Class: Aws::MediaConvert::Types::H264Settings

Inherits:

Struct

• Object
• Struct
• Aws::MediaConvert::Types::H264Settings

Includes:

Structure

Defined in:

lib/aws-sdk-mediaconvert/types.rb

Overview

Required when you set Codec to the value H_264.

See Also:

• AWS API Documentation

Constant Summary

SENSITIVE =

[]

Instance Attribute Summary

• #adaptive_quantization ⇒ String

  Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content.

• #bandwidth_reduction_filter ⇒ Types::BandwidthReductionFilter

  The Bandwidth reduction filter increases the video quality of your output relative to its bitrate.

• #bitrate ⇒ Integer

  Specify the average bitrate in bits per second.

• #codec_level ⇒ String

  Specify an H.264 level that is consistent with your output video settings.

• #codec_profile ⇒ String

  H.264 Profile.

• #dynamic_sub_gop ⇒ String

  Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.

• #end_of_stream_markers ⇒ String

  Optionally include or suppress markers at the end of your output that signal the end of the video stream.

• #entropy_encoding ⇒ String

  Entropy encoding mode.

• #field_encoding ⇒ String

  The video encoding method for your MPEG-4 AVC output.

• #flicker_adaptive_quantization ⇒ String

  Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization.

• #framerate_control ⇒ String

  If you are using the console, use the Framerate setting to specify the frame rate for this output.

• #framerate_conversion_algorithm ⇒ String

  Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.

• #framerate_denominator ⇒ Integer

  When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.

• #framerate_numerator ⇒ Integer

  When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.

• #gop_b_reference ⇒ String

  Specify whether to allow B-frames to be referenced by other frame types.

• #gop_closed_cadence ⇒ Integer

  Specify the relative frequency of open to closed GOPs in this output.

• #gop_size ⇒ Float

  Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds.

• #gop_size_units ⇒ String

  Specify how the transcoder determines GOP size for this output.

• #hrd_buffer_final_fill_percentage ⇒ Integer

  If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that’s available at the end of each encoded video segment.

• #hrd_buffer_initial_fill_percentage ⇒ Integer

  Percentage of the buffer that should initially be filled (HRD buffer model).

• #hrd_buffer_size ⇒ Integer

  Size of buffer (HRD buffer model) in bits.

• #interlace_mode ⇒ String

  Choose the scan line type for the output.

• #max_bitrate ⇒ Integer

  Maximum bitrate in bits/second.

• #min_i_interval ⇒ Integer

  Specify the minimum number of frames allowed between two IDR-frames in your output.

• #number_b_frames_between_reference_frames ⇒ Integer

  Specify the number of B-frames between reference frames in this output.

• #number_reference_frames ⇒ Integer

  Number of reference frames to use.

• #par_control ⇒ String

  Optional.

• #par_denominator ⇒ Integer

  Required when you set Pixel aspect ratio to SPECIFIED.

• #par_numerator ⇒ Integer

  Required when you set Pixel aspect ratio to SPECIFIED.

• #quality_tuning_level ⇒ String

  The Quality tuning level you choose represents a trade-off between the encoding speed of your job and the output video quality.

• #qvbr_settings ⇒ Types::H264QvbrSettings

  Settings for quality-defined variable bitrate encoding with the H.265 codec.

• #rate_control_mode ⇒ String

  Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

• #repeat_pps ⇒ String

  Places a PPS header on each encoded picture, even if repeated.

• #saliency_aware_encoding ⇒ String

  Specify whether to apply Saliency aware encoding to your output.

• #scan_type_conversion_mode ⇒ String

  Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.

• #scene_change_detect ⇒ String

  Enable this setting to insert I-frames at scene changes that the service automatically detects.

• #slices ⇒ Integer

  Number of slices per picture.

• #slow_pal ⇒ String

  Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).

• #softness ⇒ Integer

  Ignore this setting unless you need to comply with a specification that requires a specific value.

• #spatial_adaptive_quantization ⇒ String

  Only use this setting when you change the default value, Auto, for the setting H264AdaptiveQuantization.

• #syntax ⇒ String

  Produces a bitstream compliant with SMPTE RP-2027.

• #telecine ⇒ String

  When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture.

• #temporal_adaptive_quantization ⇒ String

  Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization.

