a `NextMarker` value in the response that allows you to list another group of `XssMatchSets`. For the second and subsequent `ListXssMatchSets` requests, specify the value of `NextMarker` from the previous response to get information about another batch of `XssMatchSets`.
:limit (Integer) —

Specifies the number of XssMatchSet objects that you want AWS WAF to return for this request. If you have more ‘XssMatchSet` objects than the number you specify for `Limit`, the response includes a `NextMarker` value that you can use to get another batch of `Rules`.

Returns:

(Types::ListXssMatchSetsResponse) —
Returns a response object which responds to the following methods:
- #next_marker => String
- #xss_match_sets => Array<Types::XssMatchSetSummary>

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5172

def list_xss_match_sets(params = {}, options = {})
  req = build_request(:list_xss_match_sets, params)
  req.send_request(options)
end

#put_logging_configuration(params = {}) ⇒ `Types::PutLoggingConfigurationResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Associates a LoggingConfiguration with a specified web ACL.

You can access information about all traffic that AWS WAF inspects using the following steps:

Create an Amazon Kinesis Data Firehose.

Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia).

<note markdown=“1”> Do not create the data firehose using a ‘Kinesis stream` as your source.
```
</note>
```
Associate that firehose to your web ACL using a ‘PutLoggingConfiguration` request.

When you successfully enable logging using a ‘PutLoggingConfiguration` request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see [Logging Web ACL Traffic Information] in the *AWS WAF Developer Guide*.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/logging.html

Examples:

Request syntax with placeholder values


resp = client.put_logging_configuration({
  logging_configuration: { # required
    resource_arn: "ResourceArn", # required
    log_destination_configs: ["ResourceArn"], # required
    redacted_fields: [
      {
        type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
        data: "MatchFieldData",
      },
    ],
  },
})

Response structure


resp.logging_configuration.resource_arn #=> String
resp.logging_configuration.log_destination_configs #=> Array
resp.logging_configuration.log_destination_configs[0] #=> String
resp.logging_configuration.redacted_fields #=> Array
resp.logging_configuration.redacted_fields[0].type #=> String, one of "URI", "QUERY_STRING", "HEADER", "METHOD", "BODY", "SINGLE_QUERY_ARG", "ALL_QUERY_ARGS"
resp.logging_configuration.redacted_fields[0].data #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:logging_configuration (required, Types::LoggingConfiguration) —
The Amazon Kinesis Data Firehose that contains the inspected traffic information, the redacted fields details, and the Amazon Resource Name (ARN) of the web ACL to monitor.

<note markdown=“1”> When specifying ‘Type` in `RedactedFields`, you must use one of the following values: `URI`, `QUERY_STRING`, `HEADER`, or `METHOD`.
```
</note>
```

Returns:

(Types::PutLoggingConfigurationResponse) —
Returns a response object which responds to the following methods:
- #logging_configuration => Types::LoggingConfiguration

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5259

def put_logging_configuration(params = {}, options = {})
  req = build_request(:put_logging_configuration, params)
  req.send_request(options)
end

#put_permission_policy(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Attaches an IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts.

The ‘PutPermissionPolicy` is subject to the following restrictions:

You can attach only one policy with each ‘PutPermissionPolicy` request.
The policy must include an ‘Effect`, `Action` and `Principal`.
‘Effect` must specify `Allow`.
The ‘Action` in the policy must be `waf:UpdateWebACL`, `waf-regional:UpdateWebACL`, `waf:GetRuleGroup` and `waf-regional:GetRuleGroup` . Any extra or wildcard actions in the policy will be rejected.
The policy cannot include a ‘Resource` parameter.
The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region.
The user making the request must be the owner of the RuleGroup.
Your policy must be composed using IAM Policy version 2012-10-17.

For more information, see [IAM Policies].

An example of a valid policy parameter is shown in the Examples section below.

Examples:

Request syntax with placeholder values


resp = client.put_permission_policy({
  resource_arn: "ResourceArn", # required
  policy: "PolicyString", # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String) —

The Amazon Resource Name (ARN) of the RuleGroup to which you want to attach the policy.
:policy (required, String) —

The policy to attach to the specified RuleGroup.

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5330

def put_permission_policy(params = {}, options = {})
  req = build_request(:put_permission_policy, params)
  req.send_request(options)
end

#tag_resource(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Associates tags with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to “customer” and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.

Tagging is only available through the API, SDKs, and CLI. You can’t manage or view tags through the AWS WAF Classic console. You can use this action to tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.tag_resource({
  resource_arn: "ResourceArn", # required
  tags: [ # required
    {
      key: "TagKey", # required
      value: "TagValue", # required
    },
  ],
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String)
:tags (required, Array<Types::Tag>)

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5383

def tag_resource(params = {}, options = {})
  req = build_request(:tag_resource, params)
  req.send_request(options)
end

#untag_resource(params = {}) ⇒ `Struct`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.untag_resource({
  resource_arn: "ResourceArn", # required
  tag_keys: ["TagKey"], # required
})

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:resource_arn (required, String)
:tag_keys (required, Array<String>)

Returns:

(Struct) —

Returns an empty response.

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5421

def untag_resource(params = {}, options = {})
  req = build_request(:untag_resource, params)
  req.send_request(options)
end

#update_byte_match_set(params = {}) ⇒ `Types::UpdateByteMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each ‘ByteMatchTuple` object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change a ‘ByteMatchSetUpdate` object, you delete the existing object and add a new one.
The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the ‘User-Agent` header.
The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see ‘TargetString` in the ByteMatchTuple data type.
Where to look, such as at the beginning or the end of a query string.
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.

For example, you can add a ‘ByteMatchSetUpdate` object that matches web requests in which `User-Agent` headers contain the string `BadBot`. You can then configure AWS WAF to block those requests.

To create and configure a ‘ByteMatchSet`, perform the following steps:

Create a ‘ByteMatchSet.` For more information, see CreateByteMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an `UpdateByteMatchSet` request.
Submit an ‘UpdateByteMatchSet` request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update a byte match set


# The following example deletes a ByteMatchTuple object (filters) in an byte match set with the ID
# exampleIDs3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_byte_match_set({
  byte_match_set_id: "exampleIDs3t-46da-4fdb-b8d5-abc321j569j5", 
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  updates: [
    {
      action: "DELETE", 
      byte_match_tuple: {
        field_to_match: {
          data: "referer", 
          type: "HEADER", 
        }, 
        positional_constraint: "CONTAINS", 
        target_string: "badrefer1", 
        text_transformation: "NONE", 
      }, 
    }, 
  ], 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_byte_match_set({
  byte_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      byte_match_tuple: { # required
        field_to_match: { # required
          type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
          data: "MatchFieldData",
        },
        target_string: "data", # required
        text_transformation: "NONE", # required, accepts NONE, COMPRESS_WHITE_SPACE, HTML_ENTITY_DECODE, LOWERCASE, CMD_LINE, URL_DECODE
        positional_constraint: "EXACTLY", # required, accepts EXACTLY, STARTS_WITH, ENDS_WITH, CONTAINS, CONTAINS_WORD
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:byte_match_set_id (required, String) —

The ‘ByteMatchSetId` of the ByteMatchSet that you want to update. `ByteMatchSetId` is returned by CreateByteMatchSet and by ListByteMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::ByteMatchSetUpdate>) —
An array of ‘ByteMatchSetUpdate` objects that you want to insert into or delete from a ByteMatchSet. For more information, see the applicable data types:
- ByteMatchSetUpdate: Contains ‘Action` and `ByteMatchTuple`
- ByteMatchTuple: Contains ‘FieldToMatch`, `PositionalConstraint`, `TargetString`, and `TextTransformation`
- FieldToMatch: Contains ‘Data` and `Type`

Returns:

(Types::UpdateByteMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5565

def update_byte_match_set(params = {}, options = {})
  req = build_request(:update_byte_match_set, params)
  req.send_request(options)
end

#update_geo_match_set(params = {}) ⇒ `Types::UpdateGeoMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes GeoMatchConstraint objects in an ‘GeoMatchSet`. For each `GeoMatchConstraint` object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change an ‘GeoMatchConstraint` object, you delete the existing object and add a new one.
The ‘Type`. The only valid value for `Type` is `Country`.
The ‘Value`, which is a two character code for the country to add to the `GeoMatchConstraint` object. Valid codes are listed in GeoMatchConstraint$Value.

To create and configure an ‘GeoMatchSet`, perform the following steps:

Submit a CreateGeoMatchSet request.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an UpdateGeoMatchSet request.
Submit an ‘UpdateGeoMatchSet` request to specify the country that you want AWS WAF to watch for.

When you update an ‘GeoMatchSet`, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.update_geo_match_set({
  geo_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      geo_match_constraint: { # required
        type: "Country", # required, accepts Country
        value: "AF", # required, accepts AF, AX, AL, DZ, AS, AD, AO, AI, AQ, AG, AR, AM, AW, AU, AT, AZ, BS, BH, BD, BB, BY, BE, BZ, BJ, BM, BT, BO, BQ, BA, BW, BV, BR, IO, BN, BG, BF, BI, KH, CM, CA, CV, KY, CF, TD, CL, CN, CX, CC, CO, KM, CG, CD, CK, CR, CI, HR, CU, CW, CY, CZ, DK, DJ, DM, DO, EC, EG, SV, GQ, ER, EE, ET, FK, FO, FJ, FI, FR, GF, PF, TF, GA, GM, GE, DE, GH, GI, GR, GL, GD, GP, GU, GT, GG, GN, GW, GY, HT, HM, VA, HN, HK, HU, IS, IN, ID, IR, IQ, IE, IM, IL, IT, JM, JP, JE, JO, KZ, KE, KI, KP, KR, KW, KG, LA, LV, LB, LS, LR, LY, LI, LT, LU, MO, MK, MG, MW, MY, MV, ML, MT, MH, MQ, MR, MU, YT, MX, FM, MD, MC, MN, ME, MS, MA, MZ, MM, NA, NR, NP, NL, NC, NZ, NI, NE, NG, NU, NF, MP, NO, OM, PK, PW, PS, PA, PG, PY, PE, PH, PN, PL, PT, PR, QA, RE, RO, RU, RW, BL, SH, KN, LC, MF, PM, VC, WS, SM, ST, SA, SN, RS, SC, SL, SG, SX, SK, SI, SB, SO, ZA, GS, SS, ES, LK, SD, SR, SJ, SZ, SE, CH, SY, TW, TJ, TZ, TH, TL, TG, TK, TO, TT, TN, TR, TM, TC, TV, UG, UA, AE, GB, US, UM, UY, UZ, VU, VE, VN, VG, VI, WF, EH, YE, ZM, ZW
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:geo_match_set_id (required, String) —

The ‘GeoMatchSetId` of the GeoMatchSet that you want to update. `GeoMatchSetId` is returned by CreateGeoMatchSet and by ListGeoMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::GeoMatchSetUpdate>) —
An array of ‘GeoMatchSetUpdate` objects that you want to insert into or delete from an GeoMatchSet. For more information, see the applicable data types:
- GeoMatchSetUpdate: Contains ‘Action` and `GeoMatchConstraint`
- GeoMatchConstraint: Contains ‘Type` and `Value`
  
  You can have only one ‘Type` and `Value` per `GeoMatchConstraint`. To add multiple countries, include multiple `GeoMatchSetUpdate` objects in your request.

Returns:

(Types::UpdateGeoMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5664

def update_geo_match_set(params = {}, options = {})
  req = build_request(:update_geo_match_set, params)
  req.send_request(options)
end

#update_ip_set(params = {}) ⇒ `Types::UpdateIPSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes IPSetDescriptor objects in an ‘IPSet`. For each `IPSetDescriptor` object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change an ‘IPSetDescriptor` object, you delete the existing object and add a new one.
The IP address version, ‘IPv4` or `IPv6`.
The IP address in CIDR notation, for example, ‘192.0.2.0/24` (for the range of IP addresses from `192.0.2.0` to `192.0.2.255`) or `192.0.2.44/32` (for the individual IP address `192.0.2.44`).

AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry [Classless Inter-Domain Routing].

IPv6 addresses can be represented using any of the following formats:

1111:0000:0000:0000:0000:0000:0000:0111/128
1111:0:0:0:0:0:0:0111/128
1111::0111/128
1111::111/128

You use an ‘IPSet` to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you’re receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an ‘IPSet` that specifies those IP addresses, and then configure AWS WAF to block the requests.

To create and configure an ‘IPSet`, perform the following steps:

Submit a CreateIPSet request.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an UpdateIPSet request.
Submit an ‘UpdateIPSet` request to specify the IP addresses that you want AWS WAF to watch for.

When you update an ‘IPSet`, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one.

You can insert a maximum of 1000 addresses in a single request.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: en.wikipedia.org/wiki/Classless_Inter-Domain_Routing [4]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update an IP set


# The following example deletes an IPSetDescriptor object in an IP match set with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_ip_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  ip_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
  updates: [
    {
      action: "DELETE", 
      ip_set_descriptor: {
        type: "IPV4", 
        value: "192.0.2.44/32", 
      }, 
    }, 
  ], 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_ip_set({
  ip_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      ip_set_descriptor: { # required
        type: "IPV4", # required, accepts IPV4, IPV6
        value: "IPSetDescriptorValue", # required
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:ip_set_id (required, String) —

The ‘IPSetId` of the IPSet that you want to update. `IPSetId` is returned by CreateIPSet and by ListIPSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::IPSetUpdate>) —
An array of ‘IPSetUpdate` objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:
- IPSetUpdate: Contains ‘Action` and `IPSetDescriptor`
- IPSetDescriptor: Contains ‘Type` and `Value`
You can insert a maximum of 1000 addresses in a single request.

Returns:

(Types::UpdateIPSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5811

def update_ip_set(params = {}, options = {})
  req = build_request(:update_ip_set, params)
  req.send_request(options)
end

#update_rate_based_rule(params = {}) ⇒ `Types::UpdateRateBasedRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes Predicate objects in a rule and updates the ‘RateLimit` in the rule.

Each ‘Predicate` object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The `RateLimit` specifies the number of requests every five minutes that triggers the rule.

If you add more than one predicate to a ‘RateBasedRule`, a request must match all the predicates and exceed the `RateLimit` to be counted or blocked. For example, suppose you add the following to a `RateBasedRule`:

An ‘IPSet` that matches the IP address `192.0.2.44/32`
A ‘ByteMatchSet` that matches `BadBot` in the `User-Agent` header

Further, you specify a ‘RateLimit` of 1,000.

You then add the ‘RateBasedRule` to a `WebACL` and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the `User-Agent` header in the request must contain the value `BadBot`. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests.

As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a ‘RateBasedRule`:

A ‘ByteMatchSet` with `FieldToMatch` of `URI`
A ‘PositionalConstraint` of `STARTS_WITH`
A ‘TargetString` of `login`

Further, you specify a ‘RateLimit` of 1,000.

By adding this ‘RateBasedRule` to a `WebACL`, you could limit requests to your login page without affecting the rest of your site.

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html

Examples:

Request syntax with placeholder values


resp = client.update_rate_based_rule({
  rule_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      predicate: { # required
        negated: false, # required
        type: "IPMatch", # required, accepts IPMatch, ByteMatch, SqlInjectionMatch, GeoMatch, SizeConstraint, XssMatch, RegexMatch
        data_id: "ResourceId", # required
      },
    },
  ],
  rate_limit: 1, # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the `RateBasedRule` that you want to update. `RuleId` is returned by `CreateRateBasedRule` and by ListRateBasedRules.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::RuleUpdate>) —

An array of ‘RuleUpdate` objects that you want to insert into or delete from a RateBasedRule.
:rate_limit (required, Integer) —

The maximum number of requests, which have an identical value in the field specified by the ‘RateKey`, allowed in a five-minute period. If the number of requests exceeds the `RateLimit` and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.

Returns:

(Types::UpdateRateBasedRuleResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 5920

def update_rate_based_rule(params = {}, options = {})
  req = build_request(:update_rate_based_rule, params)
  req.send_request(options)
end

#update_regex_match_set(params = {}) ⇒ `Types::UpdateRegexMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each ‘RegexMatchSetUpdate` object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change a ‘RegexMatchSetUpdate` object, you delete the existing object and add a new one.
The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the ‘User-Agent` header.
The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.

For example, you can create a ‘RegexPatternSet` that matches any requests with `User-Agent` headers that contain the string `B[a@]dBt`. You can then configure AWS WAF to reject those requests.

To create and configure a ‘RegexMatchSet`, perform the following steps:

Create a ‘RegexMatchSet.` For more information, see CreateRegexMatchSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an `UpdateRegexMatchSet` request.
Submit an ‘UpdateRegexMatchSet` request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of the `RegexPatternSet` that contain the regular expression patters you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.update_regex_match_set({
  regex_match_set_id: "ResourceId", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      regex_match_tuple: { # required
        field_to_match: { # required
          type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
          data: "MatchFieldData",
        },
        text_transformation: "NONE", # required, accepts NONE, COMPRESS_WHITE_SPACE, HTML_ENTITY_DECODE, LOWERCASE, CMD_LINE, URL_DECODE
        regex_pattern_set_id: "ResourceId", # required
      },
    },
  ],
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_match_set_id (required, String) —

The ‘RegexMatchSetId` of the RegexMatchSet that you want to update. `RegexMatchSetId` is returned by CreateRegexMatchSet and by ListRegexMatchSets.
:updates (required, Array<Types::RegexMatchSetUpdate>) —

An array of ‘RegexMatchSetUpdate` objects that you want to insert into or delete from a RegexMatchSet. For more information, see RegexMatchTuple.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::UpdateRegexMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6026

def update_regex_match_set(params = {}, options = {})
  req = build_request(:update_regex_match_set, params)
  req.send_request(options)
end

#update_regex_pattern_set(params = {}) ⇒ `Types::UpdateRegexPatternSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes ‘RegexPatternString` objects in a RegexPatternSet. For each `RegexPatternString` object, you specify the following values:

Whether to insert or delete the ‘RegexPatternString`.
The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet.

For example, you can create a ‘RegexPatternString` such as `B[a@]dBt`. AWS WAF will match this `RegexPatternString` to:

BadBot
BadB0t
B@dBot
B@dB0t

To create and configure a ‘RegexPatternSet`, perform the following steps:

Create a ‘RegexPatternSet.` For more information, see CreateRegexPatternSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an `UpdateRegexPatternSet` request.
Submit an ‘UpdateRegexPatternSet` request to specify the regular expression pattern that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.update_regex_pattern_set({
  regex_pattern_set_id: "ResourceId", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      regex_pattern_string: "RegexPatternString", # required
    },
  ],
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:regex_pattern_set_id (required, String) —

The ‘RegexPatternSetId` of the RegexPatternSet that you want to update. `RegexPatternSetId` is returned by CreateRegexPatternSet and by ListRegexPatternSets.
:updates (required, Array<Types::RegexPatternSetUpdate>) —

An array of ‘RegexPatternSetUpdate` objects that you want to insert into or delete from a RegexPatternSet.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::UpdateRegexPatternSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6118

def update_regex_pattern_set(params = {}, options = {})
  req = build_request(:update_regex_pattern_set, params)
  req.send_request(options)
end

#update_rule(params = {}) ⇒ `Types::UpdateRuleResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes Predicate objects in a ‘Rule`. Each `Predicate` object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to a `Rule`, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to a `Rule`:

A ‘ByteMatchSet` that matches the value `BadBot` in the `User-Agent` header
An ‘IPSet` that matches the IP address `192.0.2.44`

You then add the ‘Rule` to a `WebACL` and specify that you want to block requests that satisfy the `Rule`. For a request to be blocked, the `User-Agent` header in the request must contain the value `BadBot` and the request must originate from the IP address 192.0.2.44.

To create and configure a ‘Rule`, perform the following steps:

Create and update the predicates that you want to include in the ‘Rule`.
Create the ‘Rule`. See CreateRule.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateRule request.
Submit an ‘UpdateRule` request to add predicates to the `Rule`.
Create and update a ‘WebACL` that contains the `Rule`. See CreateWebACL.

If you want to replace one ‘ByteMatchSet` or `IPSet` with another, you delete the existing one and add the new one.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update a rule


# The following example deletes a Predicate object in a rule with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_rule({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  rule_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
  updates: [
    {
      action: "DELETE", 
      predicate: {
        data_id: "MyByteMatchSetID", 
        negated: false, 
        type: "ByteMatch", 
      }, 
    }, 
  ], 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_rule({
  rule_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      predicate: { # required
        negated: false, # required
        type: "IPMatch", # required, accepts IPMatch, ByteMatch, SqlInjectionMatch, GeoMatch, SizeConstraint, XssMatch, RegexMatch
        data_id: "ResourceId", # required
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_id (required, String) —

The ‘RuleId` of the `Rule` that you want to update. `RuleId` is returned by `CreateRule` and by ListRules.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::RuleUpdate>) —
An array of ‘RuleUpdate` objects that you want to insert into or delete from a Rule. For more information, see the applicable data types:
- RuleUpdate: Contains ‘Action` and `Predicate`
- Predicate: Contains ‘DataId`, `Negated`, and `Type`
- FieldToMatch: Contains ‘Data` and `Type`

Returns:

(Types::UpdateRuleResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6248

def update_rule(params = {}, options = {})
  req = build_request(:update_rule, params)
  req.send_request(options)
end

#update_rule_group(params = {}) ⇒ `Types::UpdateRuleGroupResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes ActivatedRule objects in a ‘RuleGroup`.

You can only insert ‘REGULAR` rules into a rule group.

You can have a maximum of ten rules per rule group.

To create and configure a ‘RuleGroup`, perform the following steps:

Create and update the ‘Rules` that you want to include in the `RuleGroup`. See CreateRule.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateRuleGroup request.
Submit an ‘UpdateRuleGroup` request to add `Rules` to the `RuleGroup`.
Create and update a ‘WebACL` that contains the `RuleGroup`. See CreateWebACL.

If you want to replace one ‘Rule` with another, you delete the existing one and add the new one.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Request syntax with placeholder values


resp = client.update_rule_group({
  rule_group_id: "ResourceId", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      activated_rule: { # required
        priority: 1, # required
        rule_id: "ResourceId", # required
        action: {
          type: "BLOCK", # required, accepts BLOCK, ALLOW, COUNT
        },
        override_action: {
          type: "NONE", # required, accepts NONE, COUNT
        },
        type: "REGULAR", # accepts REGULAR, RATE_BASED, GROUP
        excluded_rules: [
          {
            rule_id: "ResourceId", # required
          },
        ],
      },
    },
  ],
  change_token: "ChangeToken", # required
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:rule_group_id (required, String) —

The ‘RuleGroupId` of the RuleGroup that you want to update. `RuleGroupId` is returned by CreateRuleGroup and by ListRuleGroups.
:updates (required, Array<Types::RuleGroupUpdate>) —

An array of ‘RuleGroupUpdate` objects that you want to insert into or delete from a RuleGroup.

You can only insert ‘REGULAR` rules into a rule group.

‘ActivatedRule|OverrideAction` applies only when updating or adding a `RuleGroup` to a `WebACL`. In this case you do not use `ActivatedRule|Action`. For all other update requests, `ActivatedRule|Action` is used instead of `ActivatedRule|OverrideAction`.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.

Returns:

(Types::UpdateRuleGroupResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6353

def update_rule_group(params = {}, options = {})
  req = build_request(:update_rule_group, params)
  req.send_request(options)
end

#update_size_constraint_set(params = {}) ⇒ `Types::UpdateSizeConstraintSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each ‘SizeConstraint` object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change a ‘SizeConstraintSetUpdate` object, you delete the existing object and add a new one.
The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the ‘User-Agent` header.
Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first ‘8192` bytes of your request to AWS WAF.

You can only specify a single type of TextTransformation.
A ‘ComparisonOperator` used for evaluating the selected part of the request against the specified `Size`, such as equals, greater than, less than, and so on.
The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation.

For example, you can add a ‘SizeConstraintSetUpdate` object that matches web requests in which the length of the `User-Agent` header is greater than 100 bytes. You can then configure AWS WAF to block those requests.

To create and configure a ‘SizeConstraintSet`, perform the following steps:

Create a ‘SizeConstraintSet.` For more information, see CreateSizeConstraintSet.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an `UpdateSizeConstraintSet` request.
Submit an ‘UpdateSizeConstraintSet` request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update a size constraint set


# The following example deletes a SizeConstraint object (filters) in a size constraint set with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_size_constraint_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  size_constraint_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
  updates: [
    {
      action: "DELETE", 
      size_constraint: {
        comparison_operator: "GT", 
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        size: 0, 
        text_transformation: "NONE", 
      }, 
    }, 
  ], 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_size_constraint_set({
  size_constraint_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      size_constraint: { # required
        field_to_match: { # required
          type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
          data: "MatchFieldData",
        },
        text_transformation: "NONE", # required, accepts NONE, COMPRESS_WHITE_SPACE, HTML_ENTITY_DECODE, LOWERCASE, CMD_LINE, URL_DECODE
        comparison_operator: "EQ", # required, accepts EQ, NE, LE, LT, GE, GT
        size: 1, # required
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:size_constraint_set_id (required, String) —

The ‘SizeConstraintSetId` of the SizeConstraintSet that you want to update. `SizeConstraintSetId` is returned by CreateSizeConstraintSet and by ListSizeConstraintSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::SizeConstraintSetUpdate>) —
An array of ‘SizeConstraintSetUpdate` objects that you want to insert into or delete from a SizeConstraintSet. For more information, see the applicable data types:
- SizeConstraintSetUpdate: Contains ‘Action` and `SizeConstraint`
- SizeConstraint: Contains ‘FieldToMatch`, `TextTransformation`, `ComparisonOperator`, and `Size`
- FieldToMatch: Contains ‘Data` and `Type`

Returns:

(Types::UpdateSizeConstraintSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6505

def update_size_constraint_set(params = {}, options = {})
  req = build_request(:update_size_constraint_set, params)
  req.send_request(options)
end

#update_sql_injection_match_set(params = {}) ⇒ `Types::UpdateSqlInjectionMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes SqlInjectionMatchTuple objects (filters) in a SqlInjectionMatchSet. For each ‘SqlInjectionMatchTuple` object, you specify the following values:

‘Action`: Whether to insert the object into or delete the object from the array. To change a `SqlInjectionMatchTuple`, you delete the existing object and add a new one.
‘FieldToMatch`: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.
‘TextTransformation`: Which text transformation, if any, to perform on the web request before inspecting the request for snippets of malicious SQL code.

You can only specify a single type of TextTransformation.

You use ‘SqlInjectionMatchSet` objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you’re receiving requests that contain snippets of SQL code in the query string and you want to block the requests, you can create a ‘SqlInjectionMatchSet` with the applicable settings, and then configure AWS WAF to block the requests.

To create and configure a ‘SqlInjectionMatchSet`, perform the following steps:

Submit a CreateSqlInjectionMatchSet request.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an UpdateIPSet request.
Submit an ‘UpdateSqlInjectionMatchSet` request to specify the parts of web requests that you want AWS WAF to inspect for snippets of SQL code.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update a SQL injection match set


# The following example deletes a SqlInjectionMatchTuple object (filters) in a SQL injection match set with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_sql_injection_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  sql_injection_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
  updates: [
    {
      action: "DELETE", 
      sql_injection_match_tuple: {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    }, 
  ], 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_sql_injection_match_set({
  sql_injection_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      sql_injection_match_tuple: { # required
        field_to_match: { # required
          type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
          data: "MatchFieldData",
        },
        text_transformation: "NONE", # required, accepts NONE, COMPRESS_WHITE_SPACE, HTML_ENTITY_DECODE, LOWERCASE, CMD_LINE, URL_DECODE
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:sql_injection_match_set_id (required, String) —

The ‘SqlInjectionMatchSetId` of the `SqlInjectionMatchSet` that you want to update. `SqlInjectionMatchSetId` is returned by CreateSqlInjectionMatchSet and by ListSqlInjectionMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::SqlInjectionMatchSetUpdate>) —
An array of ‘SqlInjectionMatchSetUpdate` objects that you want to insert into or delete from a SqlInjectionMatchSet. For more information, see the applicable data types:
- SqlInjectionMatchSetUpdate: Contains ‘Action` and `SqlInjectionMatchTuple`
- SqlInjectionMatchTuple: Contains ‘FieldToMatch` and `TextTransformation`
- FieldToMatch: Contains ‘Data` and `Type`

Returns:

(Types::UpdateSqlInjectionMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6644

def update_sql_injection_match_set(params = {}, options = {})
  req = build_request(:update_sql_injection_match_set, params)
  req.send_request(options)
end

#update_web_acl(params = {}) ⇒ `Types::UpdateWebACLResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes ActivatedRule objects in a ‘WebACL`. Each `Rule` identifies web requests that you want to allow, block, or count. When you update a `WebACL`, you specify the following values:

A default action for the ‘WebACL`, either `ALLOW` or `BLOCK`. AWS WAF performs the default action if a request doesn’t match the criteria in any of the ‘Rules` in a `WebACL`.
The ‘Rules` that you want to add or delete. If you want to replace one `Rule` with another, you delete the existing `Rule` and add the new one.
For each ‘Rule`, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in the `Rule`.
The order in which you want AWS WAF to evaluate the ‘Rules` in a `WebACL`. If you add more than one `Rule` to a `WebACL`, AWS WAF evaluates each request against the `Rules` in order based on the value of `Priority`. (The `Rule` that has the lowest value for `Priority` is evaluated first.) When a web request matches all the predicates (such as `ByteMatchSets` and `IPSets`) in a `Rule`, AWS WAF immediately takes the corresponding action, allow or block, and doesn’t evaluate the request against the remaining ‘Rules` in the `WebACL`, if any.

To create and configure a ‘WebACL`, perform the following steps:

Create and update the predicates that you want to include in ‘Rules`. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.
Create and update the ‘Rules` that you want to include in the `WebACL`. For more information, see CreateRule and UpdateRule.
Create a ‘WebACL`. See CreateWebACL.
Use ‘GetChangeToken` to get the change token that you provide in the `ChangeToken` parameter of an UpdateWebACL request.
Submit an ‘UpdateWebACL` request to specify the `Rules` that you want to include in the `WebACL`, to specify the default action, and to associate the `WebACL` with a CloudFront distribution.

The ‘ActivatedRule` can be a rule group. If you specify a rule group as your `ActivatedRule` , you can exclude specific rules from that rule group.

If you already have a rule group associated with a web ACL and want to submit an ‘UpdateWebACL` request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRule$ExcludedRules .

Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update a Web ACL


# The following example deletes an ActivatedRule object in a WebACL with the ID webacl-1472061481310.

resp = client.update_web_acl({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  default_action: {
    type: "ALLOW", 
  }, 
  updates: [
    {
      action: "DELETE", 
      activated_rule: {
        action: {
          type: "ALLOW", 
        }, 
        priority: 1, 
        rule_id: "WAFRule-1-Example", 
      }, 
    }, 
  ], 
  web_acl_id: "webacl-1472061481310", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_web_acl({
  web_acl_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      activated_rule: { # required
        priority: 1, # required
        rule_id: "ResourceId", # required
        action: {
          type: "BLOCK", # required, accepts BLOCK, ALLOW, COUNT
        },
        override_action: {
          type: "NONE", # required, accepts NONE, COUNT
        },
        type: "REGULAR", # accepts REGULAR, RATE_BASED, GROUP
        excluded_rules: [
          {
            rule_id: "ResourceId", # required
          },
        ],
      },
    },
  ],
  default_action: {
    type: "BLOCK", # required, accepts BLOCK, ALLOW, COUNT
  },
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:web_acl_id (required, String) —

The ‘WebACLId` of the WebACL that you want to update. `WebACLId` is returned by CreateWebACL and by ListWebACLs.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (Array<Types::WebACLUpdate>) —
An array of updates to make to the WebACL.

An array of ‘WebACLUpdate` objects that you want to insert into or delete from a WebACL. For more information, see the applicable data types:
- WebACLUpdate: Contains ‘Action` and `ActivatedRule`
- ActivatedRule: Contains ‘Action`, `OverrideAction`, `Priority`, `RuleId`, and `Type`. `ActivatedRule|OverrideAction` applies only when updating or adding a `RuleGroup` to a `WebACL`. In this case, you do not use `ActivatedRule|Action`. For all other update requests, `ActivatedRule|Action` is used instead of `ActivatedRule|OverrideAction`.
- WafAction: Contains ‘Type`
:default_action (Types::WafAction) —

A default action for the web ACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn’t match the criteria in any of the rules in a web ACL.

Returns:

(Types::UpdateWebACLResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6830

def update_web_acl(params = {}, options = {})
  req = build_request(:update_web_acl, params)
  req.send_request(options)
end

#update_xss_match_set(params = {}) ⇒ `Types::UpdateXssMatchSetResponse`

<note markdown=“1”> This is **AWS WAF Classic** documentation. For more information, see

AWS WAF Classic][1: in the developer guide.

**For the latest version of AWS WAF**, use the AWS WAFV2 API and see

the [AWS WAF Developer Guide]. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

</note>

Inserts or deletes XssMatchTuple objects (filters) in an XssMatchSet. For each ‘XssMatchTuple` object, you specify the following values:

‘Action`: Whether to insert the object into or delete the object from the array. To change an `XssMatchTuple`, you delete the existing object and add a new one.
‘FieldToMatch`: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter.
‘TextTransformation`: Which text transformation, if any, to perform on the web request before inspecting the request for cross-site scripting attacks.

You can only specify a single type of TextTransformation.

You use ‘XssMatchSet` objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you’re receiving requests that contain cross-site scripting attacks in the request body and you want to block the requests, you can create an ‘XssMatchSet` with the applicable settings, and then configure AWS WAF to block the requests.

To create and configure an ‘XssMatchSet`, perform the following steps:

Submit a CreateXssMatchSet request.
Use GetChangeToken to get the change token that you provide in the ‘ChangeToken` parameter of an UpdateIPSet request.
Submit an ‘UpdateXssMatchSet` request to specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the [AWS WAF Developer Guide].

[1]: docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html [2]: docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html [3]: docs.aws.amazon.com/waf/latest/developerguide/

Examples:

Example: To update an XSS match set


# The following example deletes an XssMatchTuple object (filters) in an XssMatchSet with the ID
# example1ds3t-46da-4fdb-b8d5-abc321j569j5.

resp = client.update_xss_match_set({
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
  updates: [
    {
      action: "DELETE", 
      xss_match_tuple: {
        field_to_match: {
          type: "QUERY_STRING", 
        }, 
        text_transformation: "URL_DECODE", 
      }, 
    }, 
  ], 
  xss_match_set_id: "example1ds3t-46da-4fdb-b8d5-abc321j569j5", 
})

resp.to_h outputs the following:
{
  change_token: "abcd12f2-46da-4fdb-b8d5-fbd4c466928f", 
}

Request syntax with placeholder values


resp = client.update_xss_match_set({
  xss_match_set_id: "ResourceId", # required
  change_token: "ChangeToken", # required
  updates: [ # required
    {
      action: "INSERT", # required, accepts INSERT, DELETE
      xss_match_tuple: { # required
        field_to_match: { # required
          type: "URI", # required, accepts URI, QUERY_STRING, HEADER, METHOD, BODY, SINGLE_QUERY_ARG, ALL_QUERY_ARGS
          data: "MatchFieldData",
        },
        text_transformation: "NONE", # required, accepts NONE, COMPRESS_WHITE_SPACE, HTML_ENTITY_DECODE, LOWERCASE, CMD_LINE, URL_DECODE
      },
    },
  ],
})

Response structure


resp.change_token #=> String

Parameters:

params (Hash) (defaults to: {}) —

({})

Options Hash (params):

:xss_match_set_id (required, String) —

The ‘XssMatchSetId` of the `XssMatchSet` that you want to update. `XssMatchSetId` is returned by CreateXssMatchSet and by ListXssMatchSets.
:change_token (required, String) —

The value returned by the most recent call to GetChangeToken.
:updates (required, Array<Types::XssMatchSetUpdate>) —
An array of ‘XssMatchSetUpdate` objects that you want to insert into or delete from an XssMatchSet. For more information, see the applicable data types:
- XssMatchSetUpdate: Contains ‘Action` and `XssMatchTuple`
- XssMatchTuple: Contains ‘FieldToMatch` and `TextTransformation`
- FieldToMatch: Contains ‘Data` and `Type`

Returns:

(Types::UpdateXssMatchSetResponse) —
Returns a response object which responds to the following methods:
- #change_token => String

See Also:

AWS API Documentation

# File 'lib/aws-sdk-wafregional/client.rb', line 6965

def update_xss_match_set(params = {}, options = {})
  req = build_request(:update_xss_match_set, params)
  req.send_request(options)
end

#waiter_names ⇒ `Object`

This method is part of a private API. You should avoid using this method if possible, as it may be removed or be changed in the future.

Deprecated.



6994
6995
6996

# File 'lib/aws-sdk-wafregional/client.rb', line 6994

def waiter_names
  []
end

Class: Aws::WAFRegional::Client

Overview

Class Attribute Summary collapse

API Operations collapse

Class Method Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(options) ⇒ Client

Class Attribute Details

.identifier ⇒ Object (readonly)

Class Method Details

.errors_module ⇒ Object

Instance Method Details

#associate_web_acl(params = {}) ⇒ Struct

#build_request(operation_name, params = {}) ⇒ Object

#create_byte_match_set(params = {}) ⇒ Types::CreateByteMatchSetResponse

#create_geo_match_set(params = {}) ⇒ Types::CreateGeoMatchSetResponse

#create_ip_set(params = {}) ⇒ Types::CreateIPSetResponse

#create_rate_based_rule(params = {}) ⇒ Types::CreateRateBasedRuleResponse

#create_regex_match_set(params = {}) ⇒ Types::CreateRegexMatchSetResponse

#create_regex_pattern_set(params = {}) ⇒ Types::CreateRegexPatternSetResponse

#create_rule(params = {}) ⇒ Types::CreateRuleResponse

#create_rule_group(params = {}) ⇒ Types::CreateRuleGroupResponse

#create_size_constraint_set(params = {}) ⇒ Types::CreateSizeConstraintSetResponse

#create_sql_injection_match_set(params = {}) ⇒ Types::CreateSqlInjectionMatchSetResponse

#create_web_acl(params = {}) ⇒ Types::CreateWebACLResponse

#create_web_acl_migration_stack(params = {}) ⇒ Types::CreateWebACLMigrationStackResponse

#create_xss_match_set(params = {}) ⇒ Types::CreateXssMatchSetResponse

#delete_byte_match_set(params = {}) ⇒ Types::DeleteByteMatchSetResponse

#delete_geo_match_set(params = {}) ⇒ Types::DeleteGeoMatchSetResponse

#delete_ip_set(params = {}) ⇒ Types::DeleteIPSetResponse

#delete_logging_configuration(params = {}) ⇒ Struct

#delete_permission_policy(params = {}) ⇒ Struct

#delete_rate_based_rule(params = {}) ⇒ Types::DeleteRateBasedRuleResponse

#delete_regex_match_set(params = {}) ⇒ Types::DeleteRegexMatchSetResponse

#delete_regex_pattern_set(params = {}) ⇒ Types::DeleteRegexPatternSetResponse

#delete_rule(params = {}) ⇒ Types::DeleteRuleResponse

#delete_rule_group(params = {}) ⇒ Types::DeleteRuleGroupResponse

#delete_size_constraint_set(params = {}) ⇒ Types::DeleteSizeConstraintSetResponse

#delete_sql_injection_match_set(params = {}) ⇒ Types::DeleteSqlInjectionMatchSetResponse

#delete_web_acl(params = {}) ⇒ Types::DeleteWebACLResponse

#delete_xss_match_set(params = {}) ⇒ Types::DeleteXssMatchSetResponse

#disassociate_web_acl(params = {}) ⇒ Struct

#get_byte_match_set(params = {}) ⇒ Types::GetByteMatchSetResponse

#get_change_token(params = {}) ⇒ Types::GetChangeTokenResponse

#get_change_token_status(params = {}) ⇒ Types::GetChangeTokenStatusResponse

#get_geo_match_set(params = {}) ⇒ Types::GetGeoMatchSetResponse

#get_ip_set(params = {}) ⇒ Types::GetIPSetResponse

#get_logging_configuration(params = {}) ⇒ Types::GetLoggingConfigurationResponse

#get_permission_policy(params = {}) ⇒ Types::GetPermissionPolicyResponse

#get_rate_based_rule(params = {}) ⇒ Types::GetRateBasedRuleResponse

#get_rate_based_rule_managed_keys(params = {}) ⇒ Types::GetRateBasedRuleManagedKeysResponse

#get_regex_match_set(params = {}) ⇒ Types::GetRegexMatchSetResponse

#get_regex_pattern_set(params = {}) ⇒ Types::GetRegexPatternSetResponse

#get_rule(params = {}) ⇒ Types::GetRuleResponse

#get_rule_group(params = {}) ⇒ Types::GetRuleGroupResponse

#get_sampled_requests(params = {}) ⇒ Types::GetSampledRequestsResponse

#get_size_constraint_set(params = {}) ⇒ Types::GetSizeConstraintSetResponse

#get_sql_injection_match_set(params = {}) ⇒ Types::GetSqlInjectionMatchSetResponse

#get_web_acl(params = {}) ⇒ Types::GetWebACLResponse

#get_web_acl_for_resource(params = {}) ⇒ Types::GetWebACLForResourceResponse

#get_xss_match_set(params = {}) ⇒ Types::GetXssMatchSetResponse

#list_activated_rules_in_rule_group(params = {}) ⇒ Types::ListActivatedRulesInRuleGroupResponse

#list_byte_match_sets(params = {}) ⇒ Types::ListByteMatchSetsResponse

#list_geo_match_sets(params = {}) ⇒ Types::ListGeoMatchSetsResponse

#list_ip_sets(params = {}) ⇒ Types::ListIPSetsResponse

#list_logging_configurations(params = {}) ⇒ Types::ListLoggingConfigurationsResponse

#list_rate_based_rules(params = {}) ⇒ Types::ListRateBasedRulesResponse

#list_regex_match_sets(params = {}) ⇒ Types::ListRegexMatchSetsResponse

#list_regex_pattern_sets(params = {}) ⇒ Types::ListRegexPatternSetsResponse

#list_resources_for_web_acl(params = {}) ⇒ Types::ListResourcesForWebACLResponse

#list_rule_groups(params = {}) ⇒ Types::ListRuleGroupsResponse

#list_rules(params = {}) ⇒ Types::ListRulesResponse

#list_size_constraint_sets(params = {}) ⇒ Types::ListSizeConstraintSetsResponse

#list_sql_injection_match_sets(params = {}) ⇒ Types::ListSqlInjectionMatchSetsResponse

#list_subscribed_rule_groups(params = {}) ⇒ Types::ListSubscribedRuleGroupsResponse

#list_tags_for_resource(params = {}) ⇒ Types::ListTagsForResourceResponse

#list_web_acls(params = {}) ⇒ Types::ListWebACLsResponse

#list_xss_match_sets(params = {}) ⇒ Types::ListXssMatchSetsResponse

#put_logging_configuration(params = {}) ⇒ Types::PutLoggingConfigurationResponse

#initialize(options) ⇒ `Client`

.identifier ⇒ `Object` (readonly)

.errors_module ⇒ `Object`

#associate_web_acl(params = {}) ⇒ `Struct`

#build_request(operation_name, params = {}) ⇒ `Object`

#create_byte_match_set(params = {}) ⇒ `Types::CreateByteMatchSetResponse`

#create_geo_match_set(params = {}) ⇒ `Types::CreateGeoMatchSetResponse`

#create_ip_set(params = {}) ⇒ `Types::CreateIPSetResponse`

#create_rate_based_rule(params = {}) ⇒ `Types::CreateRateBasedRuleResponse`

#create_regex_match_set(params = {}) ⇒ `Types::CreateRegexMatchSetResponse`

#create_regex_pattern_set(params = {}) ⇒ `Types::CreateRegexPatternSetResponse`

#create_rule(params = {}) ⇒ `Types::CreateRuleResponse`

#create_rule_group(params = {}) ⇒ `Types::CreateRuleGroupResponse`

#create_size_constraint_set(params = {}) ⇒ `Types::CreateSizeConstraintSetResponse`

#create_sql_injection_match_set(params = {}) ⇒ `Types::CreateSqlInjectionMatchSetResponse`

#create_web_acl(params = {}) ⇒ `Types::CreateWebACLResponse`

#create_web_acl_migration_stack(params = {}) ⇒ `Types::CreateWebACLMigrationStackResponse`

#create_xss_match_set(params = {}) ⇒ `Types::CreateXssMatchSetResponse`

#delete_byte_match_set(params = {}) ⇒ `Types::DeleteByteMatchSetResponse`

#delete_geo_match_set(params = {}) ⇒ `Types::DeleteGeoMatchSetResponse`

#delete_ip_set(params = {}) ⇒ `Types::DeleteIPSetResponse`

#delete_logging_configuration(params = {}) ⇒ `Struct`

#delete_permission_policy(params = {}) ⇒ `Struct`

#delete_rate_based_rule(params = {}) ⇒ `Types::DeleteRateBasedRuleResponse`

#delete_regex_match_set(params = {}) ⇒ `Types::DeleteRegexMatchSetResponse`

#delete_regex_pattern_set(params = {}) ⇒ `Types::DeleteRegexPatternSetResponse`

#delete_rule(params = {}) ⇒ `Types::DeleteRuleResponse`

#delete_rule_group(params = {}) ⇒ `Types::DeleteRuleGroupResponse`

#delete_size_constraint_set(params = {}) ⇒ `Types::DeleteSizeConstraintSetResponse`

#delete_sql_injection_match_set(params = {}) ⇒ `Types::DeleteSqlInjectionMatchSetResponse`

#delete_web_acl(params = {}) ⇒ `Types::DeleteWebACLResponse`

#delete_xss_match_set(params = {}) ⇒ `Types::DeleteXssMatchSetResponse`

#disassociate_web_acl(params = {}) ⇒ `Struct`

#get_byte_match_set(params = {}) ⇒ `Types::GetByteMatchSetResponse`

#get_change_token(params = {}) ⇒ `Types::GetChangeTokenResponse`

#get_change_token_status(params = {}) ⇒ `Types::GetChangeTokenStatusResponse`

#get_geo_match_set(params = {}) ⇒ `Types::GetGeoMatchSetResponse`

#get_ip_set(params = {}) ⇒ `Types::GetIPSetResponse`

#get_logging_configuration(params = {}) ⇒ `Types::GetLoggingConfigurationResponse`

#get_permission_policy(params = {}) ⇒ `Types::GetPermissionPolicyResponse`

#get_rate_based_rule(params = {}) ⇒ `Types::GetRateBasedRuleResponse`

#get_rate_based_rule_managed_keys(params = {}) ⇒ `Types::GetRateBasedRuleManagedKeysResponse`

#get_regex_match_set(params = {}) ⇒ `Types::GetRegexMatchSetResponse`

#get_regex_pattern_set(params = {}) ⇒ `Types::GetRegexPatternSetResponse`

#get_rule(params = {}) ⇒ `Types::GetRuleResponse`

#get_rule_group(params = {}) ⇒ `Types::GetRuleGroupResponse`

#get_sampled_requests(params = {}) ⇒ `Types::GetSampledRequestsResponse`

#get_size_constraint_set(params = {}) ⇒ `Types::GetSizeConstraintSetResponse`

#get_sql_injection_match_set(params = {}) ⇒ `Types::GetSqlInjectionMatchSetResponse`

#get_web_acl(params = {}) ⇒ `Types::GetWebACLResponse`

#get_web_acl_for_resource(params = {}) ⇒ `Types::GetWebACLForResourceResponse`

#get_xss_match_set(params = {}) ⇒ `Types::GetXssMatchSetResponse`

#list_activated_rules_in_rule_group(params = {}) ⇒ `Types::ListActivatedRulesInRuleGroupResponse`

#list_byte_match_sets(params = {}) ⇒ `Types::ListByteMatchSetsResponse`

#list_geo_match_sets(params = {}) ⇒ `Types::ListGeoMatchSetsResponse`

#list_ip_sets(params = {}) ⇒ `Types::ListIPSetsResponse`

#list_logging_configurations(params = {}) ⇒ `Types::ListLoggingConfigurationsResponse`

#list_rate_based_rules(params = {}) ⇒ `Types::ListRateBasedRulesResponse`

#list_regex_match_sets(params = {}) ⇒ `Types::ListRegexMatchSetsResponse`

#list_regex_pattern_sets(params = {}) ⇒ `Types::ListRegexPatternSetsResponse`

#list_resources_for_web_acl(params = {}) ⇒ `Types::ListResourcesForWebACLResponse`

#list_rule_groups(params = {}) ⇒ `Types::ListRuleGroupsResponse`

#list_rules(params = {}) ⇒ `Types::ListRulesResponse`

#list_size_constraint_sets(params = {}) ⇒ `Types::ListSizeConstraintSetsResponse`

#list_sql_injection_match_sets(params = {}) ⇒ `Types::ListSqlInjectionMatchSetsResponse`

#list_subscribed_rule_groups(params = {}) ⇒ `Types::ListSubscribedRuleGroupsResponse`

#list_tags_for_resource(params = {}) ⇒ `Types::ListTagsForResourceResponse`

#list_web_acls(params = {}) ⇒ `Types::ListWebACLsResponse`

#list_xss_match_sets(params = {}) ⇒ `Types::ListXssMatchSetsResponse`

#put_logging_configuration(params = {}) ⇒ `Types::PutLoggingConfigurationResponse`

#put_permission_policy(params = {}) ⇒ `Struct`

#tag_resource(params = {}) ⇒ `Struct`

#untag_resource(params = {}) ⇒ `Struct`

#update_byte_match_set(params = {}) ⇒ `Types::UpdateByteMatchSetResponse`

#update_geo_match_set(params = {}) ⇒ `Types::UpdateGeoMatchSetResponse`

#update_ip_set(params = {}) ⇒ `Types::UpdateIPSetResponse`

#update_rate_based_rule(params = {}) ⇒ `Types::UpdateRateBasedRuleResponse`

#update_regex_match_set(params = {}) ⇒ `Types::UpdateRegexMatchSetResponse`

#update_regex_pattern_set(params = {}) ⇒ `Types::UpdateRegexPatternSetResponse`

#update_rule(params = {}) ⇒ `Types::UpdateRuleResponse`