Class: Aws::MediaConvert::Types::H265Settings

Inherits:

Struct

Object
Struct
Aws::MediaConvert::Types::H265Settings

show all

Includes:: Structure

Defined in:: lib/aws-sdk-mediaconvert/types.rb

Overview

Settings for H265 codec

Constant Summary collapse

SENSITIVE =

[]

Instance Attribute Summary collapse

#adaptive_quantization ⇒ String

When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
#alternate_transfer_function_sei ⇒ String

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
#bandwidth_reduction_filter ⇒ Types::BandwidthReductionFilter

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate.
#bitrate ⇒ Integer

Specify the average bitrate in bits per second.
#codec_level ⇒ String

H.265 Level.
#codec_profile ⇒ String

Represents the Profile and Tier, per the HEVC (H.265) specification.
#dynamic_sub_gop ⇒ String

Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.
#end_of_stream_markers ⇒ String

Optionally include or suppress markers at the end of your output that signal the end of the video stream.
#flicker_adaptive_quantization ⇒ String

Enable this setting to have the encoder reduce I-frame pop.
#framerate_control ⇒ String

Use the Framerate setting to specify the frame rate for this output.
#framerate_conversion_algorithm ⇒ String

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
#framerate_denominator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
#framerate_numerator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
#gop_b_reference ⇒ String

Specify whether to allow B-frames to be referenced by other frame types.
#gop_closed_cadence ⇒ Integer

Specify the relative frequency of open to closed GOPs in this output.
#gop_size ⇒ Float

Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds.
#gop_size_units ⇒ String

Specify how the transcoder determines GOP size for this output.
#hrd_buffer_final_fill_percentage ⇒ Integer

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that’s available at the end of each encoded video segment.
#hrd_buffer_initial_fill_percentage ⇒ Integer

Percentage of the buffer that should initially be filled (HRD buffer model).
#hrd_buffer_size ⇒ Integer

Size of buffer (HRD buffer model) in bits.
#interlace_mode ⇒ String

Choose the scan line type for the output.
#max_bitrate ⇒ Integer

Maximum bitrate in bits/second.
#min_i_interval ⇒ Integer

Specify the minimum number of frames allowed between two IDR-frames in your output.
#number_b_frames_between_reference_frames ⇒ Integer

Specify the number of B-frames between reference frames in this output.
#number_reference_frames ⇒ Integer

Number of reference frames to use.
#par_control ⇒ String

Optional.
#par_denominator ⇒ Integer

Required when you set Pixel aspect ratio to SPECIFIED.
#par_numerator ⇒ Integer

Required when you set Pixel aspect ratio to SPECIFIED.
#quality_tuning_level ⇒ String

Optional.
#qvbr_settings ⇒ Types::H265QvbrSettings

Settings for quality-defined variable bitrate encoding with the H.265 codec.
#rate_control_mode ⇒ String

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
#sample_adaptive_offset_filter_mode ⇒ String

Specify Sample Adaptive Offset (SAO) filter strength.
#scan_type_conversion_mode ⇒ String

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
#scene_change_detect ⇒ String

Enable this setting to insert I-frames at scene changes that the service automatically detects.
#slices ⇒ Integer

Number of slices per picture.
#slow_pal ⇒ String

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
#spatial_adaptive_quantization ⇒ String

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity.
#telecine ⇒ String

This field applies only if the Streams > Advanced > Framerate field is set to 29.970.
#temporal_adaptive_quantization ⇒ String

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity.
#temporal_ids ⇒ String

Enables temporal layer identifiers in the encoded bitstream.
#tiles ⇒ String

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
#unregistered_sei_timecode ⇒ String

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
#write_mp_4_packaging_type ⇒ String

If the location of parameter set NAL units doesn’t matter in your workflow, ignore this setting.

Instance Attribute Details

#adaptive_quantization ⇒ `String`

When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#alternate_transfer_function_sei ⇒ `String`

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#bandwidth_reduction_filter ⇒ `Types::BandwidthReductionFilter`

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

Returns:

(Types::BandwidthReductionFilter)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#bitrate ⇒ `Integer`

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#codec_level ⇒ `String`

H.265 Level.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#codec_profile ⇒ `String`

Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so “Main/High” represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#dynamic_sub_gop ⇒ `String`

Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#end_of_stream_markers ⇒ `String`

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#flicker_adaptive_quantization ⇒ `String`

Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_control ⇒ `String`

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_conversion_algorithm ⇒ `String`

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_denominator ⇒ `Integer`

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_numerator ⇒ `Integer`

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_b_reference ⇒ `String`

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_closed_cadence ⇒ `Integer`

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don’t set this value to 0.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size ⇒ `Float`

Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

Returns:

(Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size_units ⇒ `String`

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don’t specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_final_fill_percentage ⇒ `Integer`

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that’s available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_initial_fill_percentage ⇒ `Integer`

Percentage of the buffer that should initially be filled (HRD buffer model).