• #unregistered_sei_timecode ⇒ String

  Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

Instance Attribute Details

#adaptive_quantization ⇒ String

Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto. Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don’t want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization to Off. Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#bandwidth_reduction_filter ⇒ Types::BandwidthReductionFilter

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

Returns:

• (Types::BandwidthReductionFilter)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#bitrate ⇒ Integer

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#codec_level ⇒ String

Specify an H.264 level that is consistent with your output video settings. If you aren’t sure what level to specify, choose Auto.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#codec_profile ⇒ String

H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#dynamic_sub_gop ⇒ String

Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#end_of_stream_markers ⇒ String

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#entropy_encoding ⇒ String

Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#field_encoding ⇒ String

The video encoding method for your MPEG-4 AVC output. Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field to disable PAFF encoding and create separate interlaced fields. Choose MBAFF to disable PAFF and have MediaConvert use MBAFF encoding for interlaced outputs.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#flicker_adaptive_quantization ⇒ String

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled. Change this value to Enabled to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_control ⇒ String

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_conversion_algorithm ⇒ String

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_denominator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_numerator ⇒ Integer

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#gop_b_reference ⇒ String

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#gop_closed_cadence ⇒ Integer

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. In the console, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don’t set this value to 0.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size ⇒ Float

Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

Returns:

• (Float)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size_units ⇒ String

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don’t specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_final_fill_percentage ⇒ Integer

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that’s available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_initial_fill_percentage ⇒ Integer

Percentage of the buffer that should initially be filled (HRD buffer model).

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#hrd_buffer_size ⇒ Integer

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#interlace_mode ⇒ String

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that’s interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#max_bitrate ⇒ Integer

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#min_i_interval ⇒ Integer

Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output’s cadence-driven GOP. Use when your downstream systems require a regular GOP size.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#number_b_frames_between_reference_frames ⇒ Integer

Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#number_reference_frames ⇒ Integer

Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#par_control ⇒ String

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#par_denominator ⇒ Integer

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#par_numerator ⇒ Integer

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#quality_tuning_level ⇒ String

The Quality tuning level you choose represents a trade-off between the encoding speed of your job and the output video quality. For the fastest encoding speed at the cost of video quality: Choose Single pass. For a good balance between encoding speed and video quality: Leave blank or keep the default value Single pass HQ. For the best video quality, at the cost of encoding speed: Choose Multi pass HQ. MediaConvert performs an analysis pass on your input followed by an encoding pass. Outputs that use this feature incur pro-tier pricing.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#qvbr_settings ⇒ Types::H264QvbrSettings

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

Returns:

• (Types::H264QvbrSettings)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#rate_control_mode ⇒ String

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#repeat_pps ⇒ String

Places a PPS header on each encoded picture, even if repeated.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#saliency_aware_encoding ⇒ String

Specify whether to apply Saliency aware encoding to your output. Use to improve the perceptual video quality of your output by allocating more encoding bits to the prominent or noticeable parts of your content. To apply saliency aware encoding, when possible: We recommend that you choose Preferred. The effects of Saliency aware encoding are best seen in lower bitrate outputs. When you choose Preferred, note that Saliency aware encoding will only apply to outputs that are 720p or higher in resolution. To not apply saliency aware encoding, prioritizing encoding speed over perceptual video quality: Choose Disabled.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#scan_type_conversion_mode ⇒ String

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn’t suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can’t use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#scene_change_detect ⇒ String

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#slices ⇒ Integer

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#slow_pal ⇒ String

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#softness ⇒ Integer

Ignore this setting unless you need to comply with a specification that requires a specific value. If you don’t have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness or by enabling a noise reducer filter. The Softness setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.

Returns:

• (Integer)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#spatial_adaptive_quantization ⇒ String

Only use this setting when you change the default value, Auto, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn’t take into account where the viewer’s attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#syntax ⇒ String

Produces a bitstream compliant with SMPTE RP-2027.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#telecine ⇒ String

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine produces a 29.97i output. Soft telecine produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#temporal_adaptive_quantization ⇒ String

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren’t moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn’t take into account where the viewer’s attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn’t have moving objects with sharp edges, such as sports athletes’ faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization. To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end

#unregistered_sei_timecode ⇒ String

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

Returns:

• (String)

# File 'lib/aws-sdk-mediaconvert/types.rb', line 5827

class H264Settings < Struct.new(
  :adaptive_quantization,
  :bandwidth_reduction_filter,
  :bitrate,
  :codec_level,
  :codec_profile,
  :dynamic_sub_gop,
  :end_of_stream_markers,
  :entropy_encoding,
  :field_encoding,
  :flicker_adaptive_quantization,
  :framerate_control,
  :framerate_conversion_algorithm,
  :framerate_denominator,
  :framerate_numerator,
  :gop_b_reference,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :hrd_buffer_final_fill_percentage,
  :hrd_buffer_initial_fill_percentage,
  :hrd_buffer_size,
  :interlace_mode,
  :max_bitrate,
  :min_i_interval,
  :number_b_frames_between_reference_frames,
  :number_reference_frames,
  :par_control,
  :par_denominator,
  :par_numerator,
  :quality_tuning_level,
  :qvbr_settings,
  :rate_control_mode,
  :repeat_pps,
  :saliency_aware_encoding,
  :scan_type_conversion_mode,
  :scene_change_detect,
  :slices,
  :slow_pal,
  :softness,
  :spatial_adaptive_quantization,
  :syntax,
  :telecine,
  :temporal_adaptive_quantization,
  :unregistered_sei_timecode)
  SENSITIVE = []
  include Aws::Structure
end