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_size ⇒ `Integer`

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#interlace_mode ⇒ `String`

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that’s interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#max_bitrate ⇒ `Integer`

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#min_i_interval ⇒ `Integer`

Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output’s cadence-driven GOP. Use when your downstream systems require a regular GOP size.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#number_b_frames_between_reference_frames ⇒ `Integer`

Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#number_reference_frames ⇒ `Integer`

Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_control ⇒ `String`

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_denominator ⇒ `Integer`

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#par_numerator ⇒ `Integer`

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#quality_tuning_level ⇒ `String`

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#qvbr_settings ⇒ `Types::H265QvbrSettings`

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

Returns:

(Types::H265QvbrSettings)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#rate_control_mode ⇒ `String`

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#sample_adaptive_offset_filter_mode ⇒ `String`

Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#scan_type_conversion_mode ⇒ `String`

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn’t suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can’t use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#scene_change_detect ⇒ `String`

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#slices ⇒ `Integer`

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

Returns:

(Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#slow_pal ⇒ `String`

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#spatial_adaptive_quantization ⇒ `String`

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn’t take into account where the viewer’s attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#telecine ⇒ `String`

This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#temporal_adaptive_quantization ⇒ `String`

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren’t moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn’t take into account where the viewer’s attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn’t have moving objects with sharp edges, such as sports athletes’ faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#temporal_ids ⇒ `String`

Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#tiles ⇒ `String`

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#unregistered_sei_timecode ⇒ `String`

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

#write_mp_4_packaging_type ⇒ `String`

If the location of parameter set NAL units doesn’t matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

Returns:

(String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 6349

class H265Settings < Struct.new(
  :adaptive_quantization,
  :alternate_transfer_function_sei,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :sample_adaptive_offset_filter_mode,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :spatial_adaptive_quantization,
  :telecine,
  :temporal_adaptive_quantization,
  :temporal_ids,
  :tiles,
  :unregistered_sei_timecode,
  :write_mp_4_packaging_type)
  SENSITIVE = []
  include Aws::Structure
end

Class: Aws::MediaConvert::Types::H265Settings

Overview

Constant Summary collapse

Instance Attribute Summary collapse

Instance Attribute Details

#adaptive_quantization ⇒ String

#alternate_transfer_function_sei ⇒ String

#bandwidth_reduction_filter ⇒ Types::BandwidthReductionFilter

#bitrate ⇒ Integer

#codec_level ⇒ String

#codec_profile ⇒ String

#dynamic_sub_gop ⇒ String

#end_of_stream_markers ⇒ String

#flicker_adaptive_quantization ⇒ String

#framerate_control ⇒ String

#framerate_conversion_algorithm ⇒ String

#framerate_denominator ⇒ Integer

#framerate_numerator ⇒ Integer

#gop_b_reference ⇒ String

#gop_closed_cadence ⇒ Integer

#gop_size ⇒ Float

#gop_size_units ⇒ String

#hrd_buffer_final_fill_percentage ⇒ Integer

#hrd_buffer_initial_fill_percentage ⇒ Integer

#hrd_buffer_size ⇒ Integer

#interlace_mode ⇒ String

#max_bitrate ⇒ Integer

#min_i_interval ⇒ Integer

#number_b_frames_between_reference_frames ⇒ Integer

#number_reference_frames ⇒ Integer

#par_control ⇒ String

#par_denominator ⇒ Integer

#par_numerator ⇒ Integer

#quality_tuning_level ⇒ String

#qvbr_settings ⇒ Types::H265QvbrSettings

#rate_control_mode ⇒ String

#sample_adaptive_offset_filter_mode ⇒ String

#scan_type_conversion_mode ⇒ String

#scene_change_detect ⇒ String

#slices ⇒ Integer

#slow_pal ⇒ String

#spatial_adaptive_quantization ⇒ String

#telecine ⇒ String

#temporal_adaptive_quantization ⇒ String

#temporal_ids ⇒ String

#tiles ⇒ String

#unregistered_sei_timecode ⇒ String

#write_mp_4_packaging_type ⇒ String

#adaptive_quantization ⇒ `String`

#alternate_transfer_function_sei ⇒ `String`

#bandwidth_reduction_filter ⇒ `Types::BandwidthReductionFilter`

#bitrate ⇒ `Integer`

#codec_level ⇒ `String`

#codec_profile ⇒ `String`

#dynamic_sub_gop ⇒ `String`

#end_of_stream_markers ⇒ `String`

#flicker_adaptive_quantization ⇒ `String`

#framerate_control ⇒ `String`

#framerate_conversion_algorithm ⇒ `String`

#framerate_denominator ⇒ `Integer`

#framerate_numerator ⇒ `Integer`

#gop_b_reference ⇒ `String`

#gop_closed_cadence ⇒ `Integer`

#gop_size ⇒ `Float`

#gop_size_units ⇒ `String`

#hrd_buffer_final_fill_percentage ⇒ `Integer`

#hrd_buffer_initial_fill_percentage ⇒ `Integer`

#hrd_buffer_size ⇒ `Integer`

#interlace_mode ⇒ `String`

#max_bitrate ⇒ `Integer`

#min_i_interval ⇒ `Integer`

#number_b_frames_between_reference_frames ⇒ `Integer`

#number_reference_frames ⇒ `Integer`

#par_control ⇒ `String`

#par_denominator ⇒ `Integer`

#par_numerator ⇒ `Integer`

#quality_tuning_level ⇒ `String`

#qvbr_settings ⇒ `Types::H265QvbrSettings`

#rate_control_mode ⇒ `String`

#sample_adaptive_offset_filter_mode ⇒ `String`

#scan_type_conversion_mode ⇒ `String`

#scene_change_detect ⇒ `String`

#slices ⇒ `Integer`

#slow_pal ⇒ `String`

#spatial_adaptive_quantization ⇒ `String`

#telecine ⇒ `String`

#temporal_adaptive_quantization ⇒ `String`

#temporal_ids ⇒ `String`

#tiles ⇒ `String`

#unregistered_sei_timecode ⇒ `String`

#write_mp_4_packaging_type ⇒ `String